This change actually defines the (initial) metadata layout
that should be used by AF_XDP userspace (xsk_tx_metadata).
The first field is flags which requests appropriate offloads,
followed by the offload-specific fields. The supported per-device
offloads are exported via netlink (new xsk-flags).
The offloads themselves are still implemented in a bit of a
framework-y fashion that's left from my initial kfunc attempt.
I'm introducing new xsk_tx_metadata_ops which drivers are
supposed to implement. The drivers are also supposed
to call xsk_tx_metadata_request/xsk_tx_metadata_complete in
the right places. Since xsk_tx_metadata_{request,_complete}
are static inline, we don't incur any extra overhead doing
indirect calls.
The benefit of this scheme is as follows:
- keeps all metadata layout parsing away from driver code
- makes it easy to grep and see which drivers implement what
- don't need any extra flags to maintain to keep track of what
offloads are implemented; if the callback is implemented - the offload
is supported (used by netlink reporting code)
Two offloads are defined right now:
1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset
2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata
area upon completion (tx_timestamp field)
XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes
SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass
metadata pointer).
The struct is forward-compatible and can be extended in the future
by appending more fields.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For zerocopy mode, tx_desc->addr can point to an arbitrary offset
and carry some TX metadata in the headroom. For copy mode, there
is no way currently to populate skb metadata.
Introduce new tx_metadata_len umem config option that indicates how many
bytes to treat as metadata. Metadata bytes come prior to tx_desc address
(same as in RX case).
The size of the metadata has mostly the same constraints as XDP:
- less than 256 bytes
- 8-byte aligned (compared to 4-byte alignment on xdp, due to 8-byte
timestamp in the completion)
- non-zero
This data is not interpreted in any way right now.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-2-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to get uprobe_link details through bpf_link_info
interface.
Adding new struct uprobe_multi to struct bpf_link_info to carry
the uprobe_multi link details.
The uprobe_multi.count is passed from user space to denote size
of array fields (offsets/ref_ctr_offsets/cookies). The actual
array size is stored back to uprobe_multi.count (allowing user
to find out the actual array size) and array fields are populated
up to the user passed size.
All the non-array fields (path/count/flags/pid) are always set.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231125193130.834322-4-jolsa@kernel.org
The vmtest action is used by several workflows: test, pahole, ondemand.
At the same time, vmtest action requires valid access rights to /dev/kvm
and is the only action that uses it.
This commit moves /dev/kvm permissions setup from test workflow to
vmtest action, in order to make sure that setup logic is shared by all
workflows that run vmtest.
Should fix CI failures like [1].
[1] https://github.com/libbpf/libbpf/actions/runs/7104762048/job/19340484589
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Without needing to modify tons of BPF selftests file, make sure we don't
pass BPF_F_TEST_REG_INVARIANTS to kernel, to make BPF selftests work on
4.9 and 5.5 kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add simple sanity checks that validate well-formed ranges (min <= max)
across u64, s64, u32, and s32 ranges. Also for cases when the value is
constant (either 64-bit or 32-bit), we validate that ranges and tnums
are in agreement.
These bounds checks are performed at the end of BPF_ALU/BPF_ALU64
operations, on conditional jumps, and for LDX instructions (where subreg
zero/sign extension is probably the most important to check). This
covers most of the interesting cases.
Also, we validate the sanity of the return register when manually
adjusting it for some special helpers.
By default, sanity violation will trigger a warning in verifier log and
resetting register bounds to "unbounded" ones. But to aid development
and debugging, BPF_F_TEST_SANITY_STRICT flag is added, which will
trigger hard failure of verification with -EFAULT on register bounds
violations. This allows selftests to catch such issues. veristat will
also gain a CLI option to enable this behavior.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231112010609.848406-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently get_perf_callchain only supports user stack walking for
the current task. Passing the correct *crosstask* param will return
0 frames if the task passed to __bpf_get_stack isn't the current
one instead of a single incorrect frame/address. This change
passes the correct *crosstask* param but also does a preemptive
check in __bpf_get_stack if the task is current and returns
-EOPNOTSUPP if it is not.
