In the json_tokener_state_number case, explicitly adjust what "number" characters are allowed based on the exact micro-state that we're in, and check for invalid following characters in a different way, to allow a valid json_type_number object to be returned at the top level.

This causes previously failing strings like "123-456" to return a valid json_object with the appropriate value.  If you care about the trailing content, call json_tokener_parse_ex() and check the parse end point with json_tokener_get_parse_end().

ChangeLog

@@ -30,6 +30,9 @@ Other changes
 * Fix incremental parsing of numbers, especially those with exponents, e.g.
    so parsing "[0", "e+", "-]" now properly returns an error.
   Strict mode now rejects missing exponents ("0e").
+* Successfully return number objects at the top level even when they are
+   followed by a "-", "." or "e".  This makes parsing things like "123-45"
+   behave consistently with things like "123xyz".
 
 
 ***

json_object.c

@@ -54,7 +54,6 @@
 // Don't define this.  It's not thread-safe.
 /* #define REFCOUNT_DEBUG 1 */
 
-const char *json_number_chars = "0123456789.+-eE";
 const char *json_hex_chars = "0123456789abcdefABCDEF";
 
 static void json_object_generic_delete(struct json_object *jso);

json_object_private.h

@@ -98,7 +98,6 @@ struct json_object_string
 
 void _json_c_set_last_err(const char *err_fmt, ...);
 
-extern const char *json_number_chars;
 extern const char *json_hex_chars;
 
 #ifdef __cplusplus

json_tokener.c

@@ -193,7 +193,17 @@ struct json_object *json_tokener_parse_verbose(const char *str, enum json_tokene
 		return NULL;
 	obj = json_tokener_parse_ex(tok, str, -1);
 	*error = tok->err;
-	if (tok->err != json_tokener_success)
+	if (tok->err != json_tokener_success
+#if 0
+		/* This would be a more sensible default, and cause parsing
+		 * things like "null123" to fail when the caller can't know
+		 * where the parsing left off, but starting to fail would
+		 * be a notable behaviour change.  Save for a 1.0 release.
+		 */
+	    || json_tokener_get_parse_end(tok) != strlen(str)
+#endif
+	   )
+
 	{
 		if (obj != NULL)
 			json_object_put(obj);
@@ -838,7 +848,8 @@ struct json_object *json_tokener_parse_ex(struct json_tokener *tok, const char *
 			const char *case_start = str;
 			int case_len = 0;
 			int is_exponent = 0;
-			int negativesign_next_possible_location = 1;
+			int neg_sign_ok = 1;
+			int pos_sign_ok = 0;
 			if (printbuf_length(tok->pb) > 0)
 			{
 				/* We don't save all state from the previous incremental parse
@@ -852,14 +863,26 @@ struct json_object *json_tokener_parse_ex(struct json_tokener *tok, const char *
 					char *last_saved_char =
 					    &tok->pb->buf[printbuf_length(tok->pb) - 1];
 					is_exponent = 1;
+					pos_sign_ok = neg_sign_ok = 1;
 					/* If the "e" isn't at the end, we can't start with a '-' */
 					if (e_loc != last_saved_char)
-						negativesign_next_possible_location = -1;
+					{
+						neg_sign_ok = 0;
+						pos_sign_ok = 0;
+					}
 					// else leave it set to 1, i.e. start of the new input
 				}
 			}
-			while (c && strchr(json_number_chars, c))
+
+			while (c &&
+			    ((c >= '0' && c <= '9') ||
+				 (!is_exponent && (c=='e' || c=='E')) ||
+				 (neg_sign_ok && c=='-') ||
+				 (pos_sign_ok && c=='+') ||
+				 (!tok->is_double && c=='.')
+			 ))
 			{
+				pos_sign_ok = neg_sign_ok = 0;
 				++case_len;
 
