In a prior change, the verifier was updated to support sleepable
BPF_PROG_TYPE_STRUCT_OPS programs. A caller could set the program as
sleepable with bpf_program__set_flags(), but it would be more ergonomic
and more in-line with other sleepable program types if we supported
suffixing a struct_ops section name with .s to indicate that it's
sleepable.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Each architecture supports at least 6 syscall argument registers, so now
that specs for each architecture is defined in bpf_tracing.h, remove
unnecessary macro overrides, which previously were required to keep
existing BPF_KSYSCALL() uses compiling and working.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-26-andrii@kernel.org
Set up generic support in bpf_tracing.h for up to 7 syscall arguments
tracing with BPF_KSYSCALL, which seems to be the limit according to
syscall(2) manpage. Also change the way that syscall convention is
specified to be more explicit. Subsequent patches will adjust and define
proper per-architecture syscall conventions.
__PT_PARM1_SYSCALL_REG through __PT_PARM6_SYSCALL_REG is added
temporarily to keep everything working before each architecture has
syscall reg tables defined. They will be removed afterwards.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-13-andrii@kernel.org
Add BPF_UPROBE and BPF_URETPROBE macros, aliased to BPF_KPROBE and
BPF_KRETPROBE, respectively. This makes uprobe-based BPF program code
much less confusing, especially to people new to tracing, at no cost in
terms of maintainability. We'll use this macro in selftests in
subsequent patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-11-andrii@kernel.org
Add BPF_KPROBE() and PT_REGS_PARMx() support for up to 8 arguments, if
target architecture supports this. Currently all architectures are
limited to only 5 register-placed arguments, which is limiting even on
x86-64.
This patch adds generic macro machinery to support up to 8 arguments
both when explicitly fetching it from pt_regs through PT_REGS_PARMx()
macros, as well as more ergonomic access in BPF_KPROBE().
Also, for i386 architecture we now don't have to define fake PARM4 and
PARM5 definitions, they will be generically substituted, just like for
PARM6 through PARM8.
Subsequent patches will fill out architecture-specific definitions,
where appropriate.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Link: https://lore.kernel.org/bpf/20230120200914.3008030-2-andrii@kernel.org
'.' is not allowed in the event name of kprobe. Therefore, we will get a
EINVAL if the kernel function name has a '.' in legacy kprobe attach
case, such as 'icmp_reply.constprop.0'.
In order to adapt this case, we need to replace the '.' with other char
in gen_kprobe_legacy_event_name(). And I use '_' for this propose.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20230113093427.1666466-1-imagedong@tencent.com
pr_warn calls into user-provided callback, which can clobber errno, so
`errno = saved_errno` should happen after pr_warn.
Fixes: 07453245620c ("libbpf: fix errno is overwritten after being closed.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the ensure_good_fd function, if the fcntl function succeeds but
the close function fails, ensure_good_fd returns a normal fd and
sets errno, which may cause users to misunderstand. The close
failure is not a serious problem, and the correct FD has been
handed over to the upper-layer application. Let's restore errno here.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Link: https://lore.kernel.org/r/20221223133618.10323-1-liuxin350@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When syncing with the kernel, the script generates a cover letter for
the latest changes using "git format-patch". Unless specified otherwise,
it uses a signature (as in, email footer signature) which defaults to
the Git version in use, and ends up in the commit logs. This doesn't
bring any useful information in there: let's get rid of this version
number.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Show the real problem instead of just saying "No such file or directory".
Now will print below info:
libbpf: failed to find '.BTF' ELF section in /home/changbin/work/linux/vmlinux
Error: failed to load BTF from /home/changbin/work/linux/vmlinux: No such file or directory
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221217223509.88254-2-changbin.du@gmail.com
Clang warns on 32-bit ARM on this comparision:
libbpf.c:10497:18: error: result of comparison of constant 4294967296 with expression of type 'size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (ref_ctr_off >= (1ULL << PERF_UPROBE_REF_CTR_OFFSET_BITS))
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Typecast ref_ctr_off to __u64 in the check conditional, it is false on
32bit anyways.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221219191526.296264-1-raj.khem@gmail.com
This patch allows to remove TUNNEL_KEY from the tunnel flags bitmap
when using bpf_skb_set_tunnel_key by providing a BPF_F_NO_TUNNEL_KEY
flag. On egress, the resulting tunnel header will not contain a tunnel
key if the protocol and implementation supports it.
At the moment bpf_tunnel_key wants a user to specify a numeric tunnel
key. This will wrap the inner packet into a tunnel header with the key
bit and value set accordingly. This is problematic when using a tunnel
protocol that supports optional tunnel keys and a receiving tunnel
device that is not expecting packets with the key bit set. The receiver
won't decapsulate and drop the packet.
RFC 2890 and RFC 2784 GRE tunnels are examples where this flag is
useful. It allows for generating packets, that can be decapsulated by
a GRE tunnel device not operating in collect metadata mode or not
expecting the key bit set.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221218051734.31411-1-cehrig@cloudflare.com
Fix bug in btf_dump's logic of determining if a given struct type is
packed or not. The notion of "natural alignment" is not needed and is
even harmful in this case, so drop it altogether. The biggest difference
in btf_is_struct_packed() compared to its original implementation is
that we don't really use btf__align_of() to determine overall alignment
of a struct type (because it could be 1 for both packed and non-packed
struct, depending on specifci field definitions), and just use field's
actual alignment to calculate whether any field is requiring packing or
struct's size overall necessitates packing.
Add two simple test cases that demonstrate the difference this change
would make.
Fixes: ea2ce1ba99aa ("libbpf: Fix BTF-to-C converter's padding logic")
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20221215183605.4149488-1-andrii@kernel.org
Turns out that btf_dump API doesn't handle a bunch of tricky corner
cases, as reported by Per, and further discovered using his testing
Python script ([0]).
This patch revamps btf_dump's padding logic significantly, making it
more correct and also avoiding unnecessary explicit padding, where
compiler would pad naturally. This overall topic turned out to be very
tricky and subtle, there are lots of subtle corner cases. The comments
in the code tries to give some clues, but comments themselves are
supposed to be paired with good understanding of C alignment and padding
rules. Plus some experimentation to figure out subtle things like
whether `long :0;` means that struct is now forced to be long-aligned
(no, it's not, turns out).
Anyways, Per's script, while not completely correct in some known
situations, doesn't show any obvious cases where this logic breaks, so
this is a nice improvement over the previous state of this logic.
Some selftests had to be adjusted to accommodate better use of natural
alignment rules, eliminating some unnecessary padding, or changing it to
`type: 0;` alignment markers.
Note also that for when we are in between bitfields, we emit explicit
bit size, while otherwise we use `: 0`, this feels much more natural in
practice.
Next patch will add few more test cases, found through randomized Per's
script.
[0] https://lore.kernel.org/bpf/85f83c333f5355c8ac026f835b18d15060725fcb.camel@ericsson.com/
Reported-by: Per Sundström XP <per.xp.sundstrom@ericsson.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-6-andrii@kernel.org
