Commit 051d44209842 ("net/sched: Retire CBQ qdisc") retired the CBQ qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fb38306ceb9e ("net/sched: Retire ATM qdisc") retired the ATM qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bbe77c14ee61 ("net/sched: Retire dsmark qdisc") retired the dsmark
classifier. Remove UAPI support for it.
Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 8c710f75256b ("net/sched: Retire tcindex classifier") retired the TC
tcindex classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 265b4da82dbf ("net/sched: Retire rsvp classifier") retired the TC RSVP
classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To stay consistent with the naming pattern used for similar cases in BPF
UAPI (__MAX_BPF_ATTACH_TYPE, etc), rename MAX_BPF_LINK_TYPE into
__MAX_BPF_LINK_TYPE.
Also similar to MAX_BPF_ATTACH_TYPE and MAX_BPF_REG, add:
#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
Not all __MAX_xxx enums have such #define, so I'm not sure if we should
add it or not, but I figured I'll start with a completely backwards
compatible way, and we can drop that, if necessary.
Also adjust a selftest that used MAX_BPF_LINK_TYPE enum.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231206190920.1651226-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add basic support of BPF token to BPF_PROG_LOAD. Wire through a set of
allowed BPF program types and attach types, derived from BPF FS at BPF
token creation time. Then make sure we perform bpf_token_capable()
checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BTF loading is a pretty straightforward
operation, so as long as BPF token is created with allow_cmds granting
BPF_BTF_LOAD command, kernel proceeds to parsing BTF data and creating
BTF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change actually defines the (initial) metadata layout
that should be used by AF_XDP userspace (xsk_tx_metadata).
The first field is flags which requests appropriate offloads,
followed by the offload-specific fields. The supported per-device
offloads are exported via netlink (new xsk-flags).
The offloads themselves are still implemented in a bit of a
framework-y fashion that's left from my initial kfunc attempt.
I'm introducing new xsk_tx_metadata_ops which drivers are
supposed to implement. The drivers are also supposed
to call xsk_tx_metadata_request/xsk_tx_metadata_complete in
the right places. Since xsk_tx_metadata_{request,_complete}
are static inline, we don't incur any extra overhead doing
indirect calls.
The benefit of this scheme is as follows:
- keeps all metadata layout parsing away from driver code
- makes it easy to grep and see which drivers implement what
- don't need any extra flags to maintain to keep track of what
offloads are implemented; if the callback is implemented - the offload
is supported (used by netlink reporting code)
Two offloads are defined right now:
1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset
2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata
area upon completion (tx_timestamp field)
XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes
SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass
metadata pointer).
The struct is forward-compatible and can be extended in the future
by appending more fields.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For zerocopy mode, tx_desc->addr can point to an arbitrary offset
and carry some TX metadata in the headroom. For copy mode, there
is no way currently to populate skb metadata.
Introduce new tx_metadata_len umem config option that indicates how many
bytes to treat as metadata. Metadata bytes come prior to tx_desc address
(same as in RX case).
The size of the metadata has mostly the same constraints as XDP:
- less than 256 bytes
- 8-byte aligned (compared to 4-byte alignment on xdp, due to 8-byte
timestamp in the completion)
- non-zero
This data is not interpreted in any way right now.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-2-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to get uprobe_link details through bpf_link_info
interface.
Adding new struct uprobe_multi to struct bpf_link_info to carry
the uprobe_multi link details.
The uprobe_multi.count is passed from user space to denote size
of array fields (offsets/ref_ctr_offsets/cookies). The actual
array size is stored back to uprobe_multi.count (allowing user
to find out the actual array size) and array fields are populated
up to the user passed size.
All the non-array fields (path/count/flags/pid) are always set.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231125193130.834322-4-jolsa@kernel.org
Add simple sanity checks that validate well-formed ranges (min <= max)
across u64, s64, u32, and s32 ranges. Also for cases when the value is
constant (either 64-bit or 32-bit), we validate that ranges and tnums
are in agreement.
These bounds checks are performed at the end of BPF_ALU/BPF_ALU64
operations, on conditional jumps, and for LDX instructions (where subreg
zero/sign extension is probably the most important to check). This
covers most of the interesting cases.
Also, we validate the sanity of the return register when manually
adjusting it for some special helpers.
