LoongArch uses the generic syscall table, where __NR_bpf is defined
as 280 in include/uapi/asm-generic/unistd.h.
To align with other architectures, add the __NR_bpf definition for
LoongArch to avoid a potential compilation failure: "error __NR_bpf
not defined. libbpf does not support your arch."
This is a follow up patch of:
commit b0c47807d31d ("bpf: Add sparc support to tools and samples.")
commit bad1926dd2f6 ("bpf, s390: fix build for libbpf and selftest suite")
commit ca31ca8247e2 ("tools/bpf: fix perf build error with uClibc (seen on ARC)")
commit e32cb12ff52a ("bpf, mips: Fix build errors about __NR_bpf undeclared")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260526063936.16769-1-yangtiezhu@loongson.cn
There should be an OPTS_VALID() check for log_opts before extracting its
fields.
If no such OPTS_VALID() check and an application compiled against a future
libbpf header passes a log_opts with new, non-zero fields to libbpf.so,
those fields will be ignored silently.
Fixes: 702259006f93 ("libbpf: Add syscall common attributes support for map_create")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260518145446.6794-4-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the previous commit adding common attribute support for
BPF_MAP_CREATE, users can now retrieve detailed error messages when map
creation fails via the log_buf field.
Introduce struct bpf_log_opts with the following fields:
log_buf, log_size, log_level, and log_true_size.
Extend bpf_map_create_opts with a new field log_opts, allowing users to
capture and inspect log messages on map creation failures.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-8-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To support the extended BPF syscall introduced in the previous commit,
introduce the following internal APIs:
* 'sys_bpf_ext()'
* 'sys_bpf_ext_fd()'
They wrap the raw 'syscall()' interface to support passing extended
attributes.
* 'probe_sys_bpf_ext()'
Check whether current kernel supports the BPF syscall common attributes.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch extends the BPF_PROG_LOAD command by adding three new fields
to `union bpf_attr` in the user-space API:
- signature: A pointer to the signature blob.
- signature_size: The size of the signature blob.
- keyring_id: The serial number of a loaded kernel keyring (e.g.,
the user or session keyring) containing the trusted public keys.
When a BPF program is loaded with a signature, the kernel:
1. Retrieves the trusted keyring using the provided `keyring_id`.
2. Verifies the supplied signature against the BPF program's
instruction buffer.
3. If the signature is valid and was generated by a key in the trusted
keyring, the program load proceeds.
4. If no signature is provided, the load proceeds as before, allowing
for backward compatibility. LSMs can chose to restrict unsigned
programs and implement a security policy.
5. If signature verification fails for any reason,
the program is not loaded.
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250921160120.9711-2-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently libbpf supports bpf_program__attach_cgroup() with signature:
LIBBPF_API struct bpf_link *
bpf_program__attach_cgroup(const struct bpf_program *prog, int cgroup_fd);
To support mprog style attachment, additionsl fields like flags,
relative_{fd,id} and expected_revision are needed.
Add a new API:
LIBBPF_API struct bpf_link *
bpf_program__attach_cgroup_opts(const struct bpf_program *prog, int cgroup_fd,
const struct bpf_cgroup_opts *opts);
where bpf_cgroup_opts contains all above needed fields.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163146.2429212-1-yonghong.song@linux.dev
Adding support to attach program in uprobe session mode
with bpf_program__attach_uprobe_multi function.
Adding session bool to bpf_uprobe_multi_opts struct that allows
to load and attach the bpf program via uprobe session.
the attachment to create uprobe multi session.
Also adding new program loader section that allows:
SEC("uprobe.session/bpf_fentry_test*")
and loads/attaches uprobe program as uprobe session.
Adding sleepable hook (uprobe.session.s) as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-6-jolsa@kernel.org
Adjust `union bpf_attr` size passed to kernel in two feature-detecting
functions to take into account prog_token_fd field.
Libbpf is avoiding memset()'ing entire `union bpf_attr` by only using
minimal set of bpf_attr's fields. Two places have been missed when
wiring BPF token support in libbpf's feature detection logic.
Fix them trivially.
