Eric Dumazet suggested to allow users to modify max GRO packet size.
We have seen GRO being disabled by users of appliances (such as
wifi access points) because of claimed bufferbloat issues,
or some work arounds in sch_cake, to split GRO/GSO packets.
Instead of disabling GRO completely, one can chose to limit
the maximum packet size of GRO packets, depending on their
latency constraints.
This patch adds a per device gro_max_size attribute
that can be changed with ip link command.
ip link set dev eth0 gro_max_size 16000
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds documention for:
- bpf_map_delete_batch()
- bpf_map_lookup_batch()
- bpf_map_lookup_and_delete_batch()
- bpf_map_update_batch()
This also updates the public API for the `keys` parameter
of `bpf_map_delete_batch()`, and both the
`keys` and `values` parameters of `bpf_map_update_batch()`
to be constants.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220106201304.112675-1-grantseltzer@gmail.com
With perf_buffer__poll() and perf_buffer__consume() APIs available,
there is no reason to expose bpf_perf_event_read_simple() API to
users. If users need custom perf buffer, they could re-implement
the function.
Mark bpf_perf_event_read_simple() and move the logic to a new
static function so it can still be called by other functions in the
same file.
[0] Closes: https://github.com/libbpf/libbpf/issues/310
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211229204156.13569-1-christylee@fb.com
Ubuntu reports incorrect kernel version through uname(), which on older
kernels leads to kprobe BPF programs failing to load due to the version
check mismatch.
Accommodate Ubuntu's quirks with LINUX_VERSION_CODE by using
Ubuntu-specific /proc/version_code to fetch major/minor/patch versions
to form LINUX_VERSION_CODE.
While at it, consolide libbpf's kernel version detection code between
libbpf.c and libbpf_probes.c.
[0] Closes: https://github.com/libbpf/libbpf/issues/421
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211222231003.2334940-1-andrii@kernel.org
Refactor PT_REGS macros definitions in bpf_tracing.h to avoid excessive
duplication. We currently have classic PT_REGS_xxx() and CO-RE-enabled
PT_REGS_xxx_CORE(). We are about to add also _SYSCALL variants, which
would require excessive copying of all the per-architecture definitions.
Instead, separate architecture-specific field/register names from the
final macro that utilize them. That way for upcoming _SYSCALL variants
we'll be able to just define x86_64 exception and otherwise have one
common set of _SYSCALL macro definitions common for all architectures.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20211222213924.1869758-1-andrii@kernel.org
Given that the rootfs for Arch Linux uses the busybox variant of
mount(8), the `-l` doesn't exist on that binary and gives the following
error msg with version v1.34.1 of busybox when invoking
mkrootfs_arch.sh:
```
...
[ 0.781471] random: fast init done
starting pid 72, tty '': '/etc/init.d/rcS'
+ for path in /etc/rcS.d/S*
+ '[' -x /etc/rcS.d/S10-mount ']'
+ /etc/rcS.d/S10-mount
+ /bin/mount proc /proc -t proc
++ /bin/mount -l -t devtmpfs
/bin/mount: unrecognized option: l
...
```
This prevented me from generating a rootfs. This is fixed by removing
the `-l`, as plainly invoking `mount -t devtmpfs` returns the same
output with `mount -l ...` on the non-busybox variant (on Arch Linux, it
comes from the `utils-linux` package). After this change, I was able to
run `./tools/testing/selftests/bpf/vmtest.sh -i` (from the kernel src;
with modification to the script to pick up my locally-generated .zstd of
the new rootfs) and it worked.
Signed-off-by: Chris Tarazi <tarazichris@gmail.com>
Create three extensible alternatives to inconsistently named
feature-probing APIs:
- libbpf_probe_bpf_prog_type() instead of bpf_probe_prog_type();
- libbpf_probe_bpf_map_type() instead of bpf_probe_map_type();
- libbpf_probe_bpf_helper() instead of bpf_probe_helper().
Set up return values such that libbpf can report errors (e.g., if some
combination of input arguments isn't possible to validate, etc), in
addition to whether the feature is supported (return value 1) or not
supported (return value 0).
Also schedule deprecation of those three APIs. Also schedule deprecation
of bpf_probe_large_insn_limit().
Also fix all the existing detection logic for various program and map
types that never worked:
- BPF_PROG_TYPE_LIRC_MODE2;
- BPF_PROG_TYPE_TRACING;
- BPF_PROG_TYPE_LSM;
- BPF_PROG_TYPE_EXT;
- BPF_PROG_TYPE_SYSCALL;
- BPF_PROG_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_BLOOM_FILTER.
