Don't reset recorded sec_def handler unconditionally on
bpf_program__set_type(). There are two situations where this is wrong.
First, if the program type didn't actually change. In that case original
SEC handler should work just fine.
Second, catch-all custom SEC handler is supposed to work with any BPF
program type and SEC() annotation, so it also doesn't make sense to
reset that.
This patch fixes both issues. This was reported recently in the context
of breaking perf tool, which uses custom catch-all handler for fancy BPF
prologue generation logic. This patch should fix the issue.
[0] https://lore.kernel.org/linux-perf-users/ab865e6d-06c5-078e-e404-7f90686db50d@amd.com/
Fixes: d6e6286a12e7 ("libbpf: disassociate section handler on explicit bpf_program__set_type() call")
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230707231156.1711948-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko writes:
And we currently don't have an attach type for NETLINK BPF link.
Thankfully it's not too late to add it. I see that link_create() in
kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't
have done that. Instead we need to add BPF_NETLINK attach type to enum
bpf_attach_type. And wire all that properly throughout the kernel and
libbpf itself.
This adds BPF_NETFILTER and uses it. This breaks uabi but this
wasn't in any non-rc release yet, so it should be fine.
v2: check link_attack prog type in link_create too
Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzZ69YgrQW7DHCJUT_X+GqMq_ZQQPBwopaJJVGFD5=d5Vg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230605131445.32016-1-fw@strlen.de
Add ability to specify routing table ID to the `bpf_fib_lookup` BPF
helper.
A new field `tbid` is added to `struct bpf_fib_lookup` used as
parameters to the `bpf_fib_lookup` BPF helper.
When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and
`BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup`
will be used as the table ID for the fib lookup.
If the `tbid` does not exist the fib lookup will fail with
`BPF_FIB_LKUP_RET_NOT_FWDED`.
The `tbid` field becomes a union over the vlan related output fields
in `struct bpf_fib_lookup` and will be zeroed immediately after usage.
This functionality is useful in containerized environments.
For instance, if a CNI wants to dictate the next-hop for traffic leaving
a container it can create a container-specific routing table and perform
a fib lookup against this table in a "host-net-namespace-side" TC program.
This functionality also allows `ip rule` like functionality at the TC
layer, allowing an eBPF program to pick a routing table based on some
aspect of the sk_buff.
As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN
datapath.
When egress traffic leaves a Pod an eBPF program attached by Cilium will
determine which VRF the egress traffic should target, and then perform a
FIB lookup in a specific table representing this VRF's FIB.
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com
Make sure that libbpf code always gets FD with O_CLOEXEC flag set,
regardless if file is open through open() or fopen(). For the latter
this means to add "e" to mode string, which is supported since pretty
ancient glibc v2.7.
Also drop the outdated TODO comment in usdt.c, which was already completed.
Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-1-andrii@kernel.org
Cherry pick of pieces of f909f8bf110d ("ci: temporarily disable
test_btf_dump_case") from vmtest to handle spaces in test names
properly.
Signed-off-by: Daniel Müller <deso@posteo.net>
This patch updates bpf_map__set_value_size() so that if the given map is
memory mapped, it will attempt to resize the mapped region. Initial
contents of the mapped region are preserved. BTF is not required, but
after the mapping is resized an attempt is made to adjust the associated
BTF information if the following criteria is met:
- BTF info is present
- the map is a datasec
- the final variable in the datasec is an array
... the resulting BTF info will be updated so that the final array
variable is associated with a new BTF array type sized to cover the
requested size.
Note that the initial resizing of the memory mapped region can succeed
while the subsequent BTF adjustment can fail. In this case, BTF info is
dropped from the map by clearing the key and value type.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230524004537.18614-2-inwardvessel@gmail.com
Signed-off-by: Daniel Müller <deso@posteo.net>
Current UAPI of BPF_OBJ_PIN and BPF_OBJ_GET commands of bpf() syscall
forces users to specify pinning location as a string-based absolute or
relative (to current working directory) path. This has various
implications related to security (e.g., symlink-based attacks), forces
BPF FS to be exposed in the file system, which can cause races with
other applications.
One of the feedbacks we got from folks working with containers heavily
was that inability to use purely FD-based location specification was an
unfortunate limitation and hindrance for BPF_OBJ_PIN and BPF_OBJ_GET
commands. This patch closes this oversight, adding path_fd field to
BPF_OBJ_PIN and BPF_OBJ_GET UAPI, following conventions established by
*at() syscalls for dirfd + pathname combinations.
This now allows interesting possibilities like working with detached BPF
FS mount (e.g., to perform multiple pinnings without running a risk of
someone interfering with them), and generally making pinning/getting
more secure and not prone to any races and/or security attacks.
This is demonstrated by a selftest added in subsequent patch that takes
advantage of new mount APIs (fsopen, fsconfig, fsmount) to demonstrate
creating detached BPF FS mount, pinning, and then getting BPF map out of
it, all while never exposing this private instance of BPF FS to outside
worlds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
Signed-off-by: Daniel Müller <deso@posteo.net>
When moving some of the test kfuncs to bpf_testmod I hit an issue
when some of the kfuncs that object uses are in module and some
in vmlinux.
The problem is that both vmlinux and module kfuncs get allocated
btf_fd_idx index into fd_array, but we store to it the BTF fd value
only for module's kfunc, not vmlinux's one because (it's zero).
Then after the program is loaded we check if fd_array[btf_fd_idx] != 0
and close the fd.