By default, sanity violation will trigger a warning in verifier log and
resetting register bounds to "unbounded" ones. But to aid development
and debugging, BPF_F_TEST_SANITY_STRICT flag is added, which will
trigger hard failure of verification with -EFAULT on register bounds
violations. This allows selftests to catch such issues. veristat will
also gain a CLI option to enable this behavior.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231112010609.848406-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently get_perf_callchain only supports user stack walking for
the current task. Passing the correct *crosstask* param will return
0 frames if the task passed to __bpf_get_stack isn't the current
one instead of a single incorrect frame/address. This change
passes the correct *crosstask* param but also does a preemptive
check in __bpf_get_stack if the task is current and returns
-EOPNOTSUPP if it is not.
This issue was found using bpf_get_task_stack inside a BPF
iterator ("iter/task"), which iterates over all tasks.
bpf_get_task_stack works fine for fetching kernel stacks
but because get_perf_callchain relies on the caller to know
if the requested *task* is the current one (via *crosstask*)
it was failing in a confusing way.
It might be possible to get user stacks for all tasks utilizing
something like access_process_vm but that requires the bpf
program calling bpf_get_task_stack to be sleepable and would
therefore be a breaking change.
Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Jordan Rome <jordalgo@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com
Martin and Vadim reported a verifier failure with bpf_dynptr usage.
The issue is mentioned but Vadim workarounded the issue with source
change ([1]). The below describes what is the issue and why there
is a verification failure.
int BPF_PROG(skb_crypto_setup) {
struct bpf_dynptr algo, key;
...
bpf_dynptr_from_mem(..., ..., 0, &algo);
...
}
The bpf program is using vmlinux.h, so we have the following definition in
vmlinux.h:
struct bpf_dynptr {
long: 64;
long: 64;
};
Note that in uapi header bpf.h, we have
struct bpf_dynptr {
long: 64;
long: 64;
} __attribute__((aligned(8)));
So we lost alignment information for struct bpf_dynptr by using vmlinux.h.
Let us take a look at a simple program below:
$ cat align.c
typedef unsigned long long __u64;
struct bpf_dynptr_no_align {
__u64 :64;
__u64 :64;
};
struct bpf_dynptr_yes_align {
__u64 :64;
__u64 :64;
} __attribute__((aligned(8)));
void bar(void *, void *);
int foo() {
struct bpf_dynptr_no_align a;
struct bpf_dynptr_yes_align b;
bar(&a, &b);
return 0;
}
$ clang --target=bpf -O2 -S -emit-llvm align.c
Look at the generated IR file align.ll:
...
%a = alloca %struct.bpf_dynptr_no_align, align 1
%b = alloca %struct.bpf_dynptr_yes_align, align 8
...
The compiler dictates the alignment for struct bpf_dynptr_no_align is 1 and
the alignment for struct bpf_dynptr_yes_align is 8. So theoretically compiler
could allocate variable %a with alignment 1 although in reallity the compiler
may choose a different alignment by considering other local variables.
In [1], the verification failure happens because variable 'algo' is allocated
on the stack with alignment 4 (fp-28). But the verifer wants its alignment
to be 8.
To fix the issue, the RFC patch ([1]) tried to add '__attribute__((aligned(8)))'
to struct bpf_dynptr plus other similar structs. Andrii suggested that
we could directly modify uapi struct with named fields like struct 'bpf_iter_num':
struct bpf_iter_num {
/* opaque iterator state; having __u64 here allows to preserve correct
* alignment requirements in vmlinux.h, generated from BTF
*/
__u64 __opaque[1];
} __attribute__((aligned(8)));
Indeed, adding named fields for those affected structs in this patch can preserve
alignment when bpf program references them in vmlinux.h. With this patch,
the verification failure in [1] can also be resolved.
[1] https://lore.kernel.org/bpf/1b100f73-7625-4c1f-3ae5-50ecf84d3ff0@linux.dev/
[2] https://lore.kernel.org/bpf/20231103055218.2395034-1-yonghong.song@linux.dev/
Cc: Vadim Fedorenko <vadfed@meta.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231104024900.1539182-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.
One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).
In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.
Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f235d ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.
Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.
An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/20231024214904.29825-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
These hooks allows intercepting connect(), getsockname(),
getpeername(), sendmsg() and recvmsg() for unix sockets. The unix
socket hooks get write access to the address length because the
address length is not fixed when dealing with unix sockets and
needs to be modified when a unix socket address is modified by
the hook. Because abstract socket unix addresses start with a
NUL byte, we cannot recalculate the socket address in kernelspace
after running the hook by calculating the length of the unix socket
path using strlen().
