mirror/libbpf
1
0
Fork 0
mirror of https://github.com/netdata/libbpf.git synced 2026-03-13 21:09:07 +08:00
Code Issues Packages Projects Releases Wiki Activity

tools: Sync if_link.h uapi tooling header

Browse Source 
Sync if_link uapi header to the latest version as we need the refresher
in tooling for netkit device. Given it's been a while since the last sync
and the diff is fairly big, it has been done as its own commit.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20241004101335.117711-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This commit is contained in:
Daniel Borkmann
2024-10-04 12:13:34 +02:00
committed by Andrii Nakryiko
parent c9a728c329
commit ba2ba19f6d
1 changed files with 552 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

553
include/uapi/linux/if_link.h
View File

@@ -462,6 +462,286 @@ enum in6_addr_gen_mode {
/* Bridge section */
/**
* DOC: Bridge enum definition
*
* Please *note* that the timer values in the following section are expected
* in clock_t format, which is seconds multiplied by USER_HZ (generally
* defined as 100).
*
* @IFLA_BR_FORWARD_DELAY
* The bridge forwarding delay is the time spent in LISTENING state
* (before moving to LEARNING) and in LEARNING state (before moving
* to FORWARDING). Only relevant if STP is enabled.
*
* The valid values are between (2 * USER_HZ) and (30 * USER_HZ).
* The default value is (15 * USER_HZ).
*
* @IFLA_BR_HELLO_TIME
* The time between hello packets sent by the bridge, when it is a root
* bridge or a designated bridge. Only relevant if STP is enabled.
*
* The valid values are between (1 * USER_HZ) and (10 * USER_HZ).
* The default value is (2 * USER_HZ).
*
* @IFLA_BR_MAX_AGE
* The hello packet timeout is the time until another bridge in the
* spanning tree is assumed to be dead, after reception of its last hello
* message. Only relevant if STP is enabled.
*
* The valid values are between (6 * USER_HZ) and (40 * USER_HZ).
* The default value is (20 * USER_HZ).
*
* @IFLA_BR_AGEING_TIME
* Configure the bridge's FDB entries aging time. It is the time a MAC
* address will be kept in the FDB after a packet has been received from
* that address. After this time has passed, entries are cleaned up.
* Allow values outside the 802.1 standard specification for special cases:
*
* * 0 - entry never ages (all permanent)
* * 1 - entry disappears (no persistence)
*
* The default value is (300 * USER_HZ).
*
* @IFLA_BR_STP_STATE
* Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off
* (*IFLA_BR_STP_STATE* == 0) for this bridge.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_PRIORITY
* Set this bridge's spanning tree priority, used during STP root bridge
* election.
*
* The valid values are between 0 and 65535.
*
* @IFLA_BR_VLAN_FILTERING
* Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off
* (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not
* consider the VLAN tag when handling packets.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_VLAN_PROTOCOL
* Set the protocol used for VLAN filtering.
*
* The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value
* is 0x8100(802.1Q).
*
* @IFLA_BR_GROUP_FWD_MASK
* The group forwarding mask. This is the bitmask that is applied to
* decide whether to forward incoming frames destined to link-local
* addresses (of the form 01:80:C2:00:00:0X).
*
* The default value is 0, which means the bridge does not forward any
* link-local frames coming on this port.
*
* @IFLA_BR_ROOT_ID
* The bridge root id, read only.
*
* @IFLA_BR_BRIDGE_ID
* The bridge id, read only.
*
* @IFLA_BR_ROOT_PORT
* The bridge root port, read only.
*
* @IFLA_BR_ROOT_PATH_COST
* The bridge root path cost, read only.
*
* @IFLA_BR_TOPOLOGY_CHANGE
* The bridge topology change, read only.
*
* @IFLA_BR_TOPOLOGY_CHANGE_DETECTED
* The bridge topology change detected, read only.
*
* @IFLA_BR_HELLO_TIMER
* The bridge hello timer, read only.
*
* @IFLA_BR_TCN_TIMER
* The bridge tcn timer, read only.
*
* @IFLA_BR_TOPOLOGY_CHANGE_TIMER
* The bridge topology change timer, read only.
*
* @IFLA_BR_GC_TIMER
* The bridge gc timer, read only.
*
* @IFLA_BR_GROUP_ADDR
* Set the MAC address of the multicast group this bridge uses for STP.
* The address must be a link-local address in standard Ethernet MAC address
* format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f].
*
* The default value is 0.
*
* @IFLA_BR_FDB_FLUSH
* Flush bridge's fdb dynamic entries.