When the object has kfuncs from both vmlinux and module, the fd from
fd_array[btf_fd_idx] from previous load will be stored in there for
vmlinux's kfunc, so we close unrelated fd (of the program we just
loaded in my case).
Fixing this by storing zero to fd_array[btf_fd_idx] for vmlinux
kfuncs, so the we won't close stale fd.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
It seems like __builtin_offset() doesn't preserve CO-RE field
relocations properly. So if offsetof() macro is defined through
__builtin_offset(), CO-RE-enabled BPF code using container_of() will be
subtly and silently broken.
To avoid this problem, redefine offsetof() and container_of() in the
form that works with CO-RE relocations more reliably.
Fixes: 5fbc220862fc ("tools/libpf: Add offsetof/container_of macro in bpf_helpers.h")
Reported-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230509065502.2306180-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
The btf_dump/struct_data selftest is failing with:
[...]
test_btf_dump_struct_data:FAIL:unexpected return value dumping fs_context unexpected unexpected return value dumping fs_context: actual -7 != expected 264
[...]
The reason is in btf_dump_type_data_check_overflow(). It does not use
BTF_MEMBER_BITFIELD_SIZE from the struct's member (btf_member). Instead,
it is using the enum size which is 4. It had been working till the recent
commit 4e04143c869c ("fs_context: drop the unused lsm_flags member")
removed an integer member which also removed the 4 bytes padding at the
end of the fs_context. Missing this 4 bytes padding exposed this bug. In
particular, when btf_dump_type_data_check_overflow() reaches the member
'phase', -E2BIG is returned.
The fix is to pass bit_sz to btf_dump_type_data_check_overflow(). In
btf_dump_type_data_check_overflow(), it does a different size check when
bit_sz is not zero.
The current fs_context:
[3600] ENUM 'fs_context_purpose' encoding=UNSIGNED size=4 vlen=3
'FS_CONTEXT_FOR_MOUNT' val=0
'FS_CONTEXT_FOR_SUBMOUNT' val=1
'FS_CONTEXT_FOR_RECONFIGURE' val=2
[3601] ENUM 'fs_context_phase' encoding=UNSIGNED size=4 vlen=7
'FS_CONTEXT_CREATE_PARAMS' val=0
'FS_CONTEXT_CREATING' val=1
'FS_CONTEXT_AWAITING_MOUNT' val=2
'FS_CONTEXT_AWAITING_RECONF' val=3
'FS_CONTEXT_RECONF_PARAMS' val=4
'FS_CONTEXT_RECONFIGURING' val=5
'FS_CONTEXT_FAILED' val=6
[3602] STRUCT 'fs_context' size=264 vlen=21
'ops' type_id=3603 bits_offset=0
'uapi_mutex' type_id=235 bits_offset=64
'fs_type' type_id=872 bits_offset=1216
'fs_private' type_id=21 bits_offset=1280
'sget_key' type_id=21 bits_offset=1344
'root' type_id=781 bits_offset=1408
'user_ns' type_id=251 bits_offset=1472
'net_ns' type_id=984 bits_offset=1536
'cred' type_id=1785 bits_offset=1600
'log' type_id=3621 bits_offset=1664
'source' type_id=42 bits_offset=1792
'security' type_id=21 bits_offset=1856
's_fs_info' type_id=21 bits_offset=1920
'sb_flags' type_id=20 bits_offset=1984
'sb_flags_mask' type_id=20 bits_offset=2016
's_iflags' type_id=20 bits_offset=2048
'purpose' type_id=3600 bits_offset=2080 bitfield_size=8
'phase' type_id=3601 bits_offset=2088 bitfield_size=8
'need_free' type_id=67 bits_offset=2096 bitfield_size=1
'global' type_id=67 bits_offset=2097 bitfield_size=1
'oldapi' type_id=67 bits_offset=2098 bitfield_size=1
Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230428013638.1581263-1-martin.lau@linux.dev
Signed-off-by: Daniel Müller <deso@posteo.net>
The elfutils project has fixed several issues found by fuzz targets so it
should help to prevent the libbpf fuzz target from running into them.
Signed-off-by: Evgeny Vereshchagin <evvers@ya.ru>
Fix test_progs failure xdp_bonding/xdp_bonding_redirect_multi with a
missing commit (in bpf, but not in bpf-next yet).
Signed-off-by: Song Liu <song@kernel.org>
Mark bpf_iter_num_{new,next,destroy}() kfuncs declared for
bpf_for()/bpf_repeat() macros as __weak to allow users to feature-detect
their presence and guard bpf_for()/bpf_repeat() loops accordingly for
backwards compatibility with old kernels.
Now that libbpf supports kfunc calls poisoning and better reporting of
unresolved (but called) kfuncs, declaring number iterator kfuncs in
bpf_helpers.h won't degrade user experience and won't cause unnecessary
kernel feature dependencies.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230418002148.3255690-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To make it easier for bleeding-edge BPF applications, such as sched_ext,
to utilize open-coded iterators, move bpf_for(), bpf_for_each(), and
bpf_repeat() macros from selftests/bpf-internal bpf_misc.h helper, to
libbpf-provided bpf_helpers.h header.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230418002148.3255690-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, libbpf leaves `call #0` instruction for __weak unresolved
kfuncs, which might lead to a confusing verifier log situations, where
invalid `call #0` will be treated as successfully validated.