 				/* non-digit characters checks */
@@ -871,40 +894,16 @@ struct json_object *json_tokener_parse_ex(struct json_tokener *tok, const char *
 				switch (c)
 				{
 				case '.':
-					if (tok->is_double != 0)
-					{
-						/* '.' can only be found once, and out of the exponent part.
-						 * Thus, if the input is already flagged as double, it
-						 * is invalid.
-						 */
-						tok->err = json_tokener_error_parse_number;
-						goto out;
-					}
 					tok->is_double = 1;
+					pos_sign_ok = 1;
+					neg_sign_ok = 1;
 					break;
 				case 'e': /* FALLTHRU */
 				case 'E':
-					if (is_exponent != 0)
-					{
-						/* only one exponent possible */
-						tok->err = json_tokener_error_parse_number;
-						goto out;
-					}
 					is_exponent = 1;
 					tok->is_double = 1;
 					/* the exponent part can begin with a negative sign */
-					negativesign_next_possible_location = case_len + 1;
+					pos_sign_ok = neg_sign_ok = 1;
-					break;
-				case '-':
-					if (case_len != negativesign_next_possible_location)
-					{
-						/* If the negative sign is not where expected (ie
-						 * start of input or start of exponent part), the
-						 * input is invalid.
-						 */
-						tok->err = json_tokener_error_parse_number;
-						goto out;
-					}
 					break;
 				default: break;
 				}
@@ -915,6 +914,22 @@ struct json_object *json_tokener_parse_ex(struct json_tokener *tok, const char *
 					goto out;
 				}
 			}
+			/*
+				Now we know c isn't a valid number char, but check whether
+				it might have been intended to be, and return a potentially
+				more understandable error right away.
+				However, if we're at the top-level, use the number as-is
+			    because c can be part of a new object to parse on the
+				next call to json_tokener_parse().
+			 */
+			if (tok->depth > 0 &&
+			    c != ',' && c != ']' && c != '}' && c != '/' &&
+				c != 'I' && c != 'i' &&
+			    !isspace((unsigned char)c))
+			{
+				tok->err = json_tokener_error_parse_number;
+				goto out;
+			}
 			if (case_len > 0)
 				printbuf_memappend_fast(tok->pb, case_start, case_len);
 

tests/test_parse.c

@@ -141,16 +141,18 @@ static void test_basic_parse()
 
 	single_basic_parse("12", 0);
 	single_basic_parse("12.3", 0);
-	single_basic_parse("12.3.4", 0); /* non-sensical, returns null */
-	/* was returning (int)2015 before patch, should return null */
-	single_basic_parse("2015-01-15", 0);
 
-	/* ...but this works.  It's rather inconsistent, and a future major release
+	/* Even though, when using json_tokener_parse() there's no way to
-	 * should change the behavior so it either always returns null when extra
+	 *  know when there is more data after the parsed object,
-	 * bytes are present (preferred), or always return object created from as much
+	 *  an object is successfully returned anyway (in some cases)
-	 * as was able to be parsed.
 	 */
+
+	single_basic_parse("12.3.4", 0);
+	single_basic_parse("2015-01-15", 0);
 	single_basic_parse("12.3xxx", 0);
+	single_basic_parse("12.3{\"a\":123}", 0);
+	single_basic_parse("12.3\n", 0);
+	single_basic_parse("12.3 ", 0);
 
 	single_basic_parse("{\"FoO\"  :   -12.3E512}", 0);
 	single_basic_parse("{\"FoO\"  :   -12.3e512}", 0);
@@ -368,7 +370,10 @@ struct incremental_step
     {"[0e-]", -1, -1, json_tokener_success, 1},
     {"[0e-]", -1, 4, json_tokener_error_parse_number, 1, JSON_TOKENER_STRICT},
 
-    {"0e+-", 5, 3, json_tokener_error_parse_number, 1},
+	/* You might expect this to fail, but it won't because
+	   it's a valid partial parse; note the char_offset: */
+    {"0e+-", 5, 3, json_tokener_success, 1},
+    {"0e+-", 5, 3, json_tokener_error_parse_number, 1, JSON_TOKENER_STRICT},
     {"[0e+-]", -1, 4, json_tokener_error_parse_number, 1},
 
     /* Similar tests for other kinds of objects: */
@@ -447,11 +452,22 @@ struct incremental_step
     {"{\"a\":1}{\"b\":2}", 15, 7, json_tokener_success, 0},
     {&"{\"a\":1}{\"b\":2}"[7], 8, 7, json_tokener_success, 1},
 
-    /* Some bad formatting. Check we get the correct error status
+	/*
-     * XXX this means we can't have two numbers in the incremental parse
+	 * Though this may seem invalid at first glance, it
-     * XXX stream with the second one being a negative number!
+	 * parses as three separate numbers, 2015, -1 and -15
-     */
+	 * Of course, simply pasting together a stream of arbitrary
-    {"2015-01-15", 10, 4, json_tokener_error_parse_number, 1},
+	 * positive numbers won't work, since there'll be no way to
+     * tell where in e.g. "2015015" the next number stats, so
+	 * a reliably parsable stream must not include json_type_int
+	 * or json_type_double objects without some other delimiter.
+	 * e.g. whitespace
+	 */
+    {&"2015-01-15"[0], 11, 4, json_tokener_success, 1},
+    {&"2015-01-15"[4], 7, 3, json_tokener_success, 1},
+    {&"2015-01-15"[7], 4, 3, json_tokener_success, 1},
+    {&"2015 01 15"[0], 11, 5, json_tokener_success, 1},
+    {&"2015 01 15"[4], 7, 4, json_tokener_success, 1},
+    {&"2015 01 15"[7], 4, 3, json_tokener_success, 1},
 