This issue was found using bpf_get_task_stack inside a BPF
iterator ("iter/task"), which iterates over all tasks.
bpf_get_task_stack works fine for fetching kernel stacks
but because get_perf_callchain relies on the caller to know
if the requested *task* is the current one (via *crosstask*)
it was failing in a confusing way.
It might be possible to get user stacks for all tasks utilizing
something like access_process_vm but that requires the bpf
program calling bpf_get_task_stack to be sleepable and would
therefore be a breaking change.
Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Jordan Rome <jordalgo@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com
The following 'sockopt' selftests fail on libbpf CI for kernel 5.5:
- sockopt/getsockopt: read ctx->optlen:FAIL
- sockopt/getsockopt: support smaller ctx->optlen:FAIL
- sockopt/setsockopt: read ctx->level:FAIL
- sockopt/setsockopt: read ctx->optname:FAIL
- sockopt/setsockopt: read ctx->optlen:FAIL
- sockopt/setsockopt: ctx->optlen == -1 is ok:FAIL
Examples of failing CI runs:
- https://github.com/libbpf/libbpf/actions/runs/6961182067
- https://github.com/libbpf/libbpf/actions/runs/6961088131
The failures are strange as all tests were added quite a while ago
(Jun 27 2019) by commit:
9ec8a4c9489d ("selftests/bpf: add sockopt test")
But seem to be unrelated to libbpf.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
All tests disabled in this commit pass on main kernel CI and fail or
flip/flop on libbpf CI. Failures do not seem to be related to libbpf.
It appears that common theme for all failing tests is that hardware
perf events are not delivered as expected on github CI worker
machines.
Examples of failed CI runs:
- https://github.com/libbpf/libbpf/actions/runs/6961182067
- https://github.com/libbpf/libbpf/actions/runs/6961088131
Fails with the following log:
test_send_signal_common:FAIL:incorrect result \
unexpected incorrect result: actual 48 != expected 50
Test mode of operation:
- fork'
- child:
- install handler for SIGUSR1;
- send ready message to parent;
- wait for SIGUSR1 in busy loop;
- send message '2' (50) to parent if SIGUSR1 occured;
- send message '0' (48) to parent if no SIGUSR1 occured.
- parent:
- wait for ready message from child;
- install perf_event or tracepoint bpf program that uses
bpf_send_signal() to send SIGUSR1;
- wait for message '0' or '2' from child, '2' is expected for test
success.
It appears that perf event that should be triggered by parent never
happens, thus message 48 is received by parent and test fails.
Fails with the following log:
test_and_reset_skel:FAIL:found_vm_exec \
unexpected found_vm_exec: actual 0 != expected 1
Such log is printed if variables set from BPF program are not set
after some timeout. The program that should set the variable is
SEC("perf_event") int handle_pe(void), it appears that it is never run.
Fails with the following log:
pe_subtest:FAIL:pe_res1 unexpected pe_res1: actual 0 != expected 1048576
Variable pe_res1 should be triggered by program
SEC("perf_event") int handle_pe(struct pt_regs *ctx),
it appears that it is never run.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
s390 tests are executed on selfhosted runner using root user,
avoid setting /dev/kvm permissions in such case.
This should fix CI failures like [0].
(Still necessary for x86 tests executed on standard github runners).
[0] https://github.com/libbpf/libbpf/actions/runs/6898545987/job/18768732980?pr=752
Fixes: 168630f852 ("ci: give /dev/kvm 0666 permissions inside CI runner")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Recent kernel commit [0] changed selftests config snippets structure
by extracting VM specific options to the file 'config.vm'. This file
has to be used in .github/actions/vmtest/action.yml at step
'Prepare to build BPF selftests', otherwise drivers necessary for e.g.
root file system access are not compiled into the kernel, leading to
CI failures like [1].
[0] b0cf0dcde8ca ("selftests/bpf: Consolidate VIRTIO/9P configs in config.vm file")
[1] https://github.com/libbpf/libbpf/actions/runs/6830439839/job/18578379328?pr=747
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Apply fe69a1b1b6ed ("selftests: bpf: xskxceiver: ksft_print_msg: fix
format type error") to make bpf-next build.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Starting recently libbpf CI runs started failing with the following
error:
##[group]vm_init - Starting virtual machine...
Starting VM with 4 CPUs...