*
* @IFLA_BR_MCAST_ROUTER
* Set bridge's multicast router if IGMP snooping is enabled.
* The valid values are:
*
* * 0 - disabled.
* * 1 - automatic (queried).
* * 2 - permanently enabled.
*
* The default value is 1.
*
* @IFLA_BR_MCAST_SNOOPING
* Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off
* (*IFLA_BR_MCAST_SNOOPING* == 0).
*
* The default value is 1.
*
* @IFLA_BR_MCAST_QUERY_USE_IFADDR
* If enabled use the bridge's own IP address as source address for IGMP
* queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0
* (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0).
*
* The default value is 0 (disabled).
*
* @IFLA_BR_MCAST_QUERIER
* Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable
* (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast
* queries by the bridge.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_MCAST_HASH_ELASTICITY
* Set multicast database hash elasticity, It is the maximum chain length in
* the multicast hash table. This attribute is *deprecated* and the value
* is always 16.
*
* @IFLA_BR_MCAST_HASH_MAX
* Set maximum size of the multicast hash table
*
* The default value is 4096, the value must be a power of 2.
*
* @IFLA_BR_MCAST_LAST_MEMBER_CNT
* The Last Member Query Count is the number of Group-Specific Queries
* sent before the router assumes there are no local members. The Last
* Member Query Count is also the number of Group-and-Source-Specific
* Queries sent before the router assumes there are no listeners for a
* particular source.
*
* The default value is 2.
*
* @IFLA_BR_MCAST_STARTUP_QUERY_CNT
* The Startup Query Count is the number of Queries sent out on startup,
* separated by the Startup Query Interval.
*
* The default value is 2.
*
* @IFLA_BR_MCAST_LAST_MEMBER_INTVL
* The Last Member Query Interval is the Max Response Time inserted into
* Group-Specific Queries sent in response to Leave Group messages, and
* is also the amount of time between Group-Specific Query messages.
*
* The default value is (1 * USER_HZ).
*
* @IFLA_BR_MCAST_MEMBERSHIP_INTVL
* The interval after which the bridge will leave a group, if no membership
* reports for this group are received.
*
* The default value is (260 * USER_HZ).
*
* @IFLA_BR_MCAST_QUERIER_INTVL
* The interval between queries sent by other routers. if no queries are
* seen after this delay has passed, the bridge will start to send its own
* queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled).
*
* The default value is (255 * USER_HZ).
*
* @IFLA_BR_MCAST_QUERY_INTVL
* The Query Interval is the interval between General Queries sent by
* the Querier.
*
* The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ).
*
* @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
* The Max Response Time used to calculate the Max Resp Code inserted
* into the periodic General Queries.
*
* The default value is (10 * USER_HZ).
*
* @IFLA_BR_MCAST_STARTUP_QUERY_INTVL
* The interval between queries in the startup phase.
*
* The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ).
*
* @IFLA_BR_NF_CALL_IPTABLES
* Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0)
* iptables hooks on the bridge.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_NF_CALL_IP6TABLES
* Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0)
* ip6tables hooks on the bridge.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_NF_CALL_ARPTABLES
* Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0)
* arptables hooks on the bridge.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_VLAN_DEFAULT_PVID
* VLAN ID applied to untagged and priority-tagged incoming packets.
*
* The default value is 1. Setting to the special value 0 makes all ports of
* this bridge not have a PVID by default, which means that they will
* not accept VLAN-untagged traffic.
*
* @IFLA_BR_PAD
* Bridge attribute padding type for netlink message.
*
* @IFLA_BR_VLAN_STATS_ENABLED
* Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable
* (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_MCAST_STATS_ENABLED
* Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable
* (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats
* accounting.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_MCAST_IGMP_VERSION
* Set the IGMP version.
*
* The valid values are 2 and 3. The default value is 2.
*
* @IFLA_BR_MCAST_MLD_VERSION
* Set the MLD version.
*
* The valid values are 1 and 2. The default value is 1.
*
* @IFLA_BR_VLAN_STATS_PER_PORT
* Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable
* (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting.
* Can be changed only when there are no port VLANs configured.
*
* The default value is 0 (disabled).
*
* @IFLA_BR_MULTI_BOOLOPT
* The multi_boolopt is used to control new boolean options to avoid adding
* new netlink attributes. You can look at ``enum br_boolopt_id`` for those
* options.
*
* @IFLA_BR_MCAST_QUERIER_STATE
* Bridge mcast querier states, read only.
*
* @IFLA_BR_FDB_N_LEARNED
* The number of dynamically learned FDB entries for the current bridge,
* read only.
