Due to the alignment requirements of siginfo_t, as described in
3ddb3fd8cdb0 ("signal, perf: Fix siginfo_t by avoiding u64 on 32-bit
architectures"), siginfo_t::si_perf_data is limited to an unsigned long.
However, perf_event_attr::sig_data is an u64, to avoid having to deal
with compat conversions. Due to being an u64, it may not immediately be
clear to users that sig_data is truncated on 32 bit architectures.
Add a comment to explicitly point this out, and hopefully help some
users save time by not having to deduce themselves what's happening.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-3-elver@google.com
When receiving netlink messages, libbpf was using a statically allocated
stack buffer of 4k bytes. This happened to work fine on systems with a 4k
page size, but on systems with larger page sizes it can lead to truncated
messages. The user-visible impact of this was that libbpf would insist no
XDP program was attached to some interfaces because that bit of the netlink
message got chopped off.
Fix this by switching to a dynamically allocated buffer; we borrow the
approach from iproute2 of using recvmsg() with MSG_PEEK|MSG_TRUNC to get
the actual size of the pending message before receiving it, adjusting the
buffer as necessary. While we're at it, also add retries on interrupted
system calls around the recvmsg() call.
v2:
- Move peek logic to libbpf_netlink_recv(), don't double free on ENOMEM.
Fixes: 8bbb77b7c7a2 ("libbpf: Add various netlink helpers")
Reported-by: Zhiqian Guan <zhguan@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20220211234819.612288-1-toke@redhat.com
Prepare light skeleton to be used in the kernel module and in the user space.
The look and feel of lskel.h is mostly the same with the difference that for
user space the skel->rodata is the same pointer before and after skel_load
operation, while in the kernel the skel->rodata after skel_open and the
skel->rodata after skel_load are different pointers.
Typical usage of skeleton remains the same for kernel and user space:
skel = my_bpf__open();
skel->rodata->my_global_var = init_val;
err = my_bpf__load(skel);
err = my_bpf__attach(skel);
// access skel->rodata->my_global_var;
// access skel->bss->another_var;
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209232001.27490-3-alexei.starovoitov@gmail.com
Add syscall-specific variant of BPF_KPROBE named BPF_KPROBE_SYSCALL ([0]).
The new macro hides the underlying way of getting syscall input arguments.
With the new macro, the following code:
SEC("kprobe/__x64_sys_close")
int BPF_KPROBE(do_sys_close, struct pt_regs *regs)
{
int fd;
fd = PT_REGS_PARM1_CORE(regs);
/* do something with fd */
}
can be written as:
SEC("kprobe/__x64_sys_close")
int BPF_KPROBE_SYSCALL(do_sys_close, int fd)
{
/* do something with fd */
}
[0] Closes: https://github.com/libbpf/libbpf/issues/425
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207143134.2977852-2-hengqi.chen@gmail.com
On s390, the first syscall argument should be accessed via orig_gpr2
(see arch/s390/include/asm/syscall.h). Currently gpr[2] is used
instead, leading to bpf_syscall_macro test failure.
orig_gpr2 cannot be added to user_pt_regs, since its layout is a part
of the ABI. Therefore provide access to it only through
PT_REGS_PARM1_CORE_SYSCALL() by using a struct pt_regs flavor.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-11-iii@linux.ibm.com
On arm64, the first syscall argument should be accessed via orig_x0
(see arch/arm64/include/asm/syscall.h). Currently regs[0] is used
instead, leading to bpf_syscall_macro test failure.
orig_x0 cannot be added to struct user_pt_regs, since its layout is a
part of the ABI. Therefore provide access to it only through
PT_REGS_PARM1_CORE_SYSCALL() by using a struct pt_regs flavor.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-10-iii@linux.ibm.com
riscv registers are accessed via struct user_regs_struct, not struct
pt_regs. The program counter member in this struct is called pc, not
epc. The frame pointer is called s0, not fp.
Fixes: 3cc31d794097 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-6-iii@linux.ibm.com
libbpf_set_strict_mode() checks that the passed mode doesn't contain
extra bits for LIBBPF_STRICT_* flags that don't exist yet.
It makes it difficult for applications to disable some strict flags as
something like "LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS"
is rejected by this check and they have to use a rather complicated
formula to calculate it.[0]
One possibility is to change LIBBPF_STRICT_ALL to only contain the bits
of all existing LIBBPF_STRICT_* flags instead of 0xffffffff. However
it's not possible because the idea is that applications compiled against
older libbpf_legacy.h would still be opting into latest
LIBBPF_STRICT_ALL features.[1]
The other possibility is to remove that check so something like
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" is allowed. It's
what this commit does.