Above prog/map types needed special setups and detection logic to work.
Subsequent patch adds selftests that will make sure that all the
detection logic keeps working for all current and future program and map
types, avoiding otherwise inevitable bit rot.
[0] Closes: https://github.com/libbpf/libbpf/issues/312
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-2-andrii@kernel.org
Fix possible read beyond ELF "license" data section if the license
string is not properly zero-terminated. Use the fact that libbpf_strlcpy
never accesses the (N-1)st byte of the source string because it's
replaced with '\0' anyways.
If this happens, it's a violation of contract between libbpf and a user,
but not handling this more robustly upsets CIFuzz, so given the fix is
trivial, let's fix the potential issue.
Fixes: 9fc205b413b3 ("libbpf: Add sane strncpy alternative and use it internally")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211214232054.3458774-1-andrii@kernel.org
The need to increase RLIMIT_MEMLOCK to do anything useful with BPF is
one of the first extremely frustrating gotchas that all new BPF users go
through and in some cases have to learn it a very hard way.
Luckily, starting with upstream Linux kernel version 5.11, BPF subsystem
dropped the dependency on memlock and uses memcg-based memory accounting
instead. Unfortunately, detecting memcg-based BPF memory accounting is
far from trivial (as can be evidenced by this patch), so in practice
most BPF applications still do unconditional RLIMIT_MEMLOCK increase.
As we move towards libbpf 1.0, it would be good to allow users to forget
about RLIMIT_MEMLOCK vs memcg and let libbpf do the sensible adjustment
automatically. This patch paves the way forward in this matter. Libbpf
will do feature detection of memcg-based accounting, and if detected,
will do nothing. But if the kernel is too old, just like BCC, libbpf
will automatically increase RLIMIT_MEMLOCK on behalf of user
application ([0]).
As this is technically a breaking change, during the transition period
applications have to opt into libbpf 1.0 mode by setting
LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK bit when calling
libbpf_set_strict_mode().
Libbpf allows to control the exact amount of set RLIMIT_MEMLOCK limit
with libbpf_set_memlock_rlim_max() API. Passing 0 will make libbpf do
nothing with RLIMIT_MEMLOCK. libbpf_set_memlock_rlim_max() has to be
called before the first bpf_prog_load(), bpf_btf_load(), or
bpf_object__load() call, otherwise it has no effect and will return
-EBUSY.
[0] Closes: https://github.com/libbpf/libbpf/issues/369
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214195904.1785155-2-andrii@kernel.org
strncpy() has a notoriously error-prone semantics which makes GCC
complain about it a lot (and quite often completely completely falsely
at that). Instead of pleasing GCC all the time (-Wno-stringop-truncation
is unfortunately only supported by GCC, so it's a bit too messy to just
enable it in Makefile), add libbpf-internal libbpf_strlcpy() helper
which follows what FreeBSD's strlcpy() does and what most people would
expect from strncpy(): copies up to N-1 first bytes from source string
into destination string and ensures zero-termination afterwards.
Replace all the relevant uses of strncpy/strncat/memcpy in libbpf with
libbpf_strlcpy().
This also fixes the issue reported by Emmanuel Deloget in xsk.c where
memcpy() could access source string beyond its end.
Fixes: 2f6324a3937f8 (libbpf: Support shared umems between queues and devices)
Reported-by: Emmanuel Deloget <emmanuel.deloget@eho.link>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211211004043.2374068-1-andrii@kernel.org
In case of BPF_CORE_TYPE_ID_LOCAL we fill out target result explicitly.
But targ_res itself isn't initialized in such a case, and subsequent
call to bpf_core_patch_insn() might read uninitialized field (like
fail_memsz_adjust in this case). So ensure that targ_res is
zero-initialized for BPF_CORE_TYPE_ID_LOCAL case.
This was reported by Coverity static analyzer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214010032.3843804-1-andrii@kernel.org
Adding following helpers for tracing programs:
Get n-th argument of the traced function:
long bpf_get_func_arg(void *ctx, u32 n, u64 *value)
Get return value of the traced function:
long bpf_get_func_ret(void *ctx, u64 *value)
Get arguments count of the traced function:
long bpf_get_func_arg_cnt(void *ctx)
The trampoline now stores number of arguments on ctx-8
address, so it's easy to verify argument index and find
return value argument's position.
