e_shnum does include section #0 and as such is exactly the number of ELF
sections that we need to allocate memory for to use section indices as
array indices. Fix the off-by-one error.
This is purely accounting fix, previously we were overallocating one
too many array items. But no correctness errors otherwise.
Fixes: 25bbbd7a444b ("libbpf: Remove assumptions about uniqueness of .rodata/.data/.bss maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-5-andrii@kernel.org
.BTF and .BTF.ext ELF sections should have SHT_PROGBITS type and contain
data. If they are not, ELF is invalid or corrupted, so bail out.
Otherwise this can lead to data->d_buf being NULL and SIGSEGV later on.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-4-andrii@kernel.org
Deprecate AF_XDP support in libbpf ([0]). This has been moved to
libxdp as it is a better fit for that library. The AF_XDP support only
uses the public libbpf functions and can therefore just use libbpf as
a library from libxdp. The libxdp APIs are exactly the same so it
should just be linking with libxdp instead of libbpf for the AF_XDP
functionality. If not, please submit a bug report. Linking with both
libraries is supported but make sure you link in the correct order so
that the new functions in libxdp are used instead of the deprecated
ones in libbpf.
Libxdp can be found at https://github.com/xdp-project/xdp-tools.
[0] Closes: https://github.com/libbpf/libbpf/issues/270
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20211029090111.4733-1-magnus.karlsson@gmail.com
Add a simple wrapper for passing an fd and getting a new one >= 3 if it
is one of 0, 1, or 2. There are two primary reasons to make this change:
First, libbpf relies on the assumption a certain BPF fd is never 0 (e.g.
most recently noticed in [0]). Second, Alexei pointed out in [1] that
some environments reset stdin, stdout, and stderr if they notice an
invalid fd at these numbers. To protect against both these cases, switch
all internal BPF syscall wrappers in libbpf to always return an fd >= 3.
We only need to modify the syscall wrappers and not other code that
assumes a valid fd by doing >= 0, to avoid pointless churn, and because
it is still a valid assumption. The cost paid is two additional syscalls
if fd is in range [0, 2].
[0]: e31eec77e4ab ("bpf: selftests: Fix fd cleanup in get_branch_snapshot")
[1]: https://lore.kernel.org/bpf/CAADnVQKVKY8o_3aU8Gzke443+uHa-eGoM0h7W4srChMXU1S4Bg@mail.gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-5-memxor@gmail.com
This extends existing ksym relocation code to also support relocating
weak ksyms. Care needs to be taken to zero out the src_reg (currently
BPF_PSEUOD_BTF_ID, always set for gen_loader by bpf_object__relocate_data)
when the BTF ID lookup fails at runtime. This is not a problem for
libbpf as it only sets ext->is_set when BTF ID lookup succeeds (and only
proceeds in case of failure if ext->is_weak, leading to src_reg
remaining as 0 for weak unresolved ksym).
A pattern similar to emit_relo_kfunc_btf is followed of first storing
the default values and then jumping over actual stores in case of an
error. For src_reg adjustment, we also need to perform it when copying
the populated instruction, so depending on if copied insn[0].imm is 0 or
not, we decide to jump over the adjustment.
We cannot reach that point unless the ksym was weak and resolved and
zeroed out, as the emit_check_err will cause us to jump to cleanup
label, so we do not need to recheck whether the ksym is weak before
doing the adjustment after copying BTF ID and BTF FD.
This is consistent with how libbpf relocates weak ksym. Logging
statements are added to show the relocation result and aid debugging.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-4-memxor@gmail.com
This uses the bpf_kallsyms_lookup_name helper added in previous patches
to relocate typeless ksyms. The return value ENOENT can be ignored, and
the value written to 'res' can be directly stored to the insn, as it is
overwritten to 0 on lookup failure. For repeating symbols, we can simply
copy the previously populated bpf_insn.
Also, we need to take care to not close fds for typeless ksym_desc, so
reuse the 'off' member's space to add a marker for typeless ksym and use
that to skip them in cleanup_relos.
We add a emit_ksym_relo_log helper that avoids duplicating common
logging instructions between typeless and weak ksym (for future commit).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-3-memxor@gmail.com
This patch adds the libbpf infrastructure for supporting a
per-map-type "map_extra" field, whose definition will be
idiosyncratic depending on map type.
For example, for the bloom filter map, the lower 4 bits of
map_extra is used to denote the number of hash functions.
Please note that until libbpf 1.0 is here, the
"bpf_create_map_params" struct is used as a temporary
means for propagating the map_extra field to the kernel.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211027234504.30744-3-joannekoong@fb.com
This patch adds the kernel-side changes for the implementation of
a bpf bloom filter map.
The bloom filter map supports peek (determining whether an element
is present in the map) and push (adding an element to the map)
operations.These operations are exposed to userspace applications
through the already existing syscalls in the following way:
BPF_MAP_LOOKUP_ELEM -> peek
BPF_MAP_UPDATE_ELEM -> push
The bloom filter map does not have keys, only values. In light of
this, the bloom filter map's API matches that of queue stack maps:
user applications use BPF_MAP_LOOKUP_ELEM/BPF_MAP_UPDATE_ELEM
which correspond internally to bpf_map_peek_elem/bpf_map_push_elem,
and bpf programs must use the bpf_map_peek_elem and bpf_map_push_elem
APIs to query or add an element to the bloom filter map. When the
bloom filter map is created, it must be created with a key_size of 0.
For updates, the user will pass in the element to add to the map
as the value, with a NULL key. For lookups, the user will pass in the
element to query in the map as the value, with a NULL key. In the
verifier layer, this requires us to modify the argument type of
a bloom filter's BPF_FUNC_map_peek_elem call to ARG_PTR_TO_MAP_VALUE;
as well, in the syscall layer, we need to copy over the user value
so that in bpf_map_peek_elem, we know which specific value to query.
A few things to please take note of:
* If there are any concurrent lookups + updates, the user is
responsible for synchronizing this to ensure no false negative lookups
occur.
* The number of hashes to use for the bloom filter is configurable from
userspace. If no number is specified, the default used will be 5 hash
functions. The benchmarks later in this patchset can help compare the
performance of using different number of hashes on different entry
sizes. In general, using more hashes decreases both the false positive
rate and the speed of a lookup.
* Deleting an element in the bloom filter map is not supported.
* The bloom filter map may be used as an inner map.
* The "max_entries" size that is specified at map creation time is used
to approximate a reasonable bitmap size for the bloom filter, and is not
otherwise strictly enforced. If the user wishes to insert more entries
into the bloom filter than "max_entries", they may do so but they should
be aware that this may lead to a higher false positive rate.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211027234504.30744-2-joannekoong@fb.com
__BYTE_ORDER is supposed to be defined by a libc, and __BYTE_ORDER__ -
by a compiler. bpf_core_read.h checks __BYTE_ORDER == __LITTLE_ENDIAN,
which is true if neither are defined, leading to incorrect behavior on
big-endian hosts if libc headers are not included, which is often the
case.
Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-2-iii@linux.ibm.com
The name of the API doesn't convey clearly that this size is in number
of bytes (there needed to be a separate comment to make this clear in
libbpf.h). Further, measuring the size of BPF program in bytes is not
exactly the best fit, because BPF programs always consist of 8-byte
instructions. As such, bpf_program__insn_cnt() is a better alternative
in pretty much any imaginable case.
So schedule bpf_program__size() deprecation starting from v0.7 and it
will be removed in libbpf 1.0.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-5-andrii@kernel.org
Schedule deprecation of a set of APIs that are related to multi-instance
bpf_programs:
- bpf_program__set_prep() ([0]);
- bpf_program__{set,unset}_instance() ([1]);
- bpf_program__nth_fd().
These APIs are obscure, very niche, and don't seem to be used much in
practice. bpf_program__set_prep() is pretty useless for anything but the
simplest BPF programs, as it doesn't allow to adjust BPF program load
attributes, among other things. In short, it already bitrotted and will
bitrot some more if not removed.