Fixes: f3dcee938f48 ("libbpf: Wire up token_fd into feature probing logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240513180804.403775-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to attach program in kprobe session mode
with bpf_program__attach_kprobe_multi_opts function.
Adding session bool to bpf_kprobe_multi_opts struct that allows
to load and attach the bpf program via kprobe session.
the attachment to create kprobe multi session.
Also adding new program loader section that allows:
SEC("kprobe.session/bpf_fentry_test*")
and loads/attaches kprobe program as kprobe session.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-5-jolsa@kernel.org
Adjust feature probing callbacks to take into account optional token_fd.
In unprivileged contexts, some feature detectors would fail to detect
kernel support just because BPF program, BPF map, or BTF object can't be
loaded due to privileged nature of those operations. So when BPF object
is loaded with BPF token, this token should be used for feature probing.
This patch is setting support for this scenario, but we don't yet pass
non-zero token FD. This will be added in the next patch.
We also switched BPF cookie detector from using kprobe program to
tracepoint one, as tracepoint is somewhat less dangerous BPF program
type and has higher likelihood of being allowed through BPF token in the
future. This change has no effect on detection behavior.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-25-andrii@kernel.org
Add feat_supported() helper that accepts feature cache instead of
bpf_object. This allows low-level code in bpf.c to not know or care
about higher-level concept of bpf_object, yet it will be able to utilize
custom feature checking in cases where BPF token might influence the
outcome.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-23-andrii@kernel.org
Allow user to specify token_fd for bpf_btf_load() API that wraps
kernel's BPF_BTF_LOAD command. This allows loading BTF from unprivileged
process as long as it has BPF token allowing BPF_BTF_LOAD command, which
can be created and delegated by privileged process.
Wire through new btf_flags as well, so that user can provide
BPF_F_TOKEN_FD flag, if necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-15-andrii@kernel.org
The commit 9e926acda0c2 ("libbpf: Find correct module BTFs for struct_ops maps and progs.")
sets a newly added field (value_type_btf_obj_fd) to -1 in libbpf when
the caller of the libbpf's bpf_map_create did not define this field by
passing a NULL "opts" or passing in a "opts" that does not cover this
new field. OPT_HAS(opts, field) is used to decide if the field is
defined or not:
((opts) && opts->sz >= offsetofend(typeof(*(opts)), field))
Once OPTS_HAS decided the field is not defined, that field should
be set to 0. For this particular new field (value_type_btf_obj_fd),
its corresponding map_flags "BPF_F_VTYPE_BTF_OBJ_FD" is not set.
Thus, the kernel does not treat it as an fd field.
Fixes: 9e926acda0c2 ("libbpf: Find correct module BTFs for struct_ops maps and progs.")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240124224418.2905133-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Locate the module BTFs for struct_ops maps and progs and pass them to the
kernel. This ensures that the kernel correctly resolves type IDs from the
appropriate module BTFs.
For the map of a struct_ops object, the FD of the module BTF is set to
bpf_map to keep a reference to the module BTF. The FD is passed to the
kernel as value_type_btf_obj_fd when the struct_ops object is loaded.
For a bpf_struct_ops prog, attach_btf_obj_fd of bpf_prog is the FD of a
module BTF in the kernel.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240119225005.668602-13-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Adjust feature probing callbacks to take into account optional token_fd.
In unprivileged contexts, some feature detectors would fail to detect
kernel support just because BPF program, BPF map, or BTF object can't be
loaded due to privileged nature of those operations. So when BPF object
is loaded with BPF token, this token should be used for feature probing.
This patch is setting support for this scenario, but we don't yet pass
non-zero token FD. This will be added in the next patch.