Moving function ip address on the trampoline stack behind
the number of functions arguments, so it's now stored on
ctx-16 address if it's needed.
All helpers above are inlined by verifier.
Also bit unrelated small change - using newly added function
bpf_prog_has_trampoline in check_get_func_ip.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-5-jolsa@kernel.org
During linking, type IDs in the resulting linked BPF object file can
change, and so ldimm64 instructions corresponding to
BPF_CORE_TYPE_ID_TARGET and BPF_CORE_TYPE_ID_LOCAL CO-RE relos can get
their imm value out of sync with actual CO-RE relocation information
that's updated by BPF linker properly during linking process.
We could teach BPF linker to adjust such instructions, but it feels
a bit too much for linker to re-implement good chunk of
bpf_core_patch_insns logic just for this. This is a redundant safety
check for TYPE_ID relocations, as the real validation is in matching
CO-RE specs, so if that works fine, it's very unlikely that there is
something wrong with the instruction itself.
So, instead, teach libbpf (and kernel) to ignore insn->imm for
BPF_CORE_TYPE_ID_TARGET and BPF_CORE_TYPE_ID_LOCAL relos.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211213010706.100231-1-andrii@kernel.org
libbpf's obj->nr_programs includes static and global functions. That number
could be higher than the actual number of bpf programs going be loaded by
gen_loader. Passing larger nr_programs to bpf_gen__init() doesn't hurt. Those
exra stack slots will stay as zero. bpf_gen__finish() needs to check that
actual number of progs that gen_loader saw is less than or equal to
obj->nr_programs.
Fixes: ba05fd36b851 ("libbpf: Perform map fd cleanup for gen_loader in case of error")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix error: "failed to pin map: Bad file descriptor, path:
/sys/fs/bpf/_rodata_str1_1."
In the old kernel, the global data map will not be created, see [0]. So
we should skip the pinning of the global data map to avoid
bpf_object__pin_maps returning error. Therefore, when the map is not
created, we mark “map->skipped" as true and then check during relocation
and during pinning.
Fixes: 16e0c35c6f7a ("libbpf: Load global data maps lazily on legacy kernels")
Signed-off-by: Shuyi Cheng <chengshuyi@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Deprecate non-extensible bpf_object__load_xattr() in v0.8 ([0]).
With log_level control through bpf_object_open_opts or
bpf_program__set_log_level(), we are finally at the point where
bpf_object__load_xattr() doesn't provide any functionality that can't be
accessed through other (better) ways. The other feature,
target_btf_path, is also controllable through bpf_object_open_opts.
[0] Closes: https://github.com/libbpf/libbpf/issues/289
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-9-andrii@kernel.org
Allow to set user-provided log buffer on a per-program basis ([0]). This
gives great deal of flexibility in terms of which programs are loaded
with logging enabled and where corresponding logs go.
Log buffer set with bpf_program__set_log_buf() overrides kernel_log_buf
and kernel_log_size settings set at bpf_object open time through
bpf_object_open_opts, if any.
Adjust bpf_object_load_prog_instance() logic to not perform own log buf
allocation and load retry if custom log buffer is provided by the user.
[0] Closes: https://github.com/libbpf/libbpf/issues/418
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-8-andrii@kernel.org
Instead of rewriting error code returned by the kernel of prog load with
libbpf-sepcific variants pass through the original error.
There is now also no need to have a backup generic -LIBBPF_ERRNO__LOAD
fallback error as bpf_prog_load() guarantees that errno will be properly
set no matter what.
Also drop a completely outdated and pretty useless BPF_PROG_TYPE_KPROBE
guess logic. It's not necessary and neither it's helpful in modern BPF
applications.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-7-andrii@kernel.org
Add missing "prog '%s': " prefixes in few places and use consistently
markers for beginning and end of program load logs. Here's an example of
log output:
libbpf: prog 'handler': BPF program load failed: Permission denied
libbpf: -- BEGIN PROG LOAD LOG ---
arg#0 reference type('UNKNOWN ') size cannot be determined: -22
; out1 = in1;
0: (18) r1 = 0xffffc9000cdcc000
2: (61) r1 = *(u32 *)(r1 +0)
...