We can do better. Libbpf already has an established mechanism of
poisoning instructions that failed some form of resolution (e.g., CO-RE
relocation and BPF map set to not be auto-created). Libbpf doesn't fail
them outright to allow users to guard them through other means, and as
long as BPF verifier can prove that such poisoned instructions cannot be
ever reached, this doesn't consistute an invalid BPF program. If user
didn't guard such code, libbpf will extract few pieces of information to
tie such poisoned instructions back to additional information about what
entitity wasn't resolved (e.g., BPF map name, or CO-RE relocation
information).
__weak unresolved kfuncs fit this model well, so this patch extends
libbpf with poisioning and log fixup logic for kfunc calls.
Note, this poisoning is done only for kfunc *calls*, not kfunc address
resolution (ldimm64 instructions). The former cannot be ever valid, if
reached, so it's safe to poison them. The latter is a valid mechanism to
check if __weak kfunc ksym was resolved, and do necessary guarding and
work arounds based on this result, supported in most recent kernels. As
such, libbpf keeps such ldimm64 instructions as loading zero, never
poisoning them.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230418002148.3255690-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently libbpf always reports "kernel" as a source of ksym BTF type,
which is ambiguous given ksym's BTF can come from either vmlinux or
kernel module BTFs. Make this explicit and log module name, if used BTF
is from kernel module.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230418002148.3255690-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Normalize internal constants, field names, and comments related to log
fixup. Also add explicit `ext_idx` alias for relocation where relocation
is pointing to extern description for additional information.
No functional changes, just a clean up before subsequent additions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230418002148.3255690-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A 'struct bpf_refcount' is added to the set of opaque uapi/bpf.h types
meant for use in BPF programs. Similarly to other opaque types like
bpf_spin_lock and bpf_rbtree_node, the verifier needs to know where in
user-defined struct types a bpf_refcount can be located, so necessary
btf_record plumbing is added to enable this. bpf_refcount is sized to
hold a refcount_t.
Similarly to bpf_spin_lock, the offset of a bpf_refcount is cached in
btf_record as refcount_off in addition to being in the field array.
Caching refcount_off makes sense for this field because further patches
in the series will modify functions that take local kptrs (e.g.
bpf_obj_drop) to change their behavior if the type they're operating on
is refcounted. So enabling fast "is this type refcounted?" checks is
desirable.
No such verifier behavior changes are introduced in this patch, just
logic to recognize 'struct bpf_refcount' in btf_record.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add output-only log_true_size field to bpf_prog_load_opts to return
bpf_attr->log_true_size value back from bpf() syscall.
Note, that we have to drop const modifier from opts in bpf_prog_load().
This could potentially cause compilation error for some users. But
the usual practice is to define bpf_prog_load_ops
as a local variable next to bpf_prog_load() call and pass pointer to it,
so const vs non-const makes no difference and won't even come up in most
(if not all) cases.
There are no runtime and ABI backwards/forward compatibility issues at all.
If user provides old struct bpf_prog_load_opts, libbpf won't set new
fields. If old libbpf is provided new bpf_prog_load_opts, nothing will
happen either as old libbpf doesn't yet know about this new field.
Adding a new variant of bpf_prog_load() just for this seems like a big
and unnecessary overkill. As a corroborating evidence is the fact that
entire selftests/bpf code base required not adjustment whatsoever.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230406234205.323208-16-andrii@kernel.org
Add output-only log_true_size and btf_log_true_size field to
BPF_PROG_LOAD and BPF_BTF_LOAD commands, respectively. It will return
the size of log buffer necessary to fit in all the log contents at
specified log_level. This is very useful for BPF loader libraries like
libbpf to be able to size log buffer correctly, but could be used by
users directly, if necessary, as well.
This patch plumbs all this through the code, taking into account actual
bpf_attr size provided by user to determine if these new fields are
expected by users. And if they are, set them from kernel on return.
We refactory btf_parse() function to accommodate this, moving attr and
uattr handling inside it. The rest is very straightforward code, which
is split from the logging accounting changes in the previous patch to
make it simpler to review logic vs UAPI changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-13-andrii@kernel.org
Make the broadcast cutoff configurable through netlink. Note
that macvlan is weird because there is no central device for
us to configure (the lowerdev could be anything). So all the
options are duplicated over what could be thousands of child
devices.
IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum
of all child device settings. This is unnecessary as we could
simply store the option in the port device and take the last
child device that gets updated as the value to use.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need to archive assets/ subdir when packaging libbpf sources in
retsnoop and veristat repos. Mark assets/ as export-ignore to skip it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Introduce xdp_set_features_flag utility routine in order to update
dynamically xdp_features according to the dynamic hw configuration via
ethtool (e.g. changing number of hw rx/tx queues).
Add xdp_clear_features_flag() in order to clear all xdp_feature flag.
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
To pick up the changes in:
6fd7353829cafc40 ("mm/memfd: add F_SEAL_EXEC")
That doesn't add or change any perf tools functionality, only addresses
these build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fcntl.h' differs from latest version at 'include/uapi/linux/fcntl.h'
diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Müller <deso@posteo.net>
If user explicitly overrides programs's type with
bpf_program__set_type() API call, we need to disassociate whatever
SEC_DEF handler libbpf determined initially based on program's SEC()
definition, as it's not goind to be valid anymore and could lead to
crashes and/or confusing failures.