With bpf_program__insns() API, which gives access to post-processed BPF
program instructions of any given entry-point BPF program, it's now
possible to do whatever necessary adjustments were possible with
set_prep() API before, but also more. Given any such use case is
automatically an advanced use case, requiring users to stick to
low-level bpf_prog_load() APIs and managing their own prog FDs is
reasonable.
[0] Closes: https://github.com/libbpf/libbpf/issues/299
[1] Closes: https://github.com/libbpf/libbpf/issues/300
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-4-andrii@kernel.org
Add APIs providing read-only access to bpf_program BPF instructions ([0]).
This is useful for diagnostics purposes, but it also allows a cleaner
support for cloning BPF programs after libbpf did all the FD resolution
and CO-RE relocations, subprog instructions appending, etc. Currently,
cloning BPF program is possible only through hijacking a half-broken
bpf_program__set_prep() API, which doesn't really work well for anything
but most primitive programs. For instance, set_prep() API doesn't allow
adjusting BPF program load parameters which are necessary for loading
fentry/fexit BPF programs (the case where BPF program cloning is
a necessity if doing some sort of mass-attachment functionality).
Given bpf_program__set_prep() API is set to be deprecated, having
a cleaner alternative is a must. libbpf internally already keeps track
of linear array of struct bpf_insn, so it's not hard to expose it. The
only gotcha is that libbpf previously freed instructions array during
bpf_object load time, which would make this API much less useful overall,
because in between bpf_object__open() and bpf_object__load() a lot of
changes to instructions are done by libbpf.
So this patch makes libbpf hold onto prog->insns array even after BPF
program loading. I think this is a small price for added functionality
and improved introspection of BPF program code.
See retsnoop PR ([1]) for how it can be used in practice and code
savings compared to relying on bpf_program__set_prep().
[0] Closes: https://github.com/libbpf/libbpf/issues/298
[1] https://github.com/anakryiko/retsnoop/pull/1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-3-andrii@kernel.org
The sync-kernel.sh script has two consecutive tests for $BPF_BRANCH
being provided by the user (and so the second one can currently never
fail). Looking at the error message displayed in each case, we want to
keep the second one. Let's remove the first check.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
The commit_signature() function does not use the hash of the commit,
which typically differs between the kernel repo and the mirrored
version, but the subject for this commit. Fix the comment accordingly.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Original code assumed fixed and correct BTF header length. That's not
always the case, though, so fix this bug with a proper additional check.
And use actual header length instead of sizeof(struct btf_header) in
sanity checks.
Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-2-andrii@kernel.org
btf_header's str_off+str_len or type_off+type_len can overflow as they
are u32s. This will lead to bypassing the sanity checks during BTF
parsing, resulting in crashes afterwards. Fix by using 64-bit signed
integers for comparison.
Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-1-andrii@kernel.org
Building libbpf sources out of kernel tree (in Github repo) we run into
compilation error due to unknown __aligned attribute. It must be coming
from some kernel header, which is not available to Github sources. Use
explicit __attribute__((aligned(16))) instead.
Fixes: 961632d54163 ("libbpf: Fix dumping non-aligned __int128")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022192502.2975553-1-andrii@kernel.org
Map name that's assigned to internal maps (.rodata, .data, .bss, etc)
consist of a small prefix of bpf_object's name and ELF section name as
a suffix. This makes it hard for users to "guess" the name to use for
looking up by name with bpf_object__find_map_by_name() API.
One proposal was to drop object name prefix from the map name and just
use ".rodata", ".data", etc, names. One downside called out was that
when multiple BPF applications are active on the host, it will be hard
to distinguish between multiple instances of .rodata and know which BPF
object (app) they belong to. Having few first characters, while quite
limiting, still can give a bit of a clue, in general.
Note, though, that btf_value_type_id for such global data maps (ARRAY)
points to DATASEC type, which encodes full ELF name, so tools like
bpftool can take advantage of this fact to "recover" full original name
of the map. This is also the reason why for custom .data.* and .rodata.*
maps libbpf uses only their ELF names and doesn't prepend object name at
all.
Another downside of such approach is that it is not backwards compatible
and, among direct use of bpf_object__find_map_by_name() API, will break
any BPF skeleton generated using bpftool that was compiled with older
libbpf version.
Instead of causing all this pain, libbpf will still generate map name
using a combination of object name and ELF section name, but it will
allow looking such maps up by their natural names, which correspond to
their respective ELF section names. This means non-truncated ELF section
names longer than 15 characters are going to be expected and supported.
With such set up, we get the best of both worlds: leave small bits of
a clue about BPF application that instantiated such maps, as well as
making it easy for user apps to lookup such maps at runtime. In this
sense it closes corresponding libbpf 1.0 issue ([0]).
BPF skeletons will continue using full names for lookups.
[0] Closes: https://github.com/libbpf/libbpf/issues/275
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-10-andrii@kernel.org
Add support for having multiple .rodata and .data data sections ([0]).
.rodata/.data are supported like the usual, but now also
.rodata.<whatever> and .data.<whatever> are also supported. Each such
section will get its own backing BPF_MAP_TYPE_ARRAY, just like
.rodata and .data.
Multiple .bss maps are not supported, as the whole '.bss' name is
confusing and might be deprecated soon, as well as user would need to
specify custom ELF section with SEC() attribute anyway, so might as well
stick to just .data.* and .rodata.* convention.
User-visible map name for such new maps is going to be just their ELF
section names.
[0] https://github.com/libbpf/libbpf/issues/274
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-8-andrii@kernel.org
Remove internal libbpf assumption that there can be only one .rodata,
.data, and .bss map per BPF object. To achieve that, extend and
generalize the scheme that was used for keeping track of relocation ELF
sections. Now each ELF section has a temporary extra index that keeps
track of logical type of ELF section (relocations, data, read-only data,
BSS). Switch relocation to this scheme, as well as .rodata/.data/.bss
handling.
We don't yet allow multiple .rodata, .data, and .bss sections, but no
libbpf internal code makes an assumption that there can be only one of
each and thus they can be explicitly referenced by a single index. Next
patches will actually allow multiple .rodata and .data sections.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-5-andrii@kernel.org
Minimize the usage of class-agnostic gelf_xxx() APIs from libelf. These
APIs require copying ELF data structures into local GElf_xxx structs and
have a more cumbersome API. BPF ELF file is defined to be always 64-bit
ELF object, even when intended to be run on 32-bit host architectures,
so there is no need to do class-agnostic conversions everywhere. BPF
static linker implementation within libbpf has been using Elf64-specific
types since initial implementation.
Add two simple helpers, elf_sym_by_idx() and elf_rel_by_idx(), for more
succinct direct access to ELF symbol and relocation records within ELF
data itself and switch all the GElf_xxx usage into Elf64_xxx
equivalents. The only remaining place within libbpf.c that's still using
gelf API is gelf_getclass(), as there doesn't seem to be a direct way to
get underlying ELF bitness.
No functional changes intended.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-4-andrii@kernel.org
There isn't a good use case where anyone but libbpf itself needs to call
btf__finalize_data(). It was implemented for internal use and it's not
clear why it was made into public API in the first place. To function, it
requires active ELF data, which is stored inside bpf_object for the
duration of opening phase only. But the only BTF that needs bpf_object's
ELF is that bpf_object's BTF itself, which libbpf fixes up automatically
during bpf_object__open() operation anyways. There is no need for any
additional fix up and no reasonable scenario where it's useful and
appropriate.
Thus, btf__finalize_data() is just an API atavism and is better removed.
So this patch marks it as deprecated immediately (v0.6+) and moves the
code from btf.c into libbpf.c where it's used in the context of
bpf_object opening phase. Such code co-location allows to make code
structure more straightforward and remove bpf_object__section_size() and
bpf_object__variable_offset() internal helpers from libbpf_internal.h,
making them static. Their naming is also adjusted to not create
a wrong illusion that they are some sort of method of bpf_object. They
are internal helpers and are called appropriately.
