If bits is 0, the case when the map is empty, then the >> is the size of
the register which is undefined behavior - on x86 it is the same as a
shift by 0.
Fix by handling the 0 case explicitly and guarding calls to hash_bits for
empty maps in hashmap__for_each_key_entry and hashmap__for_each_entry_safe.
Fixes: e3b924224028 ("libbpf: add resizable non-thread safe internal hashmap")
Suggested-by: Andrii Nakryiko <andriin@fb.com>,
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201029223707.494059-1-irogers@google.com
In some cases compiler seems to generate distinct DWARF types for identical
arrays within the same CU. That seems like a bug, but it's already out there
and breaks type graph equivalence checks, so accommodate it anyway by checking
for identical arrays, regardless of their type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-10-andrii@kernel.org
Add support for deduplication split BTFs. When deduplicating split BTF, base
BTF is considered to be immutable and can't be modified or adjusted. 99% of
BTF deduplication logic is left intact (module some type numbering adjustments).
There are only two differences.
First, each type in base BTF gets hashed (expect VAR and DATASEC, of course,
those are always considered to be self-canonical instances) and added into
a table of canonical table candidates. Hashing is a shallow, fast operation,
so mostly eliminates the overhead of having entire base BTF to be a part of
BTF dedup.
Second difference is very critical and subtle. While deduplicating split BTF
types, it is possible to discover that one of immutable base BTF BTF_KIND_FWD
types can and should be resolved to a full STRUCT/UNION type from the split
BTF part. This is, obviously, can't happen because we can't modify the base
BTF types anymore. So because of that, any type in split BTF that directly or
indirectly references that newly-to-be-resolved FWD type can't be considered
to be equivalent to the corresponding canonical types in base BTF, because
that would result in a loss of type resolution information. So in such case,
split BTF types will be deduplicated separately and will cause some
duplication of type information, which is unavoidable.
With those two changes, the rest of the algorithm manages to deduplicate split
BTF correctly, pointing all the duplicates to their canonical counter-parts in
base BTF, but also is deduplicating whatever unique types are present in split
BTF on their own.
Also, theoretically, split BTF after deduplication could end up with either
empty type section or empty string section. This is handled by libbpf
correctly in one of previous patches in the series.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-9-andrii@kernel.org
Make data section layout checks stricter, disallowing overlap of types and
strings data.
Additionally, allow BTFs with no type data. There is nothing inherently wrong
with having BTF with no types (put potentially with some strings). This could
be a situation with kernel module BTFs, if module doesn't introduce any new
type information.
Also fix invalid offset alignment check for btf->hdr->type_off.
Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-8-andrii@kernel.org
Support split BTF operation, in which one BTF (base BTF) provides basic set of
types and strings, while another one (split BTF) builds on top of base's types
and strings and adds its own new types and strings. From API standpoint, the
fact that the split BTF is built on top of the base BTF is transparent.
Type numeration is transparent. If the base BTF had last type ID #N, then all
types in the split BTF start at type ID N+1. Any type in split BTF can
reference base BTF types, but not vice versa. Programmatically construction of
a split BTF on top of a base BTF is supported: one can create an empty split
BTF with btf__new_empty_split() and pass base BTF as an input, or pass raw
binary data to btf__new_split(), or use btf__parse_xxx_split() variants to get
initial set of split types/strings from the ELF file with .BTF section.
String offsets are similarly transparent and are a logical continuation of
base BTF's strings. When building BTF programmatically and adding a new string
(explicitly with btf__add_str() or implicitly through appending new
types/members), string-to-be-added would first be looked up from the base
BTF's string section and re-used if it's there. If not, it will be looked up
and/or added to the split BTF string section. Similarly to type IDs, types in
split BTF can refer to strings from base BTF absolutely transparently (but not
vice versa, of course, because base BTF doesn't "know" about existence of
split BTF).
Internal type index is slightly adjusted to be zero-indexed, ignoring a fake
[0] VOID type. This allows to handle split/base BTF type lookups transparently
by using btf->start_id type ID offset, which is always 1 for base/non-split
BTF and equals btf__get_nr_types(base_btf) + 1 for the split BTF.