We also switched BPF cookie detector from using kprobe program to
tracepoint one, as tracepoint is somewhat less dangerous BPF program
type and has higher likelihood of being allowed through BPF token in the
future. This change has no effect on detection behavior.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add feat_supported() helper that accepts feature cache instead of
bpf_object. This allows low-level code in bpf.c to not know or care
about higher-level concept of bpf_object, yet it will be able to utilize
custom feature checking in cases where BPF token might influence the
outcome.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow user to specify token_fd for bpf_btf_load() API that wraps
kernel's BPF_BTF_LOAD command. This allows loading BTF from unprivileged
process as long as it has BPF token allowing BPF_BTF_LOAD command, which
can be created and delegated by privileged process.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-15-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds bpf_program__attach_netkit() API to libbpf. Overall it is very
similar to tcx. The API looks as following:
LIBBPF_API struct bpf_link *
bpf_program__attach_netkit(const struct bpf_program *prog, int ifindex,
const struct bpf_netkit_opts *opts);
The struct bpf_netkit_opts is done in similar way as struct bpf_tcx_opts
for supporting bpf_mprog control parameters. The attach location for the
primary and peer device is derived from the program section "netkit/primary"
and "netkit/peer", respectively.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Implement tcx BPF link support for libbpf.
The bpf_program__attach_fd() API has been refactored slightly in order to pass
bpf_link_create_opts pointer as input.
A new bpf_program__attach_tcx() has been added on top of this which allows for
passing all relevant data via extensible struct bpf_tcx_opts.
The program sections tcx/ingress and tcx/egress correspond to the hook locations
for tc ingress and egress, respectively.
For concrete usage examples, see the extensive selftests that have been
developed as part of this series.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-5-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend libbpf attach opts and add a new detach opts API so this can be used
to add/remove fd-based tcx BPF programs. The old-style bpf_prog_detach() and
bpf_prog_detach2() APIs are refactored to reuse the new bpf_prog_detach_opts()
internally.
The bpf_prog_query_opts() API got extended to be able to handle the new
link_ids, link_attach_flags and revision fields.
For concrete usage examples, see the extensive selftests that have been
developed as part of this series.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add output-only log_true_size field to bpf_prog_load_opts to return
bpf_attr->log_true_size value back from bpf() syscall.
Note, that we have to drop const modifier from opts in bpf_prog_load().
This could potentially cause compilation error for some users. But
the usual practice is to define bpf_prog_load_ops
as a local variable next to bpf_prog_load() call and pass pointer to it,
so const vs non-const makes no difference and won't even come up in most
(if not all) cases.
There are no runtime and ABI backwards/forward compatibility issues at all.
If user provides old struct bpf_prog_load_opts, libbpf won't set new
fields. If old libbpf is provided new bpf_prog_load_opts, nothing will
happen either as old libbpf doesn't yet know about this new field.
Adding a new variant of bpf_prog_load() just for this seems like a big
and unnecessary overkill. As a corroborating evidence is the fact that
entire selftests/bpf code base required not adjustment whatsoever.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230406234205.323208-16-andrii@kernel.org
Introduce bpf_link_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_link_get_fd_by_id(), and call bpf_link_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_link_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-6-roberto.sassu@huaweicloud.com
Introduce bpf_btf_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_btf_get_fd_by_id(), and call bpf_btf_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_btf_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-5-roberto.sassu@huaweicloud.com
Introduce bpf_prog_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_prog_get_fd_by_id(), and call bpf_prog_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_prog_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-4-roberto.sassu@huaweicloud.com
Define a new data structure called bpf_get_fd_by_id_opts, with the member
open_flags, to be used by callers of the _opts variants of
bpf_*_get_fd_by_id() to specify the permissions needed for the file
descriptor to be obtained.
Also, introduce bpf_map_get_fd_by_id_opts(), to let the caller pass a
bpf_get_fd_by_id_opts structure.
Finally, keep the existing bpf_map_get_fd_by_id(), and call
bpf_map_get_fd_by_id_opts() with NULL as opts argument, to request
read-write permissions (current behavior).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-3-roberto.sassu@huaweicloud.com
Jiri Olsa
Tiezhu Yang
Leon Hwang
Menglong Dong
Amery Hung
Jianyun Gao
KP Singh
Kumar Kartikeya Dwivedi
Yonghong Song
Mykyta Yatsenko
Anton Protopopov
Andrii Nakryiko
Martin KaFai Lau
Kui-Feng Lee
Daniel Borkmann
Florian Westphal
Kui-Feng Lee
Ilya Leoshkevich
Roberto Sassu