*
* @IFLA_BR_FDB_MAX_LEARNED
* Set the number of max dynamically learned FDB entries for the current
* bridge.
*/
enum {
IFLA_BR_UNSPEC,
IFLA_BR_FORWARD_DELAY,
@@ -511,6 +791,8 @@ enum {
IFLA_BR_VLAN_STATS_PER_PORT,
IFLA_BR_MULTI_BOOLOPT,
IFLA_BR_MCAST_QUERIER_STATE,
IFLA_BR_FDB_N_LEARNED,
IFLA_BR_FDB_MAX_LEARNED,
__IFLA_BR_MAX,
};
@@ -521,11 +803,252 @@ struct ifla_bridge_id {
__u8 addr[6]; /* ETH_ALEN */
};
/**
* DOC: Bridge mode enum definition
*
* @BRIDGE_MODE_HAIRPIN
* Controls whether traffic may be sent back out of the port on which it
* was received. This option is also called reflective relay mode, and is
* used to support basic VEPA (Virtual Ethernet Port Aggregator)
* capabilities. By default, this flag is turned off and the bridge will
* not forward traffic back out of the receiving port.
*/
enum {
BRIDGE_MODE_UNSPEC,
BRIDGE_MODE_HAIRPIN,
};
/**
* DOC: Bridge port enum definition
*
* @IFLA_BRPORT_STATE
* The operation state of the port. Here are the valid values.
*
* * 0 - port is in STP *DISABLED* state. Make this port completely
* inactive for STP. This is also called BPDU filter and could be used
* to disable STP on an untrusted port, like a leaf virtual device.
* The traffic forwarding is also stopped on this port.
* * 1 - port is in STP *LISTENING* state. Only valid if STP is enabled
* on the bridge. In this state the port listens for STP BPDUs and
* drops all other traffic frames.
* * 2 - port is in STP *LEARNING* state. Only valid if STP is enabled on
* the bridge. In this state the port will accept traffic only for the
* purpose of updating MAC address tables.
* * 3 - port is in STP *FORWARDING* state. Port is fully active.
* * 4 - port is in STP *BLOCKING* state. Only valid if STP is enabled on
* the bridge. This state is used during the STP election process.
* In this state, port will only process STP BPDUs.
*
* @IFLA_BRPORT_PRIORITY
* The STP port priority. The valid values are between 0 and 255.
*
* @IFLA_BRPORT_COST
* The STP path cost of the port. The valid values are between 1 and 65535.
*
* @IFLA_BRPORT_MODE
* Set the bridge port mode. See *BRIDGE_MODE_HAIRPIN* for more details.
*
* @IFLA_BRPORT_GUARD
* Controls whether STP BPDUs will be processed by the bridge port. By
* default, the flag is turned off to allow BPDU processing. Turning this
* flag on will disable the bridge port if a STP BPDU packet is received.
*
* If the bridge has Spanning Tree enabled, hostile devices on the network
* may send BPDU on a port and cause network failure. Setting *guard on*
* will detect and stop this by disabling the port. The port will be
* restarted if the link is brought down, or removed and reattached.
*
* @IFLA_BRPORT_PROTECT
* Controls whether a given port is allowed to become a root port or not.
* Only used when STP is enabled on the bridge. By default the flag is off.
*
* This feature is also called root port guard. If BPDU is received from a
* leaf (edge) port, it should not be elected as root port. This could
* be used if using STP on a bridge and the downstream bridges are not fully
* trusted; this prevents a hostile guest from rerouting traffic.
*
* @IFLA_BRPORT_FAST_LEAVE
* This flag allows the bridge to immediately stop multicast traffic
* forwarding on a port that receives an IGMP Leave message. It is only used
* when IGMP snooping is enabled on the bridge. By default the flag is off.
*
* @IFLA_BRPORT_LEARNING
* Controls whether a given port will learn *source* MAC addresses from
* received traffic or not. Also controls whether dynamic FDB entries
* (which can also be added by software) will be refreshed by incoming
* traffic. By default this flag is on.
*
* @IFLA_BRPORT_UNICAST_FLOOD
* Controls whether unicast traffic for which there is no FDB entry will
* be flooded towards this port. By default this flag is on.
*
* @IFLA_BRPORT_PROXYARP
* Enable proxy ARP on this port.
*
* @IFLA_BRPORT_LEARNING_SYNC
* Controls whether a given port will sync MAC addresses learned on device
* port to bridge FDB.
*
* @IFLA_BRPORT_PROXYARP_WIFI
* Enable proxy ARP on this port which meets extended requirements by
* IEEE 802.11 and Hotspot 2.0 specifications.