These hooks can be used when users want to multiplex syscall to a
single unix socket to multiple different processes behind the scenes
by redirecting the connect() and other syscalls to process specific
sockets.
We do not implement support for intercepting bind() because when
using bind() with unix sockets with a pathname address, this creates
an inode in the filesystem which must be cleaned up. If we rewrite
the address, the user might try to clean up the wrong file, leaking
the socket in the filesystem where it is never cleaned up. Until we
figure out a solution for this (and a use case for intercepting bind()),
we opt to not allow rewriting the sockaddr in bind() calls.
We also implement recvmsg() support for connected streams so that
after a connect() that is modified by a sockaddr hook, any corresponding
recmvsg() on the connected socket can also be modified to make the
connected program think it is connected to the "intended" remote.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-5-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
BPF supports creating high resolution timers using bpf_timer_* helper
functions. Currently, only the BPF_F_TIMER_ABS flag is supported, which
specifies that the timeout should be interpreted as absolute time. It
would also be useful to be able to pin that timer to a core. For
example, if you wanted to make a subset of cores run without timer
interrupts, and only have the timer be invoked on a single core.
This patch adds support for this with a new BPF_F_TIMER_CPU_PIN flag.
When specified, the HRTIMER_MODE_PINNED flag is passed to
hrtimer_start(). A subsequent patch will update selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20231004162339.200702-2-void@manifault.com
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Add new xdp-rx-metadata-features member to netdev netlink
which exports a bitmask of supported kfuncs. Most of the patch
is autogenerated (headers), the only relevant part is netdev.yaml
and the changes in netdev-genl.c to marshal into netlink.
Example output on veth:
$ ip link add veth0 type veth peer name veth1 # ifndex == 12
$ ./tools/net/ynl/samples/netdev 12
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 12
veth1[12] xdp-features (23): basic redirect rx-sg xdp-rx-metadata-features (3): timestamp hash xdp-zc-max-segs=0
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr'
can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality
and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated.
Also make changes in selftests/bpf/test_bpftool_synctypes.py
and selftest libbpf_str to fix otherwise test errors.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152837.2003563-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to specify pid for uprobe_multi link and the uprobes
are created only for task with given pid value.
Using the consumer.filter filter callback for that, so the task gets
filtered during the uprobe installation.
We still need to check the task during runtime in the uprobe handler,
because the handler could get executed if there's another system
wide consumer on the same uprobe (thanks Oleg for the insight).
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to specify cookies array for uprobe_multi link.
The cookies array share indexes and length with other uprobe_multi
arrays (offsets/ref_ctr_offsets).
The cookies[i] value defines cookie for i-the uprobe and will be
returned by bpf_get_attach_cookie helper when called from ebpf
program hooked to that specific uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new multi uprobe link that allows to attach bpf program
to multiple uprobes.
Uprobes to attach are specified via new link_create uprobe_multi
union:
struct {
__aligned_u64 path;
__aligned_u64 offsets;
__aligned_u64 ref_ctr_offsets;
__u32 cnt;
__u32 flags;
} uprobe_multi;
Uprobes are defined for single binary specified in path and multiple
calling sites specified in offsets array with optional reference
counters specified in ref_ctr_offsets array. All specified arrays
have length of 'cnt'.
The 'flags' supports single bit for now that marks the uprobe as
return probe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support for bpf_get_func_ip helper for uprobe program to return
probed address for both uprobe and return uprobe.
We discussed this in [1] and agreed that uprobe can have special use
of bpf_get_func_ip helper that differs from kprobe.
The kprobe bpf_get_func_ip returns:
- address of the function if probe is attach on function entry
for both kprobe and return kprobe
- 0 if the probe is not attach on function entry
The uprobe bpf_get_func_ip returns:
- address of the probe for both uprobe and return uprobe
The reason for this semantic change is that kernel can't really tell
if the probe user space address is function entry.
The uprobe program is actually kprobe type program attached as uprobe.
One of the consequences of this design is that uprobes do not have its
own set of helpers, but share them with kprobes.
As we need different functionality for bpf_get_func_ip helper for uprobe,
I'm adding the bool value to the bpf_trace_run_ctx, so the helper can
detect that it's executed in uprobe context and call specific code.
The is_uprobe bool is set as true in bpf_prog_run_array_sleepable, which
is currently used only for executing bpf programs in uprobe.