81: (63) *(u32 *)(r4 +0) = r5
R1_w=map_value(id=0,off=16,ks=4,vs=20,imm=0) R4=map_value(id=0,off=400,ks=4,vs=16,imm=0)
invalid access to map value, value_size=16 off=400 size=4
R4 min value is outside of the allowed memory range
processed 63 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
libbpf: failed to load program 'handler'
libbpf: failed to load object 'test_skeleton'
The entire verifier log, including BEGIN and END markers are now always
youtput during a single print callback call. This should make it much
easier to post-process or parse it, if necessary. It's not an explicit
API guarantee, but it can be reasonably expected to stay like that.
Also __bpf_object__open is renamed to bpf_object_open() as it's always
an adventure to find the exact function that implements bpf_object's
open phase, so drop the double underscored and use internal libbpf
naming convention.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-6-andrii@kernel.org
Allow users to provide their own custom log_buf, log_size, and log_level
at bpf_object level through bpf_object_open_opts. This log_buf will be
used during BTF loading. Subsequent patch will use same log_buf during
BPF program loading, unless overriden at per-bpf_program level.
When such custom log_buf is provided, libbpf won't be attempting
retrying loading of BTF to try to provide its own log buffer to capture
kernel's error log output. User is responsible to provide big enough
buffer, otherwise they run a risk of getting -ENOSPC error from the
bpf() syscall.
See also comments in bpf_object_open_opts regarding log_level and
log_buf interactions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-5-andrii@kernel.org
Add libbpf-internal btf_load_into_kernel() that allows to pass
preallocated log_buf and custom log_level to be passed into kernel
during BPF_BTF_LOAD call. When custom log_buf is provided,
btf_load_into_kernel() won't attempt an retry with automatically
allocated internal temporary buffer to capture BTF validation log.
It's important to note the relation between log_buf and log_level, which
slightly deviates from stricter kernel logic. From kernel's POV, if
log_buf is specified, log_level has to be > 0, and vice versa. While
kernel has good reasons to request such "sanity, this, in practice, is
a bit unconvenient and restrictive for libbpf's high-level bpf_object APIs.
So libbpf will allow to set non-NULL log_buf and log_level == 0. This is
fine and means to attempt to load BTF without logging requested, but if
it failes, retry the load with custom log_buf and log_level 1. Similar
logic will be implemented for program loading. In practice this means
that users can provide custom log buffer just in case error happens, but
not really request slower verbose logging all the time. This is also
consistent with libbpf behavior when custom log_buf is not set: libbpf
first tries to load everything with log_level=0, and only if error
happens allocates internal log buffer and retries with log_level=1.
Also, while at it, make BTF validation log more obvious and follow the log
pattern libbpf is using for dumping BPF verifier log during
BPF_PROG_LOAD. BTF loading resulting in an error will look like this:
libbpf: BTF loading error: -22
libbpf: -- BEGIN BTF LOAD LOG ---
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 1040
str_off: 1040
str_len: 2063598257
btf_total_size: 1753
Total section length too long
-- END BTF LOAD LOG --
libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
This makes it much easier to find relevant parts in libbpf log output.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-4-andrii@kernel.org
Similar to previous bpf_prog_load() and bpf_map_create() APIs, add
bpf_btf_load() API which is taking optional OPTS struct. Schedule
bpf_load_btf() for deprecation in v0.8 ([0]).
This makes naming consistent with BPF_BTF_LOAD command, sets up an API
for extensibility in the future, moves options parameters (log-related
fields) into optional options, and also allows to pass log_level
directly.
It also removes log buffer auto-allocation logic from low-level API
(consistent with bpf_prog_load() behavior), but preserves a special
treatment of log_level == 0 with non-NULL log_buf, which matches
low-level bpf_prog_load() and high-level libbpf APIs for BTF and program
loading behaviors.
[0] Closes: https://github.com/libbpf/libbpf/issues/419
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-3-andrii@kernel.org
To unify libbpf APIs behavior w.r.t. log_buf and log_level, fix
bpf_prog_load() to follow the same logic as bpf_btf_load() and
high-level bpf_object__load() API will follow in the subsequent patches:
- if log_level is 0 and non-NULL log_buf is provided by a user, attempt
load operation initially with no log_buf and log_level set;
- if successful, we are done, return new FD;
- on error, retry the load operation with log_level bumped to 1 and
log_buf set; this way verbose logging will be requested only when we
are sure that there is a failure, but will be fast in the
common/expected success case.
Of course, user can still specify log_level > 0 from the very beginning
to force log collection.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-2-andrii@kernel.org