This is part of libbpf 1.0 effort ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/276
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-2-andrii@kernel.org
Patch set [1] introduced BTF_KIND_TAG to allow tagging
declarations for struct/union, struct/union field, var, func
and func arguments and these tags will be encoded into
dwarf. They are also encoded to btf by llvm for the bpf target.
After BTF_KIND_TAG is introduced, we intended to use it
for kernel __user attributes. But kernel __user is actually
a type attribute. Upstream and internal discussion showed
it is not a good idea to mix declaration attribute and
type attribute. So we proposed to introduce btf_type_tag
as a type attribute and existing btf_tag renamed to
btf_decl_tag ([2]).
This patch renamed BTF_KIND_TAG to BTF_KIND_DECL_TAG and some
other declarations with *_tag to *_decl_tag to make it clear
the tag is for declaration. In the future, BTF_KIND_TYPE_TAG
might be introduced per [3].
[1] https://lore.kernel.org/bpf/20210914223004.244411-1-yhs@fb.com/
[2] https://reviews.llvm.org/D111588
[3] https://reviews.llvm.org/D111199
Fixes: b5ea834dde6b ("bpf: Support for new btf kind BTF_KIND_TAG")
Fixes: 5b84bd10363e ("libbpf: Add support for BTF_KIND_TAG")
Fixes: 5c07f2fec003 ("bpftool: Add support for BTF_KIND_TAG")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211012164838.3345699-1-yhs@fb.com
When fed an empty BPF object, bpftool gen skeleton -L crashes at
btf__set_fd() since it assumes presence of obj->btf, however for
the sequence below clang adds no .BTF section (hence no BTF).
Reproducer:
$ touch a.bpf.c
$ clang -O2 -g -target bpf -c a.bpf.c
$ bpftool gen skeleton -L a.bpf.o
/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
/* THIS FILE IS AUTOGENERATED! */
struct a_bpf {
struct bpf_loader_ctx ctx;
Segmentation fault (core dumped)
The same occurs for files compiled without BTF info, i.e. without
clang's -g flag.
Fixes: 67234743736a (libbpf: Generate loader program out of BPF ELF file.)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210930061634.1840768-1-memxor@gmail.com
Add a bulk copying api, btf__add_btf(), that speeds up and simplifies
appending entire contents of one BTF object to another one, taking care
of copying BTF type data, adjusting resulting BTF type IDs according to
their new locations in the destination BTF object, as well as copying
and deduplicating all the referenced strings and updating all the string
offsets in new BTF types as appropriate.
This API is intended to be used from tools that are generating and
otherwise manipulating BTFs generically, such as pahole. In pahole's
case, this API is useful for speeding up parallelized BTF encoding, as
it allows pahole to offload all the intricacies of BTF type copying to
libbpf and handle the parallelization aspects of the process.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/bpf/20211006051107.17921-2-andrii@kernel.org
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
Preserve these calls as it allows verifier to succeed in loading the
program if they are determined to be unreachable after dead code
elimination during program load. If not, the verifier will fail at
runtime. This is done for ext->is_weak symbols similar to the case for
variable ksyms.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-8-memxor@gmail.com
This patch adds libbpf support for kernel module function call support.
The fd_array parameter is used during BPF program load to pass module
BTFs referenced by the program. insn->off is set to index into this
array, but starts from 1, because insn->off as 0 is reserved for
btf_vmlinux.
We try to use existing insn->off for a module, since the kernel limits
the maximum distinct module BTFs for kfuncs to 256, and also because
index must never exceed the maximum allowed value that can fit in
insn->off (INT16_MAX). In the future, if kernel interprets signed offset
as unsigned for kfunc calls, this limit can be increased to UINT16_MAX.
Also introduce a btf__find_by_name_kind_own helper to start searching
from module BTF's start id when we know that the BTF ID is not present
in vmlinux BTF (in find_ksym_btf_id).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-7-memxor@gmail.com
When the loader indicates an internal error (result of a checked bpf
system call), it returns the result in attr.test.retval. However, tests
that rely on ASSERT_OK_PTR on NULL (returned from light skeleton) may
miss that NULL denotes an error if errno is set to 0. This would result
in skel pointer being NULL, while ASSERT_OK_PTR returning 1, leading to
a SEGV on dereference of skel, because libbpf_get_error relies on the
assumption that errno is always set in case of error for ptr == NULL.
In particular, this was observed for the ksyms_module test. When
executed using `./test_progs -t ksyms`, prior tests manipulated errno
and the test didn't crash when it failed at ksyms_module load, while
using `./test_progs -t ksyms_module` crashed due to errno being
untouched.
Fixes: 67234743736a (libbpf: Generate loader program out of BPF ELF file.)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-11-memxor@gmail.com
The previous patch to ignore STT_SECTION symbols only added the ignore
condition in one of them. This fails if there's more than one map
definition in the 'maps' section, because the subsequent modulus check will
fail, resulting in error messages like:
libbpf: elf: unable to determine legacy map definition size in ./xdpdump_xdp.o
Fix this by also ignoring STT_SECTION in the first loop.
Fixes: c3e8c44a9063 ("libbpf: Ignore STT_SECTION symbols in 'maps' section")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929213837.832449-1-toke@redhat.com
Initial idea was to run it hourly, but when it runs hourly it produce a
lot of useless noise and we had to switch it do daily. When we run it
daily caching make much less sense and only make debugging more complex.
When a BPF object is compiled without BTF info (without -g),
trying to link such objects using bpftool causes a SIGSEGV due to
btf__get_nr_types accessing obj->btf which is NULL. Fix this by
checking for the NULL pointer, and return error.
Reproducer:
$ cat a.bpf.c
extern int foo(void);
int bar(void) { return foo(); }
$ cat b.bpf.c
int foo(void) { return 0; }
$ clang -O2 -target bpf -c a.bpf.c
$ clang -O2 -target bpf -c b.bpf.c
$ bpftool gen obj out a.bpf.o b.bpf.o
Segmentation fault (core dumped)
After fix:
$ bpftool gen obj out a.bpf.o b.bpf.o
libbpf: failed to find BTF info for object 'a.bpf.o'
Error: failed to link 'a.bpf.o': Unknown error -22 (-22)
Fixes: a46349227cd8 (libbpf: Add linker extern resolution support for functions and global variables)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210924023725.70228-1-memxor@gmail.com
Update "sk_lookup/" definition to be a stand-alone type specifier,
with backwards-compatible prefix match logic in non-libbpf-1.0 mode.
Currently in selftests all the "sk_lookup/<whatever>" uses just use
<whatever> for duplicated unique name encoding, which is redundant as
BPF program's name (C function name) uniquely and descriptively
identifies the intended use for such BPF programs.
With libbpf's SEC_DEF("sk_lookup") definition updated, switch existing
sk_lookup programs to use "unqualified" SEC("sk_lookup") section names,
with no random text after it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-11-andrii@kernel.org
Implement strict ELF section name handling for BPF programs. It utilizes
`libbpf_set_strict_mode()` framework and adds new flag: LIBBPF_STRICT_SEC_NAME.
If this flag is set, libbpf will enforce exact section name matching for
a lot of program types that previously allowed just partial prefix
match. E.g., if previously SEC("xdp_whatever_i_want") was allowed, now
in strict mode only SEC("xdp") will be accepted, which makes SEC("")
definitions cleaner and more structured. SEC() now won't be used as yet
another way to uniquely encode BPF program identifier (for that
C function name is better and is guaranteed to be unique within
bpf_object). Now SEC() is strictly BPF program type and, depending on
program type, extra load/attach parameter specification.
Libbpf completely supports multiple BPF programs in the same ELF
section, so multiple BPF programs of the same type/specification easily
co-exist together within the same bpf_object scope.
Additionally, a new (for now internal) convention is introduced: section
name that can be a stand-alone exact BPF program type specificator, but
also could have extra parameters after '/' delimiter. An example of such
section is "struct_ops", which can be specified by itself, but also
allows to specify the intended operation to be attached to, e.g.,
"struct_ops/dctcp_init". Note, that "struct_ops_some_op" is not allowed.