Renaming bpf_prog_run_array_sleepable to bpf_prog_run_array_uprobe
to address that it's only used for uprobes and that it sets the
run_ctx.is_uprobe as suggested by Yafang Shao.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
[1] https://lore.kernel.org/bpf/CAEf4BzZ=xLVkG5eurEuvLU79wAMtwho7ReR+XJAgwhFF4M-7Cg@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-2-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This commit adds support for enabling IP defrag using pre-existing
netfilter defrag support. Basically all the flag does is bump a refcnt
while the link the active. Checks are also added to ensure the prog
requesting defrag support is run _after_ netfilter defrag hooks.
We also take care to avoid any issues w.r.t. module unloading -- while
defrag is active on a link, the module is prevented from unloading.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/5cff26f97e55161b7d56b09ddcf5f8888a5add1d.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add interpreter/jit support for new sign-extension load insns
which adds a new mode (BPF_MEMSX).
Also add verifier support to recognize these insns and to
do proper verification with new insns. In verifier, besides
to deduce proper bounds for the dst_reg, probed memory access
is also properly handled.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011156.3711870-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT
sockets. This means we can't use the helper to steer traffic to Envoy,
which configures SO_REUSEPORT on its sockets. In turn, we're blocked
from removing TPROXY from our setup.
The reason that bpf_sk_assign refuses such sockets is that the
bpf_sk_lookup helpers don't execute SK_REUSEPORT programs. Instead,
one of the reuseport sockets is selected by hash. This could cause
dispatch to the "wrong" socket:
sk = bpf_sk_lookup_tcp(...) // select SO_REUSEPORT by hash
bpf_sk_assign(skb, sk) // SK_REUSEPORT wasn't executed
Fixing this isn't as simple as invoking SK_REUSEPORT from the lookup
helpers unfortunately. In the tc context, L2 headers are at the start
of the skb, while SK_REUSEPORT expects L3 headers instead.
Instead, we execute the SK_REUSEPORT program when the assigned socket
is pulled out of the skb, further up the stack. This creates some
trickiness with regards to refcounting as bpf_sk_assign will put both
refcounted and RCU freed sockets in skb->sk. reuseport sockets are RCU
freed. We can infer that the sk_assigned socket is RCU freed if the
reuseport lookup succeeds, but convincing yourself of this fact isn't
straight forward. Therefore we defensively check refcounting on the
sk_assign sock even though it's probably not required in practice.
Fixes: 8e368dc72e86 ("bpf: Fix use of sk->sk_reuseport from sk_assign")
Fixes: cf7fbe660f2d ("bpf: Add socket assign support")
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Stringer <joe@cilium.io>
Link: https://lore.kernel.org/bpf/CACAyw98+qycmpQzKupquhkxbvWK4OFyDuuLMBNROnfWMZxUWeA@mail.gmail.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-7-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Seeing the following:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
...so sync tools version missing some list_node/rb_tree fields.
Fixes: c3c510ce431c ("bpf: Add 'owner' field to bpf_{list,rb}_node")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20230719162257.20818-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work refactors and adds a lightweight extension ("tcx") to the tc BPF
ingress and egress data path side for allowing BPF program management based
on fds via bpf() syscall through the newly added generic multi-prog API.
The main goal behind this work which we also presented at LPC [0] last year
and a recent update at LSF/MM/BPF this year [3] is to support long-awaited
BPF link functionality for tc BPF programs, which allows for a model of safe
ownership and program detachment.
Given the rise in tc BPF users in cloud native environments, this becomes
necessary to avoid hard to debug incidents either through stale leftover
programs or 3rd party applications accidentally stepping on each others toes.
As a recap, a BPF link represents the attachment of a BPF program to a BPF
hook point. The BPF link holds a single reference to keep BPF program alive.