BTF deduplication is not yet supported for split BTF and support for it will
be added in separate patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-5-andrii@kernel.org
Revamp BTF dedup's string deduplication to match the approach of writable BTF
string management. This allows to transfer deduplicated strings index back to
BTF object after deduplication without expensive extra memory copying and hash
map re-construction. It also simplifies the code and speeds it up, because
hashmap-based string deduplication is faster than sort + unique approach.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-4-andrii@kernel.org
This avoids compilation warning if `struct bpf_redir_neigh` is not provided by
other kernel headers.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Yaniv reported a compilation error after pulling latest libbpf:
[...]
../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error:
unknown register name 'r0' in asm
: "r0", "r1", "r2", "r3", "r4", "r5");
[...]
The issue got triggered given Yaniv was compiling tracing programs with native
target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor
CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR
to BPF object file. Given that clang was expecting x86 inline asm and not BPF
one the error complained that these regs don't exist on the former.
Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid
to use. BPF tracing programs on more modern kernels use BPF target anyway and
thus the bpf_tail_call_static() function will be available for them. BPF inline
asm is supported since clang 7 (clang <= 6 otherwise throws same above error),
and __bpf_unreachable() since clang 8, therefore include the latter condition
in order to prevent compilation errors for older clang versions. Given even an
old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did
not bother to special case the __bpf_unreachable() inside bpf_tail_call_static()
further.
Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they
still have the old hacky way to even compile networking progs with native instead
of BPF target so bpf_tail_call_static() won't be defined there anymore.
Fixes: 0e9f6841f664 ("bpf, libbpf: Add bpf_tail_call_static helper for bpf programs")
Reported-by: Yaniv Agman <yanivagman@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Tested-by: Yaniv Agman <yanivagman@gmail.com>
Link: https://lore.kernel.org/bpf/CAMy7=ZUk08w5Gc2Z-EKi4JFtuUCaZYmE4yzhJjrExXpYKR4L8w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20201021203257.26223-1-daniel@iogearbox.net
Add support for patching instructions of the following form:
- rX = *(T *)(rY + <off>);
- *(T *)(rX + <off>) = rY;
- *(T *)(rX + <off>) = <imm>, where T is one of {u8, u16, u32, u64}.
For such instructions, if the actual kernel field recorded in CO-RE relocation
has a different size than the one recorded locally (e.g., from vmlinux.h),
then libbpf will adjust T to an appropriate 1-, 2-, 4-, or 8-byte loads.
In general, such transformation is not always correct and could lead to
invalid final value being loaded or stored. But two classes of cases are
always safe:
- if both local and target (kernel) types are unsigned integers, but of
different sizes, then it's OK to adjust load/store instruction according to
the necessary memory size. Zero-extending nature of such instructions and
unsignedness make sure that the final value is always correct;
- pointer size mismatch between BPF target architecture (which is always
64-bit) and 32-bit host kernel architecture can be similarly resolved
automatically, because pointer is essentially an unsigned integer. Loading
32-bit pointer into 64-bit BPF register with zero extension will leave
correct pointer in the register.
Both cases are necessary to support CO-RE on 32-bit kernels, as `unsigned
long` in vmlinux.h generated from 32-bit kernel is 32-bit, but when compiled
with BPF program for BPF target it will be treated by compiler as 64-bit
integer. Similarly, pointers in vmlinux.h are 32-bit for kernel, but treated
as 64-bit values by compiler for BPF target. Both problems are now resolved by
libbpf for direct memory reads.
But similar transformations are useful in general when kernel fields are
"resized" from, e.g., unsigned int to unsigned long (or vice versa).
Now, similar transformations for signed integers are not safe to perform as
they will result in incorrect sign extension of the value. If such situation
is detected, libbpf will emit helpful message and will poison the instruction.
Not failing immediately means that it's possible to guard the instruction
based on kernel version (or other conditions) and make sure it's not
reachable.
If there is a need to read signed integers that change sizes between different
kernels, it's possible to use BPF_CORE_READ_BITFIELD() macro, which works both
with bitfields and non-bitfield integers of any signedness and handles
sign-extension properly. Also, bpf_core_read() with proper size and/or use of
bpf_core_field_size() relocation could allow to deal with such complicated
situations explicitly, if not so conventiently as direct memory reads.