INFO: /dev/kvm exists
KVM acceleration can be used
Could not access KVM kernel module: Permission denied
qemu-system-x86_64: failed to initialize KVM: Permission denied
##[error]Process completed with exit code 2.
E.g. see here [0]. The error happens because CI user has not enough
rights to access /dev/kvm. On a regular machine the solution would be
to add user to group 'kvm', however that would require a re-login,
which is cumbersome to achieve in CI setting.
Instead, use a recipe described in [1] to make udev set 0666 access
permissions for /dev/kvm.
[0] https://github.com/libbpf/libbpf/actions/runs/6819530119/job/18547589967?pr=746
[1] https://stackoverflow.com/questions/37300811/android-studio-dev-kvm-device-permission-denied/61984745#61984745
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Martin and Vadim reported a verifier failure with bpf_dynptr usage.
The issue is mentioned but Vadim workarounded the issue with source
change ([1]). The below describes what is the issue and why there
is a verification failure.
int BPF_PROG(skb_crypto_setup) {
struct bpf_dynptr algo, key;
...
bpf_dynptr_from_mem(..., ..., 0, &algo);
...
}
The bpf program is using vmlinux.h, so we have the following definition in
vmlinux.h:
struct bpf_dynptr {
long: 64;
long: 64;
};
Note that in uapi header bpf.h, we have
struct bpf_dynptr {
long: 64;
long: 64;
} __attribute__((aligned(8)));
So we lost alignment information for struct bpf_dynptr by using vmlinux.h.
Let us take a look at a simple program below:
$ cat align.c
typedef unsigned long long __u64;
struct bpf_dynptr_no_align {
__u64 :64;
__u64 :64;
};
struct bpf_dynptr_yes_align {
__u64 :64;
__u64 :64;
} __attribute__((aligned(8)));
void bar(void *, void *);
int foo() {
struct bpf_dynptr_no_align a;
struct bpf_dynptr_yes_align b;
bar(&a, &b);
return 0;
}
$ clang --target=bpf -O2 -S -emit-llvm align.c
Look at the generated IR file align.ll:
...
%a = alloca %struct.bpf_dynptr_no_align, align 1
%b = alloca %struct.bpf_dynptr_yes_align, align 8
...
The compiler dictates the alignment for struct bpf_dynptr_no_align is 1 and
the alignment for struct bpf_dynptr_yes_align is 8. So theoretically compiler
could allocate variable %a with alignment 1 although in reallity the compiler
may choose a different alignment by considering other local variables.
In [1], the verification failure happens because variable 'algo' is allocated
on the stack with alignment 4 (fp-28). But the verifer wants its alignment
to be 8.
To fix the issue, the RFC patch ([1]) tried to add '__attribute__((aligned(8)))'
to struct bpf_dynptr plus other similar structs. Andrii suggested that
we could directly modify uapi struct with named fields like struct 'bpf_iter_num':
struct bpf_iter_num {
/* opaque iterator state; having __u64 here allows to preserve correct
* alignment requirements in vmlinux.h, generated from BTF
*/
__u64 __opaque[1];
} __attribute__((aligned(8)));
Indeed, adding named fields for those affected structs in this patch can preserve
alignment when bpf program references them in vmlinux.h. With this patch,
the verification failure in [1] can also be resolved.
[1] https://lore.kernel.org/bpf/1b100f73-7625-4c1f-3ae5-50ecf84d3ff0@linux.dev/
[2] https://lore.kernel.org/bpf/20231103055218.2395034-1-yonghong.song@linux.dev/
Cc: Vadim Fedorenko <vadfed@meta.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231104024900.1539182-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds bpf_program__attach_netkit() API to libbpf. Overall it is very
similar to tcx. The API looks as following:
LIBBPF_API struct bpf_link *
bpf_program__attach_netkit(const struct bpf_program *prog, int ifindex,
const struct bpf_netkit_opts *opts);
The struct bpf_netkit_opts is done in similar way as struct bpf_tcx_opts
for supporting bpf_mprog control parameters. The attach location for the
primary and peer device is derived from the program section "netkit/primary"
and "netkit/peer", respectively.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.
One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).
In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.
Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f235d ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.
Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.