Moreover, hook points do not reference a BPF link, only the application's
fd or pinning does. A BPF link holds meta-data specific to attachment and
implements operations for link creation, (atomic) BPF program update,
detachment and introspection. The motivation for BPF links for tc BPF programs
is multi-fold, for example:
- From Meta: "It's especially important for applications that are deployed
fleet-wide and that don't "control" hosts they are deployed to. If such
application crashes and no one notices and does anything about that, BPF
program will keep running draining resources or even just, say, dropping
packets. We at FB had outages due to such permanent BPF attachment
semantics. With fd-based BPF link we are getting a framework, which allows
safe, auto-detachable behavior by default, unless application explicitly
opts in by pinning the BPF link." [1]
- From Cilium-side the tc BPF programs we attach to host-facing veth devices
and phys devices build the core datapath for Kubernetes Pods, and they
implement forwarding, load-balancing, policy, EDT-management, etc, within
BPF. Currently there is no concept of 'safe' ownership, e.g. we've recently
experienced hard-to-debug issues in a user's staging environment where
another Kubernetes application using tc BPF attached to the same prio/handle
of cls_bpf, accidentally wiping all Cilium-based BPF programs from underneath
it. The goal is to establish a clear/safe ownership model via links which
cannot accidentally be overridden. [0,2]
BPF links for tc can co-exist with non-link attachments, and the semantics are
in line also with XDP links: BPF links cannot replace other BPF links, BPF
links cannot replace non-BPF links, non-BPF links cannot replace BPF links and
lastly only non-BPF links can replace non-BPF links. In case of Cilium, this
would solve mentioned issue of safe ownership model as 3rd party applications
would not be able to accidentally wipe Cilium programs, even if they are not
BPF link aware.
Earlier attempts [4] have tried to integrate BPF links into core tc machinery
to solve cls_bpf, which has been intrusive to the generic tc kernel API with
extensions only specific to cls_bpf and suboptimal/complex since cls_bpf could
be wiped from the qdisc also. Locking a tc BPF program in place this way, is
getting into layering hacks given the two object models are vastly different.
We instead implemented the tcx (tc 'express') layer which is an fd-based tc BPF
attach API, so that the BPF link implementation blends in naturally similar to
other link types which are fd-based and without the need for changing core tc
internal APIs. BPF programs for tc can then be successively migrated from classic
cls_bpf to the new tc BPF link without needing to change the program's source
code, just the BPF loader mechanics for attaching is sufficient.
For the current tc framework, there is no change in behavior with this change
and neither does this change touch on tc core kernel APIs. The gist of this
patch is that the ingress and egress hook have a lightweight, qdisc-less
extension for BPF to attach its tc BPF programs, in other words, a minimal
entry point for tc BPF. The name tcx has been suggested from discussion of
earlier revisions of this work as a good fit, and to more easily differ between
the classic cls_bpf attachment and the fd-based one.
For the ingress and egress tcx points, the device holds a cache-friendly array
with program pointers which is separated from control plane (slow-path) data.
Earlier versions of this work used priority to determine ordering and expression
of dependencies similar as with classic tc, but it was challenged that for
something more future-proof a better user experience is required. Hence this
resulted in the design and development of the generic attach/detach/query API
for multi-progs. See prior patch with its discussion on the API design. tcx is
the first user and later we plan to integrate also others, for example, one
candidate is multi-prog support for XDP which would benefit and have the same
'look and feel' from API perspective.
The goal with tcx is to have maximum compatibility to existing tc BPF programs,
so they don't need to be rewritten specifically. Compatibility to call into
classic tcf_classify() is also provided in order to allow successive migration
or both to cleanly co-exist where needed given its all one logical tc layer and
the tcx plus classic tc cls/act build one logical overall processing pipeline.
tcx supports the simplified return codes TCX_NEXT which is non-terminating (go
to next program) and terminating ones with TCX_PASS, TCX_DROP, TCX_REDIRECT.
The fd-based API is behind a static key, so that when unused the code is also
not entered. The struct tcx_entry's program array is currently static, but
could be made dynamic if necessary at a point in future. The a/b pair swap
design has been chosen so that for detachment there are no allocations which
otherwise could fail.
The work has been tested with tc-testing selftest suite which all passes, as
well as the tc BPF tests from the BPF CI, and also with Cilium's L4LB.
Thanks also to Nikolay Aleksandrov and Martin Lau for in-depth early reviews
of this work.
[0] https://lpc.events/event/16/contributions/1353/
[1] https://lore.kernel.org/bpf/CAEf4BzbokCJN33Nw_kg82sO=xppXnKWEncGTWCTB9vGCmLB6pw@mail.gmail.com
[2] https://colocatedeventseu2023.sched.com/event/1Jo6O/tales-from-an-ebpf-programs-murder-mystery-hemanth-malla-guillaume-fournier-datadog
[3] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
[4] https://lore.kernel.org/bpf/20210604063116.234316-1-memxor@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds a generic layer called bpf_mprog which can be reused by different
attachment layers to enable multi-program attachment and dependency resolution.
In-kernel users of the bpf_mprog don't need to care about the dependency
resolution internals, they can just consume it with few API calls.