Selftests added in a separate patch in progs/test_core_autosize.c demonstrate
both direct memory and probed use cases.
BPF_CORE_READ() is not changed and it won't deal with such situations as
automatically as direct memory reads due to the signedness integer
limitations, which are much harder to detect and control with compiler macro
magic. So it's encouraged to utilize direct memory reads as much as possible.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-3-andrii@kernel.org
Bypass CO-RE relocations step for BPF programs that are not going to be
loaded. This allows to have BPF programs compiled in and disabled dynamically
if kernel is not supposed to provide enough relocation information. In such
case, there won't be unnecessary warnings about failed relocations.
Fixes: d929758101fc ("libbpf: Support disabling auto-loading BPF programs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-2-andrii@kernel.org
Fix a compatibility problem when the old XDP_SHARED_UMEM mode is used
together with the xsk_socket__create() call. In the old XDP_SHARED_UMEM
mode, only sharing of the same device and queue id was allowed, and
in this mode, the fill ring and completion ring were shared between
the AF_XDP sockets.
Therefore, it was perfectly fine to call the xsk_socket__create() API
for each socket and not use the new xsk_socket__create_shared() API.
This behavior was ruined by the commit introducing XDP_SHARED_UMEM
support between different devices and/or queue ids. This patch restores
the ability to use xsk_socket__create in these circumstances so that
backward compatibility is not broken.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1602070946-11154-1-git-send-email-magnus.karlsson@gmail.com
bpf_program__set_attach_target(prog, fd, ...) will always fail when
fd = 0 (attach to a kernel symbol) because obj->btf_vmlinux is NULL
and there is no way to set it (at the moment btf_vmlinux is meant
to be temporary storage for use in bpf_object__load_xattr()).
Fix this by using libbpf_find_vmlinux_btf_id().
At some point we may want to opportunistically cache btf_vmlinux
so it can be reused with multiple programs.
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Petar Penkov <ppenkov@google.com>
Link: https://lore.kernel.org/bpf/20201005224528.389097-1-lrizzo@google.com
Say a user reuse map fd after creating a map manually and set the
pin_path, then load the object via libbpf.
In libbpf bpf_object__create_maps(), bpf_object__reuse_map() will
return 0 if there is no pinned map in map->pin_path. Then after
checking if map fd exist, we should also check if pin_path was set
and do bpf_map__pin() instead of continue the loop.
Fix it by creating map if fd not exist and continue checking pin_path
after that.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201006021345.3817033-3-liuhangbin@gmail.com
If a ksym is defined with a type, libbpf will try to find the ksym's btf
information from kernel btf. If a valid btf entry for the ksym is found,
libbpf can pass in the found btf id to the verifier, which validates the
ksym's type and value.
Typeless ksyms (i.e. those defined as 'void') will not have such btf_id,
but it has the symbol's address (read from kallsyms) and its value is
treated as a raw pointer.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200929235049.2533242-3-haoluo@google.com
Ensure that btf_dump can accommodate new BTF types being appended to BTF
instance after struct btf_dump was created. This came up during attemp to
use btf_dump for raw type dumping in selftests, but given changes are not
excessive, it's good to not have any gotchas in API usage, so I decided to
support such use case in general.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200929232843.1249318-2-andriin@fb.com
Port of tail_call_static() helper function from Cilium's BPF code base [0]
to libbpf, so others can easily consume it as well. We've been using this
in production code for some time now. The main idea is that we guarantee
that the kernel's BPF infrastructure and JIT (here: x86_64) can patch the
JITed BPF insns with direct jumps instead of having to fall back to using
expensive retpolines. By using inline asm, we guarantee that the compiler
won't merge the call from different paths with potentially different
content of r2/r3.
We're also using Cilium's __throw_build_bug() macro (here as: __bpf_unreachable())
in different places as a neat trick to trigger compilation errors when
compiler does not remove code at compilation time. This works for the BPF
back end as it does not implement the __builtin_trap().
[0] f5537c2602
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1656a082e077552eb46642d513b4a6bde9a7dd01.1601477936.git.daniel@iogearbox.net
Fix obvious unitialized variable use that wasn't reported by compiler. libbpf
Makefile changes to catch such errors are added separately.