*
* @IFLA_BRPORT_ROOT_ID
*
* @IFLA_BRPORT_BRIDGE_ID
*
* @IFLA_BRPORT_DESIGNATED_PORT
*
* @IFLA_BRPORT_DESIGNATED_COST
*
* @IFLA_BRPORT_ID
*
* @IFLA_BRPORT_NO
*
* @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK
*
* @IFLA_BRPORT_CONFIG_PENDING
*
* @IFLA_BRPORT_MESSAGE_AGE_TIMER
*
* @IFLA_BRPORT_FORWARD_DELAY_TIMER
*
* @IFLA_BRPORT_HOLD_TIMER
*
* @IFLA_BRPORT_FLUSH
* Flush bridge ports' fdb dynamic entries.
*
* @IFLA_BRPORT_MULTICAST_ROUTER
* Configure the port's multicast router presence. A port with
* a multicast router will receive all multicast traffic.
* The valid values are:
*
* * 0 disable multicast routers on this port
* * 1 let the system detect the presence of routers (default)
* * 2 permanently enable multicast traffic forwarding on this port
* * 3 enable multicast routers temporarily on this port, not depending
* on incoming queries.
*
* @IFLA_BRPORT_PAD
*
* @IFLA_BRPORT_MCAST_FLOOD
* Controls whether a given port will flood multicast traffic for which
* there is no MDB entry. By default this flag is on.
*
* @IFLA_BRPORT_MCAST_TO_UCAST
* Controls whether a given port will replicate packets using unicast
* instead of multicast. By default this flag is off.
*
* This is done by copying the packet per host and changing the multicast
* destination MAC to a unicast one accordingly.
*
* *mcast_to_unicast* works on top of the multicast snooping feature of the
* bridge. Which means unicast copies are only delivered to hosts which
* are interested in unicast and signaled this via IGMP/MLD reports previously.
*
* This feature is intended for interface types which have a more reliable
* and/or efficient way to deliver unicast packets than broadcast ones
* (e.g. WiFi).
*
* However, it should only be enabled on interfaces where no IGMPv2/MLDv1
* report suppression takes place. IGMP/MLD report suppression issue is
* usually overcome by the network daemon (supplicant) enabling AP isolation
* and by that separating all STAs.
*
* Delivery of STA-to-STA IP multicast is made possible again by enabling
* and utilizing the bridge hairpin mode, which considers the incoming port
* as a potential outgoing port, too (see *BRIDGE_MODE_HAIRPIN* option).
* Hairpin mode is performed after multicast snooping, therefore leading
* to only deliver reports to STAs running a multicast router.
*
* @IFLA_BRPORT_VLAN_TUNNEL
* Controls whether vlan to tunnel mapping is enabled on the port.
* By default this flag is off.
*
* @IFLA_BRPORT_BCAST_FLOOD
* Controls flooding of broadcast traffic on the given port. By default
* this flag is on.
*
* @IFLA_BRPORT_GROUP_FWD_MASK
* Set the group forward mask. This is a bitmask that is applied to
* decide whether to forward incoming frames destined to link-local
* addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults
* to 0, which means the bridge does not forward any link-local frames
* coming on this port).
*
* @IFLA_BRPORT_NEIGH_SUPPRESS
* Controls whether neighbor discovery (arp and nd) proxy and suppression
* is enabled on the port. By default this flag is off.
*
* @IFLA_BRPORT_ISOLATED
* Controls whether a given port will be isolated, which means it will be
* able to communicate with non-isolated ports only. By default this
* flag is off.
*
* @IFLA_BRPORT_BACKUP_PORT
* Set a backup port. If the port loses carrier all traffic will be
* redirected to the configured backup port. Set the value to 0 to disable
* it.
*
* @IFLA_BRPORT_MRP_RING_OPEN
*
* @IFLA_BRPORT_MRP_IN_OPEN
*
* @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT
* The number of per-port EHT hosts limit. The default value is 512.
* Setting to 0 is not allowed.
*
* @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT
* The current number of tracked hosts, read only.
*
* @IFLA_BRPORT_LOCKED
* Controls whether a port will be locked, meaning that hosts behind the
* port will not be able to communicate through the port unless an FDB
* entry with the unit's MAC address is in the FDB. The common use case is
* that hosts are allowed access through authentication with the IEEE 802.1X
* protocol or based on whitelists. By default this flag is off.
*
* Please note that secure 802.1X deployments should always use the
* *BR_BOOLOPT_NO_LL_LEARN* flag, to not permit the bridge to populate its
* FDB based on link-local (EAPOL) traffic received on the port.