The initial idea of having a generic API sparked out of discussion [0] from an
earlier revision of this work where tc's priority was reused and exposed via
BPF uapi as a way to coordinate dependencies among tc BPF programs, similar
as-is for classic tc BPF. The feedback was that priority provides a bad user
experience and is hard to use [1], e.g.:
I cannot help but feel that priority logic copy-paste from old tc, netfilter
and friends is done because "that's how things were done in the past". [...]
Priority gets exposed everywhere in uapi all the way to bpftool when it's
right there for users to understand. And that's the main problem with it.
The user don't want to and don't need to be aware of it, but uapi forces them
to pick the priority. [...] Your cover letter [0] example proves that in
real life different service pick the same priority. They simply don't know
any better. Priority is an unnecessary magic that apps _have_ to pick, so
they just copy-paste and everyone ends up using the same.
The course of the discussion showed more and more the need for a generic,
reusable API where the "same look and feel" can be applied for various other
program types beyond just tc BPF, for example XDP today does not have multi-
program support in kernel, but also there was interest around this API for
improving management of cgroup program types. Such common multi-program
management concept is useful for BPF management daemons or user space BPF
applications coordinating internally about their attachments.
Both from Cilium and Meta side [2], we've collected the following requirements
for a generic attach/detach/query API for multi-progs which has been implemented
as part of this work:
- Support prog-based attach/detach and link API
- Dependency directives (can also be combined):
- BPF_F_{BEFORE,AFTER} with relative_{fd,id} which can be {prog,link,none}
- BPF_F_ID flag as {fd,id} toggle; the rationale for id is so that user
space application does not need CAP_SYS_ADMIN to retrieve foreign fds
via bpf_*_get_fd_by_id()
- BPF_F_LINK flag as {prog,link} toggle
- If relative_{fd,id} is none, then BPF_F_BEFORE will just prepend, and
BPF_F_AFTER will just append for attaching
- Enforced only at attach time
- BPF_F_REPLACE with replace_bpf_fd which can be prog, links have their
own infra for replacing their internal prog
- If no flags are set, then it's default append behavior for attaching
- Internal revision counter and optionally being able to pass expected_revision
- User space application can query current state with revision, and pass it
along for attachment to assert current state before doing updates
- Query also gets extension for link_ids array and link_attach_flags:
- prog_ids are always filled with program IDs
- link_ids are filled with link IDs when link was used, otherwise 0
- {prog,link}_attach_flags for holding {prog,link}-specific flags
- Must be easy to integrate/reuse for in-kernel users
The uapi-side changes needed for supporting bpf_mprog are rather minimal,
consisting of the additions of the attachment flags, revision counter, and
expanding existing union with relative_{fd,id} member.
The bpf_mprog framework consists of an bpf_mprog_entry object which holds
an array of bpf_mprog_fp (fast-path structure). The bpf_mprog_cp (control-path
structure) is part of bpf_mprog_bundle. Both have been separated, so that
fast-path gets efficient packing of bpf_prog pointers for maximum cache
efficiency. Also, array has been chosen instead of linked list or other
structures to remove unnecessary indirections for a fast point-to-entry in
tc for BPF.
The bpf_mprog_entry comes as a pair via bpf_mprog_bundle so that in case of
updates the peer bpf_mprog_entry is populated and then just swapped which
avoids additional allocations that could otherwise fail, for example, in
detach case. bpf_mprog_{fp,cp} arrays are currently static, but they could
be converted to dynamic allocation if necessary at a point in future.
Locking is deferred to the in-kernel user of bpf_mprog, for example, in case
of tcx which uses this API in the next patch, it piggybacks on rtnl.
An extensive test suite for checking all aspects of this API for prog-based
attach/detach and link API comes as BPF selftests in this series.
Thanks also to Andrii Nakryiko for early API discussions wrt Meta's BPF prog
management.
[0] https://lore.kernel.org/bpf/20221004231143.19190-1-daniel@iogearbox.net
[1] https://lore.kernel.org/bpf/CAADnVQ+gEY3FjCR=+DmjDR4gp5bOYZUFJQXj4agKFHT9CQPZBw@mail.gmail.com
[2] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230719140858.13224-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the first basic multi-buffer test that sends a stream of 9K
packets and validates that they are received at the other end. In
order to enable sending and receiving multi-buffer packets, code that
sets the MTU is introduced as well as modifications to the XDP
programs so that they signal that they are multi-buffer enabled.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-20-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