Fixes: 3289959b97ca ("libbpf: Support BTF loading and raw data output in both endianness")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200929220604.833631-1-andriin@fb.com
Teach BTF to recognized wrong endianness and transparently convert it
internally to host endianness. Original endianness of BTF will be preserved
and used during btf__get_raw_data() to convert resulting raw data to the same
endianness and a source raw_data. This means that little-endian host can parse
big-endian BTF with no issues, all the type data will be presented to the
client application in native endianness, but when it's time for emitting BTF
to persist it in a file (e.g., after BTF deduplication), original non-native
endianness will be preserved and stored.
It's possible to query original endianness of BTF data with new
btf__endianness() API. It's also possible to override desired output
endianness with btf__set_endianness(), so that if application needs to load,
say, big-endian BTF and store it as little-endian BTF, it's possible to
manually override this. If btf__set_endianness() was used to change
endianness, btf__endianness() will reflect overridden endianness.
Given there are no known use cases for supporting cross-endianness for
.BTF.ext, loading .BTF.ext in non-native endianness is not supported.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200929043046.1324350-3-andriin@fb.com
BTF strings are used not just for names, they can be arbitrary strings used
for CO-RE relocations, line/func infos, etc. Thus "name_by_offset" terminology
is too specific and might be misleading. Instead, introduce
btf__str_by_offset() API which uses generic string terminology.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200929020533.711288-3-andriin@fb.com
Add APIs for appending new BTF types at the end of BTF object.
Each BTF kind has either one API of the form btf__add_<kind>(). For types
that have variable amount of additional items (struct/union, enum, func_proto,
datasec), additional API is provided to emit each such item. E.g., for
emitting a struct, one would use the following sequence of API calls:
btf__add_struct(...);
btf__add_field(...);
...
btf__add_field(...);
Each btf__add_field() will ensure that the last BTF type is of STRUCT or
UNION kind and will automatically increment that type's vlen field.
All the strings are provided as C strings (const char *), not a string offset.
This significantly improves usability of BTF writer APIs. All such strings
will be automatically appended to string section or existing string will be
re-used, if such string was already added previously.
Each API attempts to do all the reasonable validations, like enforcing
non-empty names for entities with required names, proper value bounds, various
bit offset restrictions, etc.
Type ID validation is minimal because it's possible to emit a type that refers
to type that will be emitted later, so libbpf has no way to enforce such
cases. User must be careful to properly emit all the necessary types and
specify type IDs that will be valid in the finally generated BTF.
Each of btf__add_<kind>() APIs return new type ID on success or negative
value on error. APIs like btf__add_field() that emit additional items
return zero on success and negative value on error.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200929020533.711288-2-andriin@fb.com
Allow internal BTF representation to switch from default read-only mode, in
which raw BTF data is a single non-modifiable block of memory with BTF header,
types, and strings layed out sequentially and contiguously in memory, into
a writable representation with types and strings data split out into separate
memory regions, that can be dynamically expanded.
Such writable internal representation is transparent to users of libbpf APIs,
but allows to append new types and strings at the end of BTF, which is
a typical use case when generating BTF programmatically. All the basic
guarantees of BTF types and strings layout is preserved, i.e., user can get
`struct btf_type *` pointer and read it directly. Such btf_type pointers might
be invalidated if BTF is modified, so some care is required in such mixed
read/write scenarios.
Switch from read-only to writable configuration happens automatically the
first time when user attempts to modify BTF by either adding a new type or new
string. It is still possible to get raw BTF data, which is a single piece of
memory that can be persisted in ELF section or into a file as raw BTF. Such
raw data memory is also still owned by BTF and will be freed either when BTF
object is freed or if another modification to BTF happens, as any modification
invalidates BTF raw representation.
This patch adds the first two BTF manipulation APIs: btf__add_str(), which
allows to add arbitrary strings to BTF string section, and btf__find_str()
which allows to find existing string offset, but not add it if it's missing.
All the added strings are automatically deduplicated. This is achieved by
maintaining an additional string lookup index for all unique strings. Such
index is built when BTF is switched to modifiable mode. If at that time BTF
strings section contained duplicate strings, they are not de-duplicated. This
is done specifically to not modify the existing content of BTF (types, their
string offsets, etc), which can cause confusion and is especially important
property if there is struct btf_ext associated with struct btf. By following
this "imperfect deduplication" process, btf_ext is kept consitent and correct.