Also, fix up bpf_prog_test_load() helper in selftests/bpf, which is
force-setting program type (even if that's completely unnecessary; this
is quite a legacy piece of code), and thus should expect auto-attach to
not work, yet one of the tests explicitly relies on auto-attach for
testing.
Instead, force-set program type only if it differs from the desired one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230327185202.1929145-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Double-free error in bpf_linker__free() was reported by James Hilliard.
The error is caused by miss-use of realloc() in extend_sec().
The error occurs when two files with empty sections of the same name
are linked:
- when first file is processed:
- extend_sec() calls realloc(dst->raw_data, dst_align_sz)
with dst->raw_data == NULL and dst_align_sz == 0;
- dst->raw_data is set to a special pointer to a memory block of
size zero;
- when second file is processed:
- extend_sec() calls realloc(dst->raw_data, dst_align_sz)
with dst->raw_data == <special pointer> and dst_align_sz == 0;
- realloc() "frees" dst->raw_data special pointer and returns NULL;
- extend_sec() exits with -ENOMEM, and the old dst->raw_data value
is preserved (it is now invalid);
- eventually, bpf_linker__free() attempts to free dst->raw_data again.
This patch fixes the bug by avoiding -ENOMEM exit for dst_align_sz == 0.
The fix was suggested by Andrii Nakryiko <andrii.nakryiko@gmail.com>.
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/bpf/CADvTj4o7ZWUikKwNTwFq0O_AaX+46t_+Ca9gvWMYdWdRtTGeHQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230328004738.381898-3-eddyz87@gmail.com
Signed-off-by: Daniel Müller <deso@posteo.net>
Seems like deafult branch was renamed s/master/main/, adopt libbpf CI to
not fail.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Seems like upstream LLVM/Clang packaging still has issues with
llvm/clang 17. Fallback to 16 again, for now.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
By improving the BPF_LINK_UPDATE command of bpf(), it should allow you
to conveniently switch between different struct_ops on a single
bpf_link. This would enable smoother transitions from one struct_ops
to another.
The struct_ops maps passing along with BPF_LINK_UPDATE should have the
BPF_F_LINK flag.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230323032405.3735486-6-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
bpf_map__attach_struct_ops() was creating a dummy bpf_link as a
placeholder, but now it is constructing an authentic one by calling
bpf_link_create() if the map has the BPF_F_LINK flag.
You can flag a struct_ops map with BPF_F_LINK by calling
bpf_map__set_map_flags().
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230323032405.3735486-5-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Make bpf_link support struct_ops. Previously, struct_ops were always
used alone without any associated links. Upon updating its value, a
struct_ops would be activated automatically. Yet other BPF program
types required to make a bpf_link with their instances before they
could become active. Now, however, you can create an inactive
struct_ops, and create a link to activate it later.
With bpf_links, struct_ops has a behavior similar to other BPF program
types. You can pin/unpin them from their links and the struct_ops will
be deactivated when its link is removed while previously need someone
to delete the value for it to be deactivated.
bpf_links are responsible for registering their associated
struct_ops. You can only use a struct_ops that has the BPF_F_LINK flag
set to create a bpf_link, while a structs without this flag behaves in
the same manner as before and is registered upon updating its value.
The BPF_LINK_TYPE_STRUCT_OPS serves a dual purpose. Not only is it
used to craft the links for BPF struct_ops programs, but also to
create links for BPF struct_ops them-self. Since the links of BPF
struct_ops programs are only used to create trampolines internally,
they are never seen in other contexts. Thus, they can be reused for
struct_ops themself.
To maintain a reference to the map supporting this link, we add
bpf_struct_ops_link as an additional type. The pointer of the map is
RCU and won't be necessary until later in the patchset.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230323032405.3735486-4-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Write data to fd by calling "vdprintf", in most implementations
of the standard library, the data is finally written by the writev syscall.
But "uprobe_events/kprobe_events" does not allow segmented writes,
so switch the "append_to_file" function to explicit write() call.
Signed-off-by: Liu Pan <patteliu@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230320030720.650-1-patteliu@gmail.com
Unlike normal libbpf the light skeleton 'loader' program is doing
btf_find_by_name_kind() call at run-time to find ksym in the kernel and
populate its {btf_id, btf_obj_fd} pair in ld_imm64 insn. To avoid doing the
search multiple times for the same ksym it remembers the first patched ld_imm64
insn and copies {btf_id, btf_obj_fd} from it into subsequent ld_imm64 insn.
Fix a bug in copying logic, since it may incorrectly clear BPF_PSEUDO_BTF_ID flag.
Also replace always true if (btf_obj_fd >= 0) check with unconditional JMP_JA
to clarify the code.
Fixes: d995816b77eb ("libbpf: Avoid reload of imm for weak, unresolved, repeating ksym")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230319203014.55866-1-alexei.starovoitov@gmail.com
void *p = kfunc; -> generates ld_imm64 insn.
kfunc() -> generates bpf_call insn.
libbpf patches bpf_call insn correctly while only btf_id part of ld_imm64 is
set in the former case. Which means that pointers to kfuncs in modules are not
patched correctly and the verifier rejects load of such programs due to btf_id
being out of range. Fix libbpf to patch ld_imm64 for kfunc.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230317201920.62030-3-alexei.starovoitov@gmail.com
This reverts commit 6d0c4b11e743("libbpf: Poison strlcpy()").