Such section definition is specified as "struct_ops+".
This change is part of libbpf 1.0 effort ([0], [1]).
[0] Closes: https://github.com/libbpf/libbpf/issues/271
[1] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-10-andrii@kernel.org
Complete SEC() table refactoring towards unified form by rewriting
BPF_APROG_SEC and BPF_EAPROG_SEC definitions with
SEC_DEF(SEC_ATTACHABLE_OPT) (for optional expected_attach_type) and
SEC_DEF(SEC_ATTACHABLE) (mandatory expected_attach_type), respectively.
Drop BPF_APROG_SEC, BPF_EAPROG_SEC, and BPF_PROG_SEC_IMPL macros after
that, leaving SEC_DEF() macro as the only one used.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-9-andrii@kernel.org
Refactor ELF section handler definitions table to use a set of flags and
unified SEC_DEF() macro. This allows for more succinct and table-like
set of definitions, and allows to more easily extend the logic without
adding more verbosity (this is utilized in later patches in the series).
This approach is also making libbpf-internal program pre-load callback
not rely on bpf_sec_def definition, which demonstrates that future
pluggable ELF section handlers will be able to achieve similar level of
integration without libbpf having to expose extra types and APIs.
For starters, update SEC_DEF() definitions and make them more succinct.
Also convert BPF_PROG_SEC() and BPF_APROG_COMPAT() definitions to
a common SEC_DEF() use.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-8-andrii@kernel.org
Move closer to not relying on bpf_sec_def internals that won't be part
of public API, when pluggable SEC() handlers will be allowed. Drop
pre-calculated prefix length, and in various helpers don't rely on this
prefix length availability. Also minimize reliance on knowing
bpf_sec_def's prefix for few places where section prefix shortcuts are
supported (e.g., tp vs tracepoint, raw_tp vs raw_tracepoint).
Given checking some string for having a given string-constant prefix is
such a common operation and so annoying to be done with pure C code, add
a small macro helper, str_has_pfx(), and reuse it throughout libbpf.c
where prefix comparison is performed. With __builtin_constant_p() it's
possible to have a convenient helper that checks some string for having
a given prefix, where prefix is either string literal (or compile-time
known string due to compiler optimization) or just a runtime string
pointer, which is quite convenient and saves a lot of typing and string
literal duplication.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-7-andrii@kernel.org
Refactor internals of libbpf to allow adding custom SEC() handling logic
easily from outside of libbpf. To that effect, each SEC()-handling
registration sets mandatory program type/expected attach type for
a given prefix and can provide three callbacks called at different
points of BPF program lifetime:
- init callback for right after bpf_program is initialized and
prog_type/expected_attach_type is set. This happens during
bpf_object__open() step, close to the very end of constructing
bpf_object, so all the libbpf APIs for querying and updating
bpf_program properties should be available;
- pre-load callback is called right before BPF_PROG_LOAD command is
called in the kernel. This callbacks has ability to set both
bpf_program properties, as well as program load attributes, overriding
and augmenting the standard libbpf handling of them;
- optional auto-attach callback, which makes a given SEC() handler
support auto-attachment of a BPF program through bpf_program__attach()
API and/or BPF skeletons <skel>__attach() method.
Each callbacks gets a `long cookie` parameter passed in, which is
specified during SEC() handling. This can be used by callbacks to lookup
whatever additional information is necessary.
This is not yet completely ready to be exposed to the outside world,
mainly due to non-public nature of struct bpf_prog_load_params. Instead
of making it part of public API, we'll wait until the planned low-level
libbpf API improvements for BPF_PROG_LOAD and other typical bpf()
syscall APIs, at which point we'll have a public, probably OPTS-based,
way to fully specify BPF program load parameters, which will be used as
an interface for custom pre-load callbacks.
But this change itself is already a good first step to unify the BPF
program hanling logic even within the libbpf itself. As one example, all
the extra per-program type handling (sleepable bit, attach_btf_id
resolution, unsetting optional expected attach type) is now more obvious
and is gathered in one place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-6-andrii@kernel.org
When parsing legacy map definitions, libbpf would error out when
encountering an STT_SECTION symbol. This becomes a problem because some
versions of binutils will produce SECTION symbols for every section when
processing an ELF file, so BPF files run through 'strip' will end up with
such symbols, making libbpf refuse to load them.
There's not really any reason why erroring out is strictly necessary, so
change libbpf to just ignore SECTION symbols when parsing the ELF.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210927205810.715656-1-toke@redhat.com
Similarly to recently added legacy kprobe attach interface support
through tracefs, support attaching uprobes using the legacy interface if
host kernel doesn't support newer FD-based interface.
For uprobes event name consists of "libbpf_" prefix, PID, sanitized
binary path and offset within that binary. Structuraly the code is
aligned with kprobe logic refactoring in previous patch. struct
bpf_link_perf is re-used and all the same legacy_probe_name and
legacy_is_retprobe fields are used to ensure proper cleanup on
bpf_link__destroy().
Users should be aware, though, that on old kernels which don't support
FD-based interface for kprobe/uprobe attachment, if the application
crashes before bpf_link__destroy() is called, uprobe legacy
events will be left in tracefs. This is the same limitation as with
legacy kprobe interfaces.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210921210036.1545557-5-andrii@kernel.org
Refactor legacy kprobe handling code to follow the same logic as uprobe
legacy logic added in the next patchs:
- add append_to_file() helper that makes it simpler to work with
tracefs file-based interface for creating and deleting probes;
- move out probe/event name generation outside of the code that
adds/removes it, which simplifies bookkeeping significantly;
- change the probe name format to start with "libbpf_" prefix and
include offset within kernel function;
- switch 'unsigned long' to 'size_t' for specifying kprobe offsets,
which is consistent with how uprobes define that, simplifies
printf()-ing internally, and also avoids unnecessary complications on
architectures where sizeof(long) != sizeof(void *).
This patch also implicitly fixes the problem with invalid open() error
handling present in poke_kprobe_events(), which (the function) this
patch removes.
Fixes: ca304b40c20d ("libbpf: Introduce legacy kprobe events support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210921210036.1545557-4-andrii@kernel.org
This adds comments above functions in libbpf.h which document
their uses. These comments are of a format that doxygen and sphinx
can pick up and render. These are rendered by libbpf.readthedocs.org
These doc comments are for:
- bpf_object__find_map_by_name()
- bpf_map__fd()
- bpf_map__is_internal()
- libbpf_get_error()
- libbpf_num_possible_cpus()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210918031457.36204-1-grantseltzer@gmail.com
The __bpf_printk convenience macro was using a 'char' fmt string holder
as it predates support for globals in libbpf. Move to more efficient
'static const char', but provide a fallback to the old way via
BPF_NO_GLOBAL_DATA so users on old kernels can still use the macro.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-6-davemarchevsky@fb.com
Instead of being a thin wrapper which calls into bpf_trace_printk,
libbpf's bpf_printk convenience macro now chooses between
bpf_trace_printk and bpf_trace_vprintk. If the arg count (excluding
format string) is >3, use bpf_trace_vprintk, otherwise use the older
helper.
The motivation behind this added complexity - instead of migrating
entirely to bpf_trace_vprintk - is to maintain good developer experience
for users compiling against new libbpf but running on older kernels.
Users who are passing <=3 args to bpf_printk will see no change in their
bytecode.
__bpf_vprintk functions similarly to BPF_SEQ_PRINTF and BPF_SNPRINTF
macros elsewhere in the file - it allows use of bpf_trace_vprintk
without manual conversion of varargs to u64 array. Previous
implementation of bpf_printk macro is moved to __bpf_printk for use by
the new implementation.
This does change behavior of bpf_printk calls with >3 args in the "new
libbpf, old kernels" scenario. Before this patch, attempting to use 4
args to bpf_printk results in a compile-time error. After this patch,
using bpf_printk with 4 args results in a trace_vprintk helper call
being emitted and a load-time failure on older kernels.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-5-davemarchevsky@fb.com
bpf_object_open_opts.attach_prog_fd makes a pretty strong assumption
that bpf_object contains either only single freplace BPF program or all
of BPF programs in BPF object are freplaces intended to replace
different subprograms of the same target BPF program. This seems both
a bit confusing, too assuming, and limiting.
We've had bpf_program__set_attach_target() API which allows more
fine-grained control over this, on a per-program level. As such, mark
open_opts.attach_prog_fd as deprecated starting from v0.7, so that we
have one more universal way of setting freplace targets. With previous
change to allow NULL attach_func_name argument, and especially combined
with BPF skeleton, arguable bpf_program__set_attach_target() is a more
convenient and explicit API as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-7-andrii@kernel.org
Allow to use bpf_program__set_attach_target to only set target attach
program FD, while letting libbpf to use target attach function name from
SEC() definition. This might be useful for some scenarios where
bpf_object contains multiple related freplace BPF programs intended to
replace different sub-programs in target BPF program. In such case all
programs will have the same attach_prog_fd, but different
attach_func_name. It's convenient to specify such target function names
declaratively in SEC() definitions, but attach_prog_fd is a dynamic
runtime setting.
To simplify such scenario, allow bpf_program__set_attach_target() to
delay BTF ID resolution till the BPF program load time by providing NULL
attach_func_name. In that case the behavior will be similar to using
bpf_object_open_opts.attach_prog_fd (which is marked deprecated since
v0.7), but has the benefit of allowing more control by user in what is
attached to what. Such setup allows having BPF programs attached to
different target attach_prog_fd with target functions still declaratively
recorded in BPF source code in SEC() definitions.
Selftests changes in the next patch should make this more obvious.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-5-andrii@kernel.org
Doing substring matches allows accidental new tests to be enabled,
when they are not supposed to be. E.g., whitelisting "xdp" allows new
"xdpwall" test on 5.5.0, which wasn't supposed to happen.
Cc: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
There is a problem in bpf-next tree which causes get_stack_raw_tp and
few other selftests to produce tons of kernel warnings, timing out and
failing CI test runs. Blacklist until bpf tree, which has a fix, is
merged into bpf-next.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
LLVM14 added support for a new C attribute ([1])
__attribute__((btf_tag("arbitrary_str")))
This attribute will be emitted to dwarf ([2]) and pahole
will convert it to BTF. Or for bpf target, this
attribute will be emitted to BTF directly ([3], [4]).
The attribute is intended to provide additional
information for
- struct/union type or struct/union member
- static/global variables
- static/global function or function parameter.
For linux kernel, the btf_tag can be applied
in various places to specify user pointer,
function pre- or post- condition, function
allow/deny in certain context, etc. Such information
will be encoded in vmlinux BTF and can be used
by verifier.
The btf_tag can also be applied to bpf programs
to help global verifiable functions, e.g.,
specifying preconditions, etc.
This patch added basic parsing and checking support
in kernel for new BTF_KIND_TAG kind.
[1] https://reviews.llvm.org/D106614
[2] https://reviews.llvm.org/D106621
[3] https://reviews.llvm.org/D106622
[4] https://reviews.llvm.org/D109560
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223015.245546-1-yhs@fb.com
Remove almost all the code that explicitly iterated BPF program section
definitions in favor of using find_sec_def(). The only remaining user of
section_defs is libbpf_get_type_names that has to iterate all of them to
construct its result.
Having one internal API entry point for section definitions will
simplify further refactorings around libbpf's program section
definitions parsing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914014733.2768-5-andrii@kernel.org
Remove the need to explicitly pass bpf_sec_def for auto-attachable BPF
programs, as it is already recorded at bpf_object__open() time for all
recognized type of BPF programs. This further reduces number of explicit
calls to find_sec_def(), simplifying further refactorings.
No functional changes are done by this patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914014733.2768-4-andrii@kernel.org
Refactor bpf_object__open() sequencing to perform BPF program type
detection based on SEC() definitions before we get to relocations
collection. This allows to have more information about BPF program by
the time we get to, say, struct_ops relocation gathering. This,
subsequently, simplifies struct_ops logic and removes the need to
perform extra find_sec_def() resolution.
With this patch libbpf will require all struct_ops BPF programs to be
marked with SEC("struct_ops") or SEC("struct_ops/xxx") annotations.
Real-world applications are already doing that through something like
selftests's BPF_STRUCT_OPS() macro. This change streamlines libbpf's
internal handling of SEC() definitions and is in the sprit of
upcoming libbpf-1.0 section strictness changes ([0]).
[0] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914014733.2768-3-andrii@kernel.org
Allow kprobe tracepoint events creation through legacy interface, as the
kprobe dynamic PMUs support, used by default, was only created in v4.17.
Store legacy kprobe name in struct bpf_perf_link, instead of creating
a new "subclass" off of bpf_perf_link. This is ok as it's just two new
fields, which are also going to be reused for legacy uprobe support in
follow up patches.
Signed-off-by: Rafael David Tinoco <rafaeldtinoco@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210912064844.3181742-1-rafaeldtinoco@gmail.com
Turn previously auto-generated libbpf_version.h header into a normal
header file. This prevents various tricky Makefile integration issues,
simplifies the overall build process, but also allows to further extend
it with some more versioning-related APIs in the future.
To prevent accidental out-of-sync versions as defined by libbpf.map and
libbpf_version.h, Makefile checks their consistency at build time.
Simultaneously with this change bump libbpf.map to v0.6.
Also undo adding libbpf's output directory into include path for
kernel/bpf/preload, bpftool, and resolve_btfids, which is not necessary
because libbpf_version.h is just a normal header like any other.
Fixes: 0b46b7550560 ("libbpf: Add LIBBPF_DEPRECATED_SINCE macro for scheduling API deprecations")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210913222309.3220849-1-andrii@kernel.org
Introduce bpf_get_branch_snapshot(), which allows tracing pogram to get
branch trace from hardware (e.g. Intel LBR). To use the feature, the
user need to create perf_event with proper branch_record filtering
on each cpu, and then calls bpf_get_branch_snapshot in the bpf function.
On Intel CPUs, VLBR event (raw event 0x1b00) can be use for this.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210910183352.3151445-3-songliubraving@fb.com
BPF programs may want to know hardware timestamps if NIC supports
such timestamping.
Expose this data as hwtstamp field of __sk_buff the same way as
gso_segs/gso_size. This field could be accessed from the same
programs as tstamp field, but it's read-only field. Explicit test
to deny access to padding data is added to bpf_skb_is_valid_access.
Also update BPF_PROG_TEST_RUN tests of the feature.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210909220409.8804-2-vfedorenko@novek.ru
Introduce a macro LIBBPF_DEPRECATED_SINCE(major, minor, message) to prepare
the deprecation of two API functions. This macro marks functions as deprecated
when libbpf's version reaches the values passed as an argument.
As part of this change libbpf_version.h header is added with recorded major
(LIBBPF_MAJOR_VERSION) and minor (LIBBPF_MINOR_VERSION) libbpf version macros.
They are now part of libbpf public API and can be relied upon by user code.
libbpf_version.h is installed system-wide along other libbpf public headers.
Due to this new build-time auto-generated header, in-kernel applications
relying on libbpf (resolve_btfids, bpftool, bpf_preload) are updated to
include libbpf's output directory as part of a list of include search paths.
Better fix would be to use libbpf's make_install target to install public API
headers, but that clean up is left out as a future improvement. The build
changes were tested by building kernel (with KBUILD_OUTPUT and O= specified
explicitly), bpftool, libbpf, selftests/bpf, and resolve_btfids builds. No
problems were detected.
Note that because of the constraints of the C preprocessor we have to write
a few lines of macro magic for each version used to prepare deprecation (0.6
for now).
Also, use LIBBPF_DEPRECATED_SINCE() to schedule deprecation of
btf__get_from_id() and btf__load(), which are replaced by
btf__load_from_kernel_by_id() and btf__load_into_kernel(), respectively,
starting from future libbpf v0.6. This is part of libbpf 1.0 effort ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/278
Co-developed-by: Quentin Monnet <quentin@isovalent.com>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210908213226.1871016-1-andrii@kernel.org
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
file, which can temporarily record the mtu value of the last
received RA message when the RA mtu value is lower than the
interface mtu, but this proc has following limitations:
(1) when the interface mtu (/sys/class/net/<iface>/mtu) is
updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
be updated to the value of interface mtu;
(2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
ipv6 connection, and not affect ipv4.
Therefore, when the mtu option is carried in the RA message,
there will be a problem that the user sometimes cannot obtain
RA mtu value correctly by reading mtu6.
After this patch set, if a RA message carries the mtu option,
you can send a netlink msg which nlmsg_type is RTM_GETLINK,
and then by parsing the attribute of IFLA_INET6_RA_MTU to
get the mtu value carried in the RA message received on the
inet6 device. In addition, you can also get a link notification
when ra_mtu is updated so it doesn't have to poll.
In this way, if the MTU values that the device receives from
the network in the PCO IPv4 and the RA IPv6 procedures are
different, the user can obtain the correct ipv6 ra_mtu value
and compare the value of ra_mtu and ipv4 mtu, then the device
can use the lower MTU value for both IPv4 and IPv6.
Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use this list of enabled tests as a whitelist, so that we don't have to
keep updating BLACKLIST-5.5.0 anymore. I'll keep BLACKLIST-5.5.0 for
now, because it serves as a nice historic log of which tests depend on
which kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This change was necessary to enforce the implied contract
that bpf_object_skeleton->data should not be mutated. The data
will be cast to `void *` during assignment to handle the case
where a user is compiling with older libbpf headers to avoid
a compiler warning of `const void *` data being cast to `void *`
Signed-off-by: Matt Smith <alastorze@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901194439.3853238-2-alastorze@fb.com
If libbpf encounters an ELF file that has been stripped of its symbol
table, it will crash in bpf_object__add_programs() when trying to
dereference the obj->efile.symbols pointer.
Fix this by erroring out of bpf_object__elf_collect() if it is not able
able to find the symbol table.
v2:
- Move check into bpf_object__elf_collect() and add nice error message
Fixes: 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901114812.204720-1-toke@redhat.com
The motivation behind this helper is to access userspace pt_regs in a
kprobe handler.
uprobe's ctx is the userspace pt_regs. kprobe's ctx is the kernelspace
pt_regs. bpf_task_pt_regs() allows accessing userspace pt_regs in a
kprobe handler. The final case (kernelspace pt_regs in uprobe) is
pretty rare (usermode helper) so I think that can be solved later if
necessary.
More concretely, this helper is useful in doing BPF-based DWARF stack
unwinding. Currently the kernel can only do framepointer based stack
unwinds for userspace code. This is because the DWARF state machines are
too fragile to be computed in kernelspace [0]. The idea behind
DWARF-based stack unwinds w/ BPF is to copy a chunk of the userspace
stack (while in prog context) and send it up to userspace for unwinding
(probably with libunwind) [1]. This would effectively enable profiling
applications with -fomit-frame-pointer using kprobes and uprobes.
[0]: https://lkml.org/lkml/2012/2/10/356
[1]: https://github.com/danobi/bpf-dwarf-walk
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/e2718ced2d51ef4268590ab8562962438ab82815.1629772842.git.dxu@dxuuu.xyz
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf
attach types and a function to map bpf_attach_type values to the new
enum. Inspired by netns_bpf_attach_type.
Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever
possible. Functionality is unchanged as attach_type_to_prog_type
switches in bpf/syscall.c were preventing non-cgroup programs from
making use of the invalid cgroup_bpf array slots.
As a result struct cgroup_bpf uses 504 fewer bytes relative to when its
arrays were sized using MAX_BPF_ATTACH_TYPE.
bpf_cgroup_storage is notably not migrated as struct
bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type
member which is not meant to be opaque. Similarly, bpf_cgroup_link
continues to report its bpf_attach_type member to userspace via fdinfo
and bpf_link_info.
To ease disambiguation, bpf_attach_type variables are renamed from
'type' to 'atype' when changed to cgroup_bpf_attach_type.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com
This patch renames a documentation libbpf.rst to index.rst. In order
for readthedocs.org to pick this file up and properly build the
documentation site.
It also changes the title type of the ABI subsection in the
naming convention doc. This is so that readthedocs.org doesn't treat this
section as a separate document.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210818151313.49992-1-grantseltzer@gmail.com
When attaching to uprobes through perf subsystem, it's possible to specify
offset of a so-called USDT semaphore, which is just a reference counted u16,
used by kernel to keep track of how many tracers are attached to a given
location. Support for this feature was added in [0], so just wire this through
uprobe_opts. This is important to enable implementing USDT attachment and
tracing through libbpf's bpf_program__attach_uprobe_opts() API.
[0] a6ca88b241d5 ("trace_uprobe: support reference counter in fd-based uprobe")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-16-andrii@kernel.org
Wire through bpf_cookie for all attach APIs that use perf_event_open under the
hood:
- for kprobes, extend existing bpf_kprobe_opts with bpf_cookie field;
- for perf_event, uprobe, and tracepoint APIs, add their _opts variants and
pass bpf_cookie through opts.
For kernel that don't support BPF_LINK_CREATE for perf_events, and thus
bpf_cookie is not supported either, return error and log warning for user.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-12-andrii@kernel.org
Add ability to specify bpf_cookie value when creating BPF perf link with
bpf_link_create() low-level API.
Given BPF_LINK_CREATE command is growing and keeps getting new fields that are
specific to the type of BPF_LINK, extend libbpf side of bpf_link_create() API
and corresponding OPTS struct to accomodate such changes. Add extra checks to
prevent using incompatible/unexpected combinations of fields.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-11-andrii@kernel.org
Detect kernel support for BPF perf link and prefer it when attaching to
perf_event, tracepoint, kprobe/uprobe. Underlying perf_event FD will be kept
open until BPF link is destroyed, at which point both perf_event FD and BPF
link FD will be closed.
This preserves current behavior in which perf_event FD is open for the
duration of bpf_link's lifetime and user is able to "disconnect" bpf_link from
underlying FD (with bpf_link__disconnect()), so that bpf_link__destroy()
doesn't close underlying perf_event FD.When BPF perf link is used, disconnect
will keep both perf_event and bpf_link FDs open, so it will be up to
(advanced) user to close them. This approach is demonstrated in bpf_cookie.c
selftests, added in this patch set.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-10-andrii@kernel.org
bpf_link->destroy() isn't used by any code, so remove it. Instead, add ability
to override deallocation procedure, with default doing plain free(link). This
is necessary for cases when we want to "subclass" struct bpf_link to keep
extra information, as is the case in the next patch adding struct
bpf_link_perf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-9-andrii@kernel.org
Add new BPF helper, bpf_get_attach_cookie(), which can be used by BPF programs
to get access to a user-provided bpf_cookie value, specified during BPF
program attachment (BPF link creation) time.
Naming is hard, though. With the concept being named "BPF cookie", I've
considered calling the helper:
- bpf_get_cookie() -- seems too unspecific and easily mistaken with socket
cookie;
- bpf_get_bpf_cookie() -- too much tautology;
- bpf_get_link_cookie() -- would be ok, but while we create a BPF link to
attach BPF program to BPF hook, it's still an "attachment" and the
bpf_cookie is associated with BPF program attachment to a hook, not a BPF
link itself. Technically, we could support bpf_cookie with old-style
cgroup programs.So I ultimately rejected it in favor of
bpf_get_attach_cookie().
Currently all perf_event-backed BPF program types support
bpf_get_attach_cookie() helper. Follow-up patches will add support for
fentry/fexit programs as well.
While at it, mark bpf_tracing_func_proto() as static to make it obvious that
it's only used from within the kernel/trace/bpf_trace.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-7-andrii@kernel.org
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
Introduce a new type of BPF link - BPF perf link. This brings perf_event-based
BPF program attachments (perf_event, tracepoints, kprobes, and uprobes) into
the common BPF link infrastructure, allowing to list all active perf_event
based attachments, auto-detaching BPF program from perf_event when link's FD
is closed, get generic BPF link fdinfo/get_info functionality.
BPF_LINK_CREATE command expects perf_event's FD as target_fd. No extra flags
are currently supported.
Force-detaching and atomic BPF program updates are not yet implemented, but
with perf_event-based BPF links we now have common framework for this without
the need to extend ioctl()-based perf_event interface.
One interesting consideration is a new value for bpf_attach_type, which
BPF_LINK_CREATE command expects. Generally, it's either 1-to-1 mapping from
bpf_attach_type to bpf_prog_type, or many-to-1 mapping from a subset of
bpf_attach_types to one bpf_prog_type (e.g., see BPF_PROG_TYPE_SK_SKB or
BPF_PROG_TYPE_CGROUP_SOCK). In this case, though, we have three different
program types (KPROBE, TRACEPOINT, PERF_EVENT) using the same perf_event-based
mechanism, so it's many bpf_prog_types to one bpf_attach_type. I chose to
define a single BPF_PERF_EVENT attach type for all of them and adjust
link_create()'s logic for checking correspondence between attach type and
program type.
The alternative would be to define three new attach types (e.g., BPF_KPROBE,
BPF_TRACEPOINT, and BPF_PERF_EVENT), but that seemed like unnecessary overkill
and BPF_KPROBE will cause naming conflicts with BPF_KPROBE() macro, defined by
libbpf. I chose to not do this to avoid unnecessary proliferation of
bpf_attach_type enum values and not have to deal with naming conflicts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-5-andrii@kernel.org
Currently weak typeless ksyms have default value zero, when they don't
exist in the kernel. However, weak typed ksyms are rejected by libbpf
if they can not be resolved. This means that if a bpf object contains
the declaration of a nonexistent weak typed ksym, it will be rejected
even if there is no program that references the symbol.
Nonexistent weak typed ksyms can also default to zero just like
typeless ones. This allows programs that access weak typed ksyms to be
accepted by verifier, if the accesses are guarded. For example,
extern const int bpf_link_fops3 __ksym __weak;
/* then in BPF program */
if (&bpf_link_fops3) {
/* use bpf_link_fops3 */
}
If actual use of nonexistent typed ksym is not guarded properly,
verifier would see that register is not PTR_TO_BTF_ID and wouldn't
allow to use it for direct memory reads or passing it to BPF helpers.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210812003819.2439037-1-haoluo@google.com
Use "code-block: none" instead of "c" for non-C-language code blocks.
Removes these warnings:
lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:111: WARNING: Could not lex literal_block as "c". Highlighting skipped.
lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:124: WARNING: Could not lex literal_block as "c". Highlighting skipped.
Fixes: f42cfb469f9b ("bpf: Add documentation for libbpf including API autogen")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210802015037.787-1-rdunlap@infradead.org
Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
Note, the LACPDU state frames still will be sent when init or unbind port.
v2: remove module parameter
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel docs from Documentation/bpf/libbpf go straight to docs/ under libbpf.
Also ignore libbpf-only parts of docs subdir.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This adds documentation files, including ones for autogenerating API
documentation based on code comments in the source code that's pulled
in via the mirror.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
When new eBPF program, map, or attach types are added to the kernel,
bpftool needs to be updated in order to support the related features.
These updates should add the new types to the code itself, but also to
the help messages, documentation, and bash completion. Given that it is
easy to omit one of those, a script has been created to attempt to
validate that all parts have been consistently updated.
This new script for bpftool is hosted in the kernel repository, amongst
the BPF selftests. But it is not called from the Makefile, and not run
along with the other selftests. If it was, all patches updating the BPF
UAPI would require the relevant changes in bpftool at the same time, _in
the same patches_, which is not desirable.
To ensure that bpftool's parts remain in sync, let's run this script
from the CI. This patch adds a new section to the run.sh script, focused
on bpftool, and calling the new test_bpftool_synctypes.py.
Makefile needs relo_core object added to objects list to avoid static
linking errors when doing static compilation:
/bin/ld: .../libbpf.a(libbpf.o): in function `bpf_core_apply_relo':
.../libbpf/src/libbpf.c:5134: undefined reference to `bpf_core_apply_relo_insn'
Signed-off-by: Rafael David Tinoco <rafaeldtinoco@gmail.com>
Only keep stderr output in case of errors for kernel and selftests builds.
Having a multi-thousand-line output isn't useful and slows down Github
Actions' log view UI.
Also quiet down wget's "progress bar" output. While at the same time see some
totals from tar, just for the fun of it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Makefile needs relo_core object added to objects list to avoid static
linking errors when doing static compilation:
/bin/ld: .../libbpf.a(libbpf.o): in function `bpf_core_apply_relo':
.../libbpf/src/libbpf.c:5134: undefined reference to `bpf_core_apply_relo_insn'
Signed-off-by: Rafael David Tinoco <rafaeldtinoco@gmail.com>
Only keep stderr output in case of errors for kernel and selftests builds.
Having a multi-thousand-line output isn't useful and slows down Github
Actions' log view UI.
Also quiet down wget's "progress bar" output. While at the same time see some
totals from tar, just for the fun of it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Before this patch, btf_new() was liable to close an arbitrary FD 0 if
BTF parsing failed. This was because:
* btf->fd was initialized to 0 through the calloc()
* btf__free() (in the `done` label) closed any FDs >= 0
* btf->fd is left at 0 if parsing fails
This issue was discovered on a system using libbpf v0.3 (without
BTF_KIND_FLOAT support) but with a kernel that had BTF_KIND_FLOAT types
in BTF. Thus, parsing fails.
While this patch technically doesn't fix any issues b/c upstream libbpf
has BTF_KIND_FLOAT support, it'll help prevent issues in the future if
more BTF types are added. It also allow the fix to be backported to
older libbpf's.
Fixes: 3289959b97ca ("libbpf: Support BTF loading and raw data output in both endianness")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/5969bb991adedb03c6ae93e051fd2a00d293cf25.1627513670.git.dxu@dxuuu.xyz
Add two new APIs: btf__load_vmlinux_btf and btf__load_module_btf.
btf__load_vmlinux_btf is just an alias to the existing API named
libbpf_find_kernel_btf, rename to be more precisely and consistent
with existing BTF APIs. btf__load_module_btf can be used to load
module BTF, add it for completeness. These two APIs are useful for
implementing tracing tools and introspection tools. This is part
of the effort towards libbpf 1.0 ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/280
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730114012.494408-1-hengqi.chen@gmail.com
Variable "err" is initialised to -EINVAL so that this error code is
returned when something goes wrong in libbpf_find_prog_btf_id().
However, a recent change in the function made use of the variable in
such a way that it is set to 0 if retrieving linear information on the
program is successful, and this 0 value remains if we error out on
failures at later stages.
Let's fix this by setting err to -EINVAL later in the function.
Fixes: e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level APIs")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210729162028.29512-2-quentin@isovalent.com
When loading in parallel multiple programs which use the same to-be
pinned map, it is possible that two instances of the loader will call
bpf_object__create_maps() at the same time. If the map doesn't exist
when both instances call bpf_object__reuse_map(), then one of the
instances will fail with EEXIST when calling bpf_map__pin().
Fix the race by retrying reusing a map if bpf_map__pin() returns
EEXIST. The fix is similar to the one in iproute2: e4c4685fd6e4 ("bpf:
Fix race condition with map pinning").
Before retrying the pinning, we don't do any special cleaning of an
internal map state. The closer code inspection revealed that it's not
required:
- bpf_object__create_map(): map->inner_map is destroyed after a
successful call, map->fd is closed if pinning fails.