*
* @IFLA_BRPORT_MAB
* Controls whether a port will use MAC Authentication Bypass (MAB), a
* technique through which select MAC addresses may be allowed on a locked
* port, without using 802.1X authentication. Packets with an unknown source
* MAC address generates a "locked" FDB entry on the incoming bridge port.
* The common use case is for user space to react to these bridge FDB
* notifications and optionally replace the locked FDB entry with a normal
* one, allowing traffic to pass for whitelisted MAC addresses.
*
* Setting this flag also requires *IFLA_BRPORT_LOCKED* and
* *IFLA_BRPORT_LEARNING*. *IFLA_BRPORT_LOCKED* ensures that unauthorized
* data packets are dropped, and *IFLA_BRPORT_LEARNING* allows the dynamic
* FDB entries installed by user space (as replacements for the locked FDB
* entries) to be refreshed and/or aged out.
*
* @IFLA_BRPORT_MCAST_N_GROUPS
*
* @IFLA_BRPORT_MCAST_MAX_GROUPS
* Sets the maximum number of MDB entries that can be registered for a
* given port. Attempts to register more MDB entries at the port than this
* limit allows will be rejected, whether they are done through netlink
* (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a
* limit of 0 disables the limit. The default value is 0.
*
* @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS
* Controls whether neighbor discovery (arp and nd) proxy and suppression is
* enabled for a given port. By default this flag is off.
*
* Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS*
* is enabled for a given port.
*
* @IFLA_BRPORT_BACKUP_NHID
* The FDB nexthop object ID to attach to packets being redirected to a
* backup port that has VLAN tunnel mapping enabled (via the
* *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has
* the effect of not attaching any ID.
*/
enum {
IFLA_BRPORT_UNSPEC,
IFLA_BRPORT_STATE, /* Spanning tree state */
@@ -770,6 +1293,19 @@ enum netkit_mode {
NETKIT_L3,
};
/* NETKIT_SCRUB_NONE leaves clearing skb->{mark,priority} up to
* the BPF program if attached. This also means the latter can
* consume the two fields if they were populated earlier.
*
* NETKIT_SCRUB_DEFAULT zeroes skb->{mark,priority} fields before
* invoking the attached BPF program when the peer device resides
* in a different network namespace. This is the default behavior.
*/
enum netkit_scrub {
NETKIT_SCRUB_NONE,
NETKIT_SCRUB_DEFAULT,
};
enum {
IFLA_NETKIT_UNSPEC,
IFLA_NETKIT_PEER_INFO,
@@ -777,6 +1313,8 @@ enum {
IFLA_NETKIT_POLICY,
IFLA_NETKIT_PEER_POLICY,
IFLA_NETKIT_MODE,
IFLA_NETKIT_SCRUB,
IFLA_NETKIT_PEER_SCRUB,
__IFLA_NETKIT_MAX,
};
#define IFLA_NETKIT_MAX (__IFLA_NETKIT_MAX - 1)
@@ -855,6 +1393,7 @@ enum {
IFLA_VXLAN_DF,
IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */
IFLA_VXLAN_LOCALBYPASS,
IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */
__IFLA_VXLAN_MAX
};
#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
@@ -872,6 +1411,13 @@ enum ifla_vxlan_df {
VXLAN_DF_MAX = __VXLAN_DF_END - 1,
};
enum ifla_vxlan_label_policy {
VXLAN_LABEL_FIXED = 0,
VXLAN_LABEL_INHERIT = 1,
__VXLAN_LABEL_END,
VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1,
};
/* GENEVE section */
enum {
IFLA_GENEVE_UNSPEC,
@@ -936,6 +1482,8 @@ enum {
IFLA_GTP_ROLE,
IFLA_GTP_CREATE_SOCKETS,
IFLA_GTP_RESTART_COUNT,
IFLA_GTP_LOCAL,
IFLA_GTP_LOCAL6,
__IFLA_GTP_MAX,
};
#define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1)
@@ -1241,6 +1789,7 @@ enum {
IFLA_HSR_PROTOCOL, /* Indicate different protocol than
* HSR. For example PRP.
*/
IFLA_HSR_INTERLINK, /* HSR interlink network device */
__IFLA_HSR_MAX,
};
@@ -1418,7 +1967,9 @@ enum {
enum {
IFLA_DSA_UNSPEC,
IFLA_DSA_MASTER,
IFLA_DSA_CONDUIT,
/* Deprecated, use IFLA_DSA_CONDUIT instead */
IFLA_DSA_MASTER = IFLA_DSA_CONDUIT,
__IFLA_DSA_MAX,
};