If deduplication of strings is necessary, it can be forced by doing BTF
deduplication, at which point all the strings will be eagerly deduplicated and
all string offsets both in struct btf and struct btf_ext will be updated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-6-andriin@fb.com
Refactor internals of struct btf to remove assumptions that BTF header, type
data, and string data are layed out contiguously in a memory in a single
memory allocation. Now we have three separate pointers pointing to the start
of each respective are: header, types, strings. In the next patches, these
pointers will be re-assigned to point to independently allocated memory areas,
if BTF needs to be modified.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-3-andriin@fb.com
Refactor implementation of internal BTF type index to not use direct pointers.
Instead it uses offset relative to the start of types data section. This
allows for types data to be reallocatable, enabling implementation of
modifiable BTF.
As now getting type by ID has an extra indirection step, convert all internal
type lookups to a new helper btf_type_id(), that returns non-const pointer to
a type by its ID.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-2-andriin@fb.com
When syncing latest libbpf repo to bcc, ubuntu 16.04 (4.4.0 LTS kernel)
failed compilation for xsk.c:
In file included from /tmp/debuild.0jkauG/bcc/src/cc/libbpf/src/xsk.c:23:0:
/tmp/debuild.0jkauG/bcc/src/cc/libbpf/src/xsk.c: In function ‘xsk_get_ctx’:
/tmp/debuild.0jkauG/bcc/src/cc/libbpf/include/linux/list.h:81:9: warning: implicit
declaration of function ‘container_of’ [-Wimplicit-function-declaration]
container_of(ptr, type, member)
^
/tmp/debuild.0jkauG/bcc/src/cc/libbpf/include/linux/list.h:83:9: note: in expansion
of macro ‘list_entry’
list_entry((ptr)->next, type, member)
...
src/cc/CMakeFiles/bpf-static.dir/build.make:209: recipe for target
'src/cc/CMakeFiles/bpf-static.dir/libbpf/src/xsk.c.o' failed
Commit 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
added include file <linux/list.h>, which uses macro "container_of".
xsk.c file also includes <linux/ethtool.h> before <linux/list.h>.
In a more recent distro kernel, <linux/ethtool.h> includes <linux/kernel.h>
which contains the macro definition for "container_of". So compilation is all fine.
But in ubuntu 16.04 kernel, <linux/ethtool.h> does not contain <linux/kernel.h>
which caused the above compilation error.
Let explicitly add <linux/kernel.h> in xsk.c to avoid compilation error
in old distro's.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200914223210.1831262-1-yhs@fb.com
Fix regression in libbpf, introduced by XDP link change, which causes XDP
programs to fail to be loaded into kernel due to specified BPF_XDP
expected_attach_type. While kernel doesn't enforce expected_attach_type for
BPF_PROG_TYPE_XDP, some old kernels already support XDP program, but they
don't yet recognize expected_attach_type field in bpf_attr, so setting it to
non-zero value causes program load to fail.
Luckily, libbpf already has a mechanism to deal with such cases, so just make
expected_attach_type optional for XDP programs.
Fixes: dc8698cac7aa ("libbpf: Add support for BPF XDP link")
Reported-by: Nikita Shirokov <tehnerd@tehnerd.com>
Reported-by: Udip Pant <udippant@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200924171705.3803628-1-andriin@fb.com
Code in btf__parse_raw() fails to detect raw BTF of non-native endianness
and assumes it must be ELF data, which then fails to parse as ELF and
yields a misleading error message:
root:/# bpftool btf dump file /sys/kernel/btf/vmlinux
libbpf: failed to get EHDR from /sys/kernel/btf/vmlinux
For example, this could occur after cross-compiling a BTF-enabled kernel
for a target with non-native endianness, which is currently unsupported.
Check for correct endianness and emit a clearer error message:
root:/# bpftool btf dump file /sys/kernel/btf/vmlinux
libbpf: non-native BTF endianness is not supported
Fixes: 94a1fedd63ed ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/90f81508ecc57bc0da318e0fe0f45cfe49b17ea7.1600417359.git.Tony.Ambardar@gmail.com