An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/20231024214904.29825-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Fix too eager assumption that SHT_GNU_verdef ELF section is going to be
present whenever binary has SHT_GNU_versym section. It seems like either
SHT_GNU_verdef or SHT_GNU_verneed can be used, so failing on missing
SHT_GNU_verdef actually breaks use cases in production.
One specific reported issue, which was used to manually test this fix,
was trying to attach to `readline` function in BASH binary.
Fixes: bb7fa09399b9 ("libbpf: Support symbol versioning for uprobe")
Reported-by: Liam Wisehart <liamwisehart@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Manu Bretelle <chantr4@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20231016182840.4033346-1-andrii@kernel.org
These hooks allows intercepting connect(), getsockname(),
getpeername(), sendmsg() and recvmsg() for unix sockets. The unix
socket hooks get write access to the address length because the
address length is not fixed when dealing with unix sockets and
needs to be modified when a unix socket address is modified by
the hook. Because abstract socket unix addresses start with a
NUL byte, we cannot recalculate the socket address in kernelspace
after running the hook by calculating the length of the unix socket
path using strlen().
These hooks can be used when users want to multiplex syscall to a
single unix socket to multiple different processes behind the scenes
by redirecting the connect() and other syscalls to process specific
sockets.
We do not implement support for intercepting bind() because when
using bind() with unix sockets with a pathname address, this creates
an inode in the filesystem which must be cleaned up. If we rewrite
the address, the user might try to clean up the wrong file, leaking
the socket in the filesystem where it is never cleaned up. Until we
figure out a solution for this (and a use case for intercepting bind()),
we opt to not allow rewriting the sockaddr in bind() calls.
We also implement recvmsg() support for connected streams so that
after a connect() that is modified by a sockaddr hook, any corresponding
recmvsg() on the connected socket can also be modified to make the
connected program think it is connected to the "intended" remote.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-5-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
BPF supports creating high resolution timers using bpf_timer_* helper
functions. Currently, only the BPF_F_TIMER_ABS flag is supported, which
specifies that the timeout should be interpreted as absolute time. It
would also be useful to be able to pin that timer to a core. For
example, if you wanted to make a subset of cores run without timer
interrupts, and only have the timer be invoked on a single core.
This patch adds support for this with a new BPF_F_TIMER_CPU_PIN flag.
When specified, the HRTIMER_MODE_PINNED flag is passed to
hrtimer_start(). A subsequent patch will update selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20231004162339.200702-2-void@manifault.com
The previous sync bpf-checkpoint-commit becomes invalid
due to upstream bpf tree force-push. This patch picked
a new valid commit as the bpf-checkpoint-commit so
the sync script can work with newer changes.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Without the change, we will have failures like below:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h' differs from latest version at 'include/uapi/linux/if_xdp.h'
progs/getsockname_unix_prog.c:27:15: error: no member named 'uaddrlen' in 'struct bpf_sock_addr_kern'
if (sa_kern->uaddrlen != unaddrlen)
~~~~~~~ ^
1 error generated.
make: *** [Makefile:605: /home/runner/work/libbpf/libbpf/.kernel/tools/testing/selftests/bpf/getsockname_unix_prog.bpf.o] Error 1
make: *** Waiting for unfinished jobs....
Error: Process completed with exit code 2.
in Kernel 5.5.0 on ubuntu-20.04 + selftests
Manu Bretelle kindly helped regenerate the vmlinux.h from latest
bpf-next kernel for me.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Golang symbols in ELF files are different from C/C++
which contains special characters like '*', '(' and ')'.
With generics, things get more complicated, there are
symbols like:
github.com/cilium/ebpf/internal.(*Deque[go.shape.interface { Format(fmt.State, int32); TypeName() string;github.com/cilium/ebpf/btf.copy() github.com/cilium/ebpf/btf.Type}]).Grow
Matching such symbols using `%m[^\n]` in sscanf, this
excludes newline which typically does not appear in ELF
symbols. This should work in most use-cases and also
work for unicode letters in identifiers. If newline do
show up in ELF symbols, users can still attach to such
symbol by specifying bpf_uprobe_opts::func_name.
A working example can be found at this repo ([0]).
[0]: https://github.com/chenhengqi/libbpf-go-symbols
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230929155954.92448-1-hengqi.chen@gmail.com
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