     /* Strings have a well defined end point, so we can stop at the quote */
     {"\"blue\"", -1, -1, json_tokener_success, 0},

tests/test_parse.expected

@@ -40,9 +40,13 @@ new_obj.to_string(nAn)=NaN
 new_obj.to_string(iNfinity)=Infinity
 new_obj.to_string(12)=12
 new_obj.to_string(12.3)=12.3
-new_obj.to_string(12.3.4)=null
+new_obj.to_string(12.3.4)=12.3
-new_obj.to_string(2015-01-15)=null
+new_obj.to_string(2015-01-15)=2015
 new_obj.to_string(12.3xxx)=12.3
+new_obj.to_string(12.3{"a":123})=12.3
+new_obj.to_string(12.3
+)=12.3
+new_obj.to_string(12.3 )=12.3
 new_obj.to_string({"FoO"  :   -12.3E512})={ "FoO": -12.3E512 }
 new_obj.to_string({"FoO"  :   -12.3e512})={ "FoO": -12.3e512 }
 new_obj.to_string({"FoO"  :   -12.3E51.2})=null
@@ -162,6 +166,7 @@ json_tokener_parse_ex(tok, 0e-         ,   4) ... OK: got object of type [double
 json_tokener_parse_ex(tok, 0e-         ,   4) ... OK: got correct error: unexpected end of data
 json_tokener_parse_ex(tok, [0e-]       ,   5) ... OK: got object of type [array]: [ 0 ]
 json_tokener_parse_ex(tok, [0e-]       ,   5) ... OK: got correct error: number expected
+json_tokener_parse_ex(tok, 0e+-        ,   5) ... OK: got object of type [double]: 0
 json_tokener_parse_ex(tok, 0e+-        ,   5) ... OK: got correct error: number expected
 json_tokener_parse_ex(tok, [0e+-]      ,   6) ... OK: got correct error: number expected
 json_tokener_parse_ex(tok, false       ,   5) ... OK: got correct error: continue
@@ -215,7 +220,12 @@ json_tokener_parse_ex(tok, nullx       ,   6) ... OK: got object of type [null]:
 json_tokener_parse_ex(tok, x           ,   2) ... OK: got correct error: unexpected character
 json_tokener_parse_ex(tok, {"a":1}{"b":2},  15) ... OK: got object of type [object]: { "a": 1 }
 json_tokener_parse_ex(tok, {"b":2}     ,   8) ... OK: got object of type [object]: { "b": 2 }
-json_tokener_parse_ex(tok, 2015-01-15  ,  10) ... OK: got correct error: number expected
+json_tokener_parse_ex(tok, 2015-01-15  ,  11) ... OK: got object of type [int]: 2015
+json_tokener_parse_ex(tok, -01-15      ,   7) ... OK: got object of type [int]: -1
+json_tokener_parse_ex(tok, -15         ,   4) ... OK: got object of type [int]: -15
+json_tokener_parse_ex(tok, 2015 01 15  ,  11) ... OK: got object of type [int]: 2015
+json_tokener_parse_ex(tok,  01 15      ,   7) ... OK: got object of type [int]: 1
+json_tokener_parse_ex(tok,  15         ,   4) ... OK: got object of type [int]: 15
 json_tokener_parse_ex(tok, "blue"      ,   6) ... OK: got object of type [string]: "blue"
 json_tokener_parse_ex(tok, "\""        ,   4) ... OK: got object of type [string]: "\""
 json_tokener_parse_ex(tok, "\\"        ,   4) ... OK: got object of type [string]: "\\"
@@ -265,5 +275,5 @@ json_tokener_parse_ex(tok, "\ud855
 json_tokener_parse_ex(tok, "\ud0031<33>"  ,  10) ... OK: got correct error: invalid utf-8 string
 json_tokener_parse_ex(tok, 11<31>11       ,   5) ... OK: got correct error: invalid utf-8 string
 json_tokener_parse_ex(tok, {"1<>":1}    ,   8) ... OK: got correct error: invalid utf-8 string
-End Incremental Tests OK=179 ERROR=0
+End Incremental Tests OK=185 ERROR=0
 ==================================