- bpf_object__populate_internal_map(): created map elements is
destroyed upon close(map->fd).
- init_map_slots(): slots are freed after their initialization.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210726152001.34845-1-m@lambda.lt
github action grouping is broken because we were outputing "::endgroup" where
it needs "::endgroup::". This patch also added some addtional grouping around
contianer setup phase, making output easier to read.
When retrieving the enum value associated with typed data during
"is data zero?" checking in btf_dump_type_data_check_zero(), the
return value of btf_dump_get_enum_value() is not passed to the caller
if the function returns a non-zero (error) value. Currently, 0
is returned if the function returns an error. We should instead
propagate the error to the caller.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-4-git-send-email-alan.maguire@oracle.com
__int128 is not supported for some 32-bit platforms (arm and i386).
__int128 was used in carrying out computations on bitfields which
aid display, but the same calculations could be done with __u64
with the small effect of not supporting 128-bit bitfields.
With these changes, a big-endian issue with casting 128-bit integers
to 64-bit for enum bitfields is solved also, as we now use 64-bit
integers for bitfield calculations.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-2-git-send-email-alan.maguire@oracle.com
commit a82a66e ("Extend build and add install rules to Makefile") adds
special handling for LIBSUBDIR on x86_64. Expand this to all
architectures with 64 in name which suggests a 32bit variant exists, and
s390x which is 64bit extension of s390.
Fixes: #337
Fixes: a82a66e ("Extend build and add install rules to Makefile")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
If creating an outer map of a BTF-defined map-in-map fails (via
bpf_object__create_map()), then the previously created its inner map
won't be destroyed.
Fix this by ensuring that the destroy routines are not bypassed in the
case of a failure.
Fixes: 646f02ffdd49c ("libbpf: Add BTF-defined map-in-map support")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210719173838.423148-2-m@lambda.lt
__s64 can be defined as either long or long long, depending on the
architecture. On ppc64le it's defined as long, giving this error:
In file included from btf_dump.c:22:
btf_dump.c: In function 'btf_dump_type_data_check_overflow':
libbpf_internal.h:111:22: error: format '%lld' expects argument of
type 'long long int', but argument 3 has type '__s64' {aka 'long int'}
[-Werror=format=]
111 | libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~
libbpf_internal.h:114:27: note: in expansion of macro '__pr'
114 | #define pr_warn(fmt, ...) __pr(LIBBPF_WARN, fmt, ##__VA_ARGS__)
| ^~~~
btf_dump.c:1992:3: note: in expansion of macro 'pr_warn'
1992 | pr_warn("unexpected size [%lld] for id [%u]\n",
| ^~~~~~~
btf_dump.c:1992:32: note: format string is defined here
1992 | pr_warn("unexpected size [%lld] for id [%u]\n",
| ~~~^
| |
| long long int
| %ld
Cast to size_t and use %zu instead.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626475617-25984-3-git-send-email-alan.maguire@oracle.com
If data is packed, data structures can store it outside of usual
boundaries. For example a 4-byte int can be stored on a unaligned
boundary in a case like this:
struct s {
char f1;
int f2;
} __attribute((packed));
...the int is stored at an offset of one byte. Some platforms have
problems dereferencing data that is not aligned with its size, and
code exists to handle most cases of this for BTF typed data display.
However pointer display was missed, and a simple function to test if
"ptr_is_aligned(data, data_sz)" would help clarify this code.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626475617-25984-2-git-send-email-alan.maguire@oracle.com
Manjaro is a popular and friendly Arch based distro. Recently they also enabled the BTF support: https://forum.manjaro.org/t/co-re-support-in-kernel/46134/19
I can confirm that:
[user@pc ~]$ uname -a
Linux pc 5.12.16-1-MANJARO #1 SMP PREEMPT Sun Jul 11 13:23:34 UTC 2021 x86_64 GNU/Linux
[user@pc ~]$ ls -la /sys/kernel/btf/vmlinux
-r--r--r-- 1 root root 4226769 jul 17 15.27 /sys/kernel/btf/vmlinux
Add few new selftests to blacklist. They can't succeed on 5.5.
Also temporarily remove btf_dump for 4.9 due to newly added data dumping
subtests.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Temporary disable tc_bpf tests that seem to have regressed.
Temporary and artificially bump pahole version from 1.21 to 1.22 to get
per-CPU BTF data built.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
We used to have it disabled for GCC8, but now GCC10 is false-report same
warnings, so disable stringop-truncation warnigs for GCC10 as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This is necessary to make runqslower compile with task->__state field on old
kernels, for which we don't have an actual vmlinux.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a BTF dumper for typed data, so that the user can dump a typed
version of the data provided.
The API is
int btf_dump__dump_type_data(struct btf_dump *d, __u32 id,
void *data, size_t data_sz,
const struct btf_dump_type_data_opts *opts);
...where the id is the BTF id of the data pointed to by the "void *"
argument; for example the BTF id of "struct sk_buff" for a
"struct skb *" data pointer. Options supported are
- a starting indent level (indent_lvl)
- a user-specified indent string which will be printed once per
indent level; if NULL, tab is chosen but any string <= 32 chars
can be provided.
- a set of boolean options to control dump display, similar to those
used for BPF helper bpf_snprintf_btf(). Options are
- compact : omit newlines and other indentation
- skip_names: omit member names
- emit_zeroes: show zero-value members
Default output format is identical to that dumped by bpf_snprintf_btf(),
for example a "struct sk_buff" representation would look like this:
struct sk_buff){
(union){
(struct){
.next = (struct sk_buff *)0xffffffffffffffff,
.prev = (struct sk_buff *)0xffffffffffffffff,
(union){
.dev = (struct net_device *)0xffffffffffffffff,
.dev_scratch = (long unsigned int)18446744073709551615,
},
},
...
If the data structure is larger than the *data_sz*
number of bytes that are available in *data*, as much
of the data as possible will be dumped and -E2BIG will
be returned. This is useful as tracers will sometimes
not be able to capture all of the data associated with
a type; for example a "struct task_struct" is ~16k.
Being able to specify that only a subset is available is
important for such cases. On success, the amount of data
dumped is returned.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626362126-27775-2-git-send-email-alan.maguire@oracle.com
kprobes can be placed on most instructions in a function, not
just entry, and ftrace and bpftrace support the function+offset
notification for probe placement. Adding parsing of func_name
into func+offset to bpf_program__attach_kprobe() allows the
user to specify
SEC("kprobe/bpf_fentry_test5+0x6")
...for example, and the offset can be passed to perf_event_open_probe()
to support kprobe attachment.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-8-jolsa@kernel.org
Adding bpf_program__attach_kprobe_opts that does the same
as bpf_program__attach_kprobe, but takes opts argument.
Currently opts struct holds just retprobe bool, but we will
add new field in following patch.
The function is not exported, so there's no need to add
size to the struct bpf_program_attach_kprobe_opts for now.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-7-jolsa@kernel.org
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_KPROBE programs,
so it's now possible to call bpf_get_func_ip from both kprobe and
kretprobe programs.
Taking the caller's address from 'struct kprobe::addr', which is
defined for both kprobe and kretprobe.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-5-jolsa@kernel.org
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_TRACING programs,
specifically for all trampoline attach types.
The trampoline's caller IP address is stored in (ctx - 8) address.
so there's no reason to actually call the helper, but rather fixup
the call instruction and return [ctx - 8] value directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-4-jolsa@kernel.org
Introduce 'struct bpf_timer { __u64 :64; __u64 :64; };' that can be embedded
in hash/array/lru maps as a regular field and helpers to operate on it:
// Initialize the timer.
// First 4 bits of 'flags' specify clockid.
// Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, int flags);
// Configure the timer to call 'callback_fn' static function.
long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn);
// Arm the timer to expire 'nsec' nanoseconds from the current time.
long bpf_timer_start(struct bpf_timer *timer, u64 nsec, u64 flags);
// Cancel the timer and wait for callback_fn to finish if it was running.
long bpf_timer_cancel(