It added the pragma poison directive to libbpf_internal.h to protect
against accidental usage of strlcpy but ended up breaking the build for
toolchains based on libcs which provide the strlcpy() declaration from
string.h (e.g. uClibc-ng). The include order which causes the issue is:
string.h,
from Iibbpf_common.h:12,
from libbpf.h:20,
from libbpf_internal.h:26,
from strset.c:9:
Fixes: 6d0c4b11e743 ("libbpf: Poison strlcpy()")
Signed-off-by: Jesus Sanchez-Palencia <jesussanp@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230309004836.2808610-1-jesussanp@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and samples in the bpf code still refer to this older
debugfs path, so let's update them to avoid confusion. There are a few
spots where the bpf code explicitly checks both tracefs and debugfs
(tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
those alone so that the tools can continue to work with both paths.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230313205628.1058720-2-zwisler@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement the first open-coded iterator type over a range of integers.
It's public API consists of:
- bpf_iter_num_new() constructor, which accepts [start, end) range
(that is, start is inclusive, end is exclusive).
- bpf_iter_num_next() which will keep returning read-only pointer to int
until the range is exhausted, at which point NULL will be returned.
If bpf_iter_num_next() is kept calling after this, NULL will be
persistently returned.
- bpf_iter_num_destroy() destructor, which needs to be called at some
point to clean up iterator state. BPF verifier enforces that iterator
destructor is called at some point before BPF program exits.
Note that `start = end = X` is a valid combination to setup an empty
iterator. bpf_iter_num_new() will return 0 (success) for any such
combination.
If bpf_iter_num_new() detects invalid combination of input arguments, it
returns error, resets iterator state to, effectively, empty iterator, so
any subsequent call to bpf_iter_num_next() will keep returning NULL.
BPF verifier has no knowledge that returned integers are in the
[start, end) value range, as both `start` and `end` are not statically
known and enforced: they are runtime values.
While the implementation is pretty trivial, some care needs to be taken
to avoid overflows and underflows. Subsequent selftests will validate
correctness of [start, end) semantics, especially around extremes
(INT_MIN and INT_MAX).
Similarly to bpf_loop(), we enforce that no more than BPF_MAX_LOOPS can
be specified.
bpf_iter_num_{new,next,destroy}() is a logical evolution from bounded
BPF loops and bpf_loop() helper and is the basis for implementing
ergonomic BPF loops with no statically known or verified bounds.
Subsequent patches implement bpf_for() macro, demonstrating how this can
be wrapped into something that works and feels like a normal for() loop
in C language.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Parsing of USDT arguments is architecture-specific; on arm it is
relatively easy since registers used are r[0-10], fp, ip, sp, lr,
pc. Format is slightly different compared to aarch64; forms are
- "size @ [ reg, #offset ]" for dereferences, for example
"-8 @ [ sp, #76 ]" ; " -4 @ [ sp ]"
- "size @ reg" for register values; for example
"-4@r0"
- "size @ #value" for raw values; for example
"-8@#1"
Add support for parsing USDT arguments for ARM architecture.
To test the above changes QEMU's virt[1] board with cortex-a15
CPU was used. libbpf-bootstrap's usdt example[2] was modified to attach
to a test program with DTRACE_PROBE1/2/3/4... probes to test different
combinations.
[1] https://www.qemu.org/docs/master/system/arm/virt.html
[2] https://github.com/libbpf/libbpf-bootstrap/blob/master/examples/c/usdt.bpf.c
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230307120440.25941-3-puranjay12@gmail.com
The parse_usdt_arg() function is defined differently for each
architecture but the last part of the function is repeated
verbatim for each architecture.
Refactor parse_usdt_arg() to fill the arg_sz and then do the repeated
post-processing in parse_usdt_spec().
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230307120440.25941-2-puranjay12@gmail.com
Coverity reported a potential underflow of the offset variable used in
the find_cd() function. Switch to using a signed 64 bit integer for the
representation of offset to make sure we can never underflow.
Fixes: 1eebcb60633f ("libbpf: Implement basic zip archive parsing support")
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230307215504.837321-1-deso@posteo.net
By default, libbpf will attach the kprobe/uprobe BPF program in the
latest mode that supported by kernel. In this patch, we add the support
to let users manually attach kprobe/uprobe in legacy or perf mode.
There are 3 mode that supported by the kernel to attach kprobe/uprobe:
LEGACY: create perf event in legacy way and don't use bpf_link
PERF: create perf event with perf_event_open() and don't use bpf_link
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Biao Jiang <benbjiang@tencent.com>
Link: create perf event with perf_event_open() and use bpf_link
Link: https://lore.kernel.org/bpf/20230113093427.1666466-1-imagedong@tencent.com/
Link: https://lore.kernel.org/bpf/20230306064833.7932-2-imagedong@tencent.com
Users now can manually choose the mode with
bpf_program__attach_uprobe_opts()/bpf_program__attach_kprobe_opts().
When performing a sync with the kernel repository using the
sync-kernel.sh script, it may be necessary to manually adjust the
library's Makefile if:
- new source files were added upstream
- new public headers were added upstream
This change adds a new section to `SYNC.md` to spell out this need.
Signed-off-by: Daniel Müller <deso@posteo.net>
The l4lb_all/l4lb_noinline_dynptr test no does not run on kernel 5.5.0,
because functionality is missing there. Do not allow running it.
Signed-off-by: Daniel Müller <deso@posteo.net>
The sync script does not seem to be automatically adding newly added
files added to the kernel repo build to the local Makefile. Do that now.
Signed-off-by: Daniel Müller <deso@posteo.net>
__kptr meant to store PTR_UNTRUSTED kernel pointers inside bpf maps.
The concept felt useful, but didn't get much traction,
since bpf_rdonly_cast() was added soon after and bpf programs received
a simpler way to access PTR_UNTRUSTED kernel pointers
without going through restrictive __kptr usage.
Rename __kptr_ref -> __kptr and __kptr -> __kptr_untrusted to indicate
its intended usage.
The main goal of __kptr_untrusted was to read/write such pointers
directly while bpf_kptr_xchg was a mechanism to access refcnted
kernel pointers. The next patch will allow RCU protected __kptr access
with direct read. At that point __kptr_untrusted will be deprecated.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230303041446.3630-2-alexei.starovoitov@gmail.com
Signed-off-by: Daniel Müller <deso@posteo.net>
This change adds support for attaching uprobes to shared objects located
in APKs, which is relevant for Android systems where various libraries
may reside in APKs. To make that happen, we extend the syntax for the
"binary path" argument to attach to with that supported by various
Android tools:
<archive>!/<binary-in-archive>
For example:
/system/app/test-app/test-app.apk!/lib/arm64-v8a/libc++_shared.so
APKs need to be specified via full path, i.e., we do not attempt to
resolve mere file names by searching system directories.
We cannot currently test this functionality end-to-end in an automated
fashion, because it relies on an Android system being present, but there
is no support for that in CI. I have tested the functionality manually,
by creating a libbpf program containing a uretprobe, attaching it to a
function inside a shared object inside an APK, and verifying the sanity
of the returned values.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-4-deso@posteo.net
This change splits the elf_find_func_offset() function in two:
elf_find_func_offset(), which now accepts an already opened Elf object
instead of a path to a file that is to be opened, as well as
elf_find_func_offset_from_file(), which opens a binary based on a
path and then invokes elf_find_func_offset() on the Elf object. Having
this split in responsibilities will allow us to call
elf_find_func_offset() from other code paths on Elf objects that did not
necessarily come from a file on disk.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-3-deso@posteo.net
This change implements support for reading zip archives, including
opening an archive, finding an entry based on its path and name in it,
and closing it.
The code was copied from https://github.com/iovisor/bcc/pull/4440, which
implements similar functionality for bcc. The author confirmed that he
is fine with this usage and the corresponding relicensing. I adjusted it
to adhere to libbpf coding standards.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Michał Gregorczyk <michalgr@meta.com>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-2-deso@posteo.net
Two new kfuncs are added, bpf_dynptr_slice and bpf_dynptr_slice_rdwr.
The user must pass in a buffer to store the contents of the data slice
if a direct pointer to the data cannot be obtained.
For skb and xdp type dynptrs, these two APIs are the only way to obtain
a data slice. However, for other types of dynptrs, there is no
difference between bpf_dynptr_slice(_rdwr) and bpf_dynptr_data.
For skb type dynptrs, the data is copied into the user provided buffer
if any of the data is not in the linear portion of the skb. For xdp type
dynptrs, the data is copied into the user provided buffer if the data is
between xdp frags.
If the skb is cloned and a call to bpf_dynptr_data_rdwr is made, then
the skb will be uncloned (see bpf_unclone_prologue()).
Please note that any bpf_dynptr_write() automatically invalidates any prior
data slices of the skb dynptr. This is because the skb may be cloned or
may need to pull its paged buffer into the head. As such, any
bpf_dynptr_write() will automatically have its prior data slices
invalidated, even if the write is to data in the skb head of an uncloned
skb. Please note as well that any other helper calls that change the
underlying packet buffer (eg bpf_skb_pull_data()) invalidates any data
slices of the skb dynptr as well, for the same reasons.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-10-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Add xdp dynptrs, which are dynptrs whose underlying pointer points
to a xdp_buff. The dynptr acts on xdp data. xdp dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of xdp->data and xdp->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For reads and writes on the dynptr, this includes reading/writing
from/to and across fragments. Data slices through the bpf_dynptr_data
API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() should be used.
For examples of how xdp dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-9-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Add skb dynptrs, which are dynptrs whose underlying pointer points
to a skb. The dynptr acts on skb data. skb dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of skb->data and skb->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For bpf prog types that don't support writes on skb data, the dynptr is
read-only (bpf_dynptr_write() will return an error)
For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write()
interfaces, reading and writing from/to data in the head as well as from/to
non-linear paged buffers is supported. Data slices through the
bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used.
For examples of how skb dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-8-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Fix a repeated copy/paste typo.
Fixes: d3d854fd6a1d ("netdev-genl: create a simple family for netdev stuff")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 04d58f1b26a4("libbpf: add API to get XDP/XSK supported features")
added feature_flags to struct bpf_xdp_query_opts. If a user uses
bpf_xdp_query_opts with feature_flags member, the bpf_xdp_query()
will check whether 'netdev' family exists or not in the kernel.
If it does not exist, the bpf_xdp_query() will return -ENOENT.
But 'netdev' family does not exist in old kernels as it is
introduced in the same patch set as Commit 04d58f1b26a4.
So old kernel with newer libbpf won't work properly with
bpf_xdp_query() api call.
To fix this issue, if the return value of
libbpf_netlink_resolve_genl_family_id() is -ENOENT, bpf_xdp_query()
will just return 0, skipping the rest of xdp feature query.
This preserves backward compatibility.
Fixes: 04d58f1b26a4 ("libbpf: add API to get XDP/XSK supported features")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230227224943.1153459-1-yhs@fb.com
The syscall register definitions for ARM in bpf_tracing.h doesn't define
the fifth parameter for the syscalls. Because of this some KPROBES based
selftests fail to compile for ARM architecture.
Define the fifth parameter that is passed in the R5 register (uregs[4]).
Fixes: 3a95c42d65d5 ("libbpf: Define arm syscall regs spec in bpf_tracing.h")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230223095346.10129-1-puranjay12@gmail.com
The bpf_fib_lookup() also looks up the neigh table.
This was done before bpf_redirect_neigh() was added.
In the use case that does not manage the neigh table
and requires bpf_fib_lookup() to lookup a fib to
decide if it needs to redirect or not, the bpf prog can
depend only on using bpf_redirect_neigh() to lookup the
neigh. It also keeps the neigh entries fresh and connected.
This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid
the double neigh lookup when the bpf prog always call
bpf_redirect_neigh() to do the neigh lookup. The params->smac
output is skipped together when SKIP_NEIGH is set because
bpf_redirect_neigh() will figure out the smac also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
This patch adds special BPF_RB_{ROOT,NODE} btf_field_types similar to
BPF_LIST_{HEAD,NODE}, adds the necessary plumbing to detect the new
types, and adds bpf_rb_root_free function for freeing bpf_rb_root in
map_values.
structs bpf_rb_root and bpf_rb_node are opaque types meant to
obscure structs rb_root_cached rb_node, respectively.
btf_struct_access will prevent BPF programs from touching these special
fields automatically now that they're recognized.
btf_check_and_fixup_fields now groups list_head and rb_root together as
"graph root" fields and {list,rb}_node as "graph node", and does same
ownership cycle checking as before. Note that this function does _not_
prevent ownership type mixups (e.g. rb_root owning list_node) - that's
handled by btf_parse_graph_root.
After this patch, a bpf program can have a struct bpf_rb_root in a
map_value, but not add anything to nor do anything useful with it.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The code assumes that everything that comes after nlmsgerr are nlattrs.
When calculating their size, it does not account for the initial
nlmsghdr. This may lead to accessing uninitialized memory.
Fixes: bbf48c18ee0c ("libbpf: add error reporting in XDP")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-8-iii@linux.ibm.com
Add option to set when the perf buffer should wake up, by default the
perf buffer becomes signaled for every event that is being pushed to it.
In case of a high throughput of events it will be more efficient to wake
up only once you have X events ready to be read.
So your application can wakeup once and drain the entire perf buffer.
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230207081916.3398417-1-arilou@gmail.com
In a previous commit, Ubuntu kernel code version is correctly set
by retrieving the information from /proc/version_signature.
commit<5b3d72987701d51bf31823b39db49d10970f5c2d>
(libbpf: Improve LINUX_VERSION_CODE detection)
The /proc/version_signature file doesn't present in at least the
older versions of Debian distributions (eg, Debian 9, 10). The Debian
kernel has a similar issue where the release information from uname()
syscall doesn't give the kernel code version that matches what the
kernel actually expects. Below is an example content from Debian 10.
release: 4.19.0-23-amd64
version: #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64
Debian reports incorrect kernel version in utsname::release returned
by uname() syscall, which in older kernels (Debian 9, 10) leads to
kprobe BPF programs failing to load due to the version check mismatch.
Fortunately, the correct kernel code version presents in the
utsname::version returned by uname() syscall in Debian kernels. This
change adds another get kernel version function to handle Debian in
addition to the previously added get kernel version function to handle
Ubuntu. Some minor refactoring work is also done to make the code more
readable.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Signed-off-by: Ho-Ren (Jack) Chuang <horenchuang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230203234842.2933903-1-hao.xiang@bytedance.com
Loading programs that use bpf_usdt_arg() on s390x fails with:
; if (arg_num >= BPF_USDT_MAX_ARG_CNT || arg_num >= spec->arg_cnt)
128: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
129: (25) if r1 > 0xb goto pc+83 ; frame1: R1_w=scalar(umax=11,var_off=(0x0; 0xf))
...
; arg_spec = &spec->args[arg_num];
135: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
...
; switch (arg_spec->arg_type) {
139: (61) r1 = *(u32 *)(r2 +8)
R2 unbounded memory access, make sure to bounds check any such access
The reason is that, even though the C code enforces that
arg_num < BPF_USDT_MAX_ARG_CNT, the verifier cannot propagate this
constraint to the arg_spec assignment yet. Help it by forcing r1 back
to stack after comparison.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-23-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a prior change, the verifier was updated to support sleepable
BPF_PROG_TYPE_STRUCT_OPS programs. A caller could set the program as
sleepable with bpf_program__set_flags(), but it would be more ergonomic
and more in-line with other sleepable program types if we supported
suffixing a struct_ops section name with .s to indicate that it's
sleepable.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Each architecture supports at least 6 syscall argument registers, so now
that specs for each architecture is defined in bpf_tracing.h, remove
unnecessary macro overrides, which previously were required to keep
existing BPF_KSYSCALL() uses compiling and working.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-26-andrii@kernel.org
Set up generic support in bpf_tracing.h for up to 7 syscall arguments
tracing with BPF_KSYSCALL, which seems to be the limit according to
syscall(2) manpage. Also change the way that syscall convention is
specified to be more explicit. Subsequent patches will adjust and define
proper per-architecture syscall conventions.
__PT_PARM1_SYSCALL_REG through __PT_PARM6_SYSCALL_REG is added
temporarily to keep everything working before each architecture has
syscall reg tables defined. They will be removed afterwards.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-13-andrii@kernel.org
Add BPF_UPROBE and BPF_URETPROBE macros, aliased to BPF_KPROBE and
BPF_KRETPROBE, respectively. This makes uprobe-based BPF program code
much less confusing, especially to people new to tracing, at no cost in
terms of maintainability. We'll use this macro in selftests in
subsequent patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-11-andrii@kernel.org
Add BPF_KPROBE() and PT_REGS_PARMx() support for up to 8 arguments, if
target architecture supports this. Currently all architectures are
limited to only 5 register-placed arguments, which is limiting even on
x86-64.
This patch adds generic macro machinery to support up to 8 arguments
both when explicitly fetching it from pt_regs through PT_REGS_PARMx()
macros, as well as more ergonomic access in BPF_KPROBE().
Also, for i386 architecture we now don't have to define fake PARM4 and
PARM5 definitions, they will be generically substituted, just like for
PARM6 through PARM8.
Subsequent patches will fill out architecture-specific definitions,
where appropriate.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Link: https://lore.kernel.org/bpf/20230120200914.3008030-2-andrii@kernel.org
'.' is not allowed in the event name of kprobe. Therefore, we will get a
EINVAL if the kernel function name has a '.' in legacy kprobe attach
case, such as 'icmp_reply.constprop.0'.
In order to adapt this case, we need to replace the '.' with other char
in gen_kprobe_legacy_event_name(). And I use '_' for this propose.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20230113093427.1666466-1-imagedong@tencent.com
pr_warn calls into user-provided callback, which can clobber errno, so
`errno = saved_errno` should happen after pr_warn.
Fixes: 07453245620c ("libbpf: fix errno is overwritten after being closed.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the ensure_good_fd function, if the fcntl function succeeds but
the close function fails, ensure_good_fd returns a normal fd and
sets errno, which may cause users to misunderstand. The close
failure is not a serious problem, and the correct FD has been
handed over to the upper-layer application. Let's restore errno here.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Link: https://lore.kernel.org/r/20221223133618.10323-1-liuxin350@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When syncing with the kernel, the script generates a cover letter for
the latest changes using "git format-patch". Unless specified otherwise,
it uses a signature (as in, email footer signature) which defaults to
the Git version in use, and ends up in the commit logs. This doesn't
bring any useful information in there: let's get rid of this version
number.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Similarly, if new public API header files were added, the `Makefile` will need
to be adjusted as well.
Updating allow/deny lists
-------------------------
Libbpf CI intentionally runs a subset of latest BPF selftests on old kernel
(4.9 and 5.5, currently). It happens from time to time that some tests that
previously were successfully running on old kernels now don't, typically due to
reliance on some freshly added kernel feature. It might look something like this in [CI logs](https://github.com/libbpf/libbpf/actions/runs/4206303272/jobs/7299609578#step:4:2733):
```
All error logs:
serial_test_xdp_info:FAIL:get_xdp_none errno=2
#283 xdp_info:FAIL
Summary: 49/166 PASSED, 5 SKIPPED, 1 FAILED
```
In such case we can either work with upstream to fix test to be compatible with
old kernels, or we'll have to add a test into a denylist (or remove it from
allowlist, like was [done](https://github.com/libbpf/libbpf/commit/ea284299025bf85b85b4923191de6463cd43ccd6)
for the case above).
```
$ find . -name '*LIST*'
./ci/vmtest/configs/ALLOWLIST-4.9.0
./ci/vmtest/configs/DENYLIST-5.5.0
./ci/vmtest/configs/DENYLIST-latest.s390x
./ci/vmtest/configs/DENYLIST-latest
./ci/vmtest/configs/ALLOWLIST-5.5.0
```
Please determine which tests need to be added/removed from which list. And then
add that as a separate commit. **Please keep using the same branch name, so
that the same PR can be updated.** There is no need to open new PRs for each
such fix.
Regenerating vmlinux.h header
-----------------------------
To compile latest BPF selftests against old kernels, we check in pre-generated
header file, located at `.github/actions/build-selftests/vmlinux.h`, which
contains type definitions from latest upstream kernel. When after libbpf sync
upstream BPF selftests require new kernel types, we'd need to regenerate
`vmlinux.h` and check it in as well.
This will looks something like this in [CI logs](https://github.com/libbpf/libbpf/actions/runs/4198939244/jobs/7283214243#step:4:1903):
```
In file included from progs/test_spin_lock_fail.c:5:
/home/runner/work/libbpf/libbpf/.kernel/tools/testing/selftests/bpf/bpf_experimental.h:73:53: error: declaration of 'struct bpf_rb_root' will not be visible outside of this function [-Werror,-Wvisibility]
/home/runner/work/libbpf/libbpf/.kernel/tools/testing/selftests/bpf/bpf_experimental.h:81:35: error: declaration of 'struct bpf_rb_root' will not be visible outside of this function [-Werror,-Wvisibility]
/home/runner/work/libbpf/libbpf/.kernel/tools/testing/selftests/bpf/bpf_experimental.h:90:52: error: declaration of 'struct bpf_rb_root' will not be visible outside of this function [-Werror,-Wvisibility]
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