[0]: https://lore.kernel.org/bpf/20220204220435.301896-1-mauricio@kinvolk.io/
[1]: https://lore.kernel.org/bpf/CAEf4BzaTWa9fELJLh+bxnOb0P1EMQmaRbJVG0L+nXZdy0b8G3Q@mail.gmail.com/
Fixes: 93b8952d223a ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-2-mauricio@kinvolk.io
btf_ext__{func,line}_info_rec_size functions are used in conjunction
with already-deprecated btf_ext__reloc_{func,line}_info functions. Since
struct btf_ext is opaque to the user it was necessary to expose rec_size
getters in the past.
btf_ext__reloc_{func,line}_info were deprecated in commit 8505e8709b5ee
("libbpf: Implement generalized .BTF.ext func/line info adjustment")
as they're not compatible with support for multiple programs per
section. It was decided[0] that users of these APIs should implement their
own .btf.ext parsing to access this data, in which case the rec_size
getters are unnecessary. So deprecate them from libbpf 0.7.0 onwards.
[0] Closes: https://github.com/libbpf/libbpf/issues/277
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201014610.3522985-1-davemarchevsky@fb.com
Add coverage to the verifier tests and tests for reading bpf_sock fields to
ensure that 32-bit, 16-bit, and 8-bit loads from dst_port field are allowed
only at intended offsets and produce expected values.
While 16-bit and 8-bit access to dst_port field is straight-forward, 32-bit
wide loads need be allowed and produce a zero-padded 16-bit value for
backward compatibility.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-3-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are no relevant libbpf commits, but new checkpoint commit contains
important BPF selftests commits fixing CI failures from kernel repo
side.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Without it coverage reports can't be built
```
[2022-01-31 00:05:36,094 DEBUG] Generating file view html index file as: "/out/report/linux/file_view_index.html".
Traceback (most recent call last):
File "/opt/code_coverage/coverage_utils.py", line 829, in <module>
sys.exit(Main())
File "/opt/code_coverage/coverage_utils.py", line 823, in Main
return _CmdPostProcess(args)
File "/opt/code_coverage/coverage_utils.py", line 780, in _CmdPostProcess
processor.PrepareHtmlReport()
File "/opt/code_coverage/coverage_utils.py", line 577, in PrepareHtmlReport
self.GenerateFileViewHtmlIndexFile(per_file_coverage_summary,
File "/opt/code_coverage/coverage_utils.py", line 450, in GenerateFileViewHtmlIndexFile
self.GetCoverageHtmlReportPathForFile(file_path),
File "/opt/code_coverage/coverage_utils.py", line 422, in GetCoverageHtmlReportPathForFile
assert os.path.isfile(
AssertionError: "/tmp/tmp.UYax4l19Gh/lib/system.h" is not a file.
```
It's a follow-up to 393a058d06
Signed-off-by: Evgeny Vereshchagin <evvers@ya.ru>
TASK_COMM_LEN is now part of vmlinux.h on latest kernel. Regenerate
vmlinux.h to have it on 5.5 and 4.9 kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Not sure why these APIs were added in the first place instead of
a completely generic (and not requiring constantly adding new APIs with
each new BPF program type) bpf_program__type() and
bpf_program__set_type() APIs. But as it is right now, there are 13 such
specialized is_type/set_type APIs, while latest kernel is already at 30+
BPF program types.
Instead of completing the set of APIs and keep chasing kernel's
bpf_prog_type enum, deprecate existing subset and recommend generic
bpf_program__type() and bpf_program__set_type() APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220124194254.2051434-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Deprecated bpf_map__resize() in favor of bpf_map__set_max_entries()
setter. In addition to having a surprising name (users often don't
realize that they need to use bpf_map__resize()), the name also implies
some magic way of resizing BPF map after it is created, which is clearly
not the case.
Another minor annoyance is that bpf_map__resize() disallows 0 value for
max_entries, which in some cases is totally acceptable (e.g., like for
BPF perf buf case to let libbpf auto-create one buffer per each
available CPU core).
[0] Closes: https://github.com/libbpf/libbpf/issues/304
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220124194254.2051434-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds a helper for bpf programs to read the memory of other
tasks.
As an example use case at Meta, we are using a bpf task iterator program
and this new helper to print C++ async stack traces for all threads of
a given process.
Signed-off-by: Kenny Yu <kennyyu@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220124185403.468466-3-kennyyu@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new macros for mem_hops field which can be used to
represent remote-node, socket and board level details.
Currently the code had macro for HOPS_0, which corresponds
to data coming from another core but same node.
Add new macros for HOPS_1 to HOPS_3 to represent
remote-node, socket and board level data.
For ex: Encodings for mem_hops fields with L2 cache:
L2 - local L2
L2 | REMOTE | HOPS_0 - remote core, same node L2
L2 | REMOTE | HOPS_1 - remote node, same socket L2
L2 | REMOTE | HOPS_2 - remote socket, same board L2
L2 | REMOTE | HOPS_3 - remote board L2
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211206091749.87585-2-kjain@linux.ibm.com
This header is necessary for libbpf-sys to generate perf-related Rust
bindings. It's more convenient to have it available locally with libbpf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
There is a new Ubuntu-based builder, and setup steps for it are
slightly different from what we had on the old RHEL-based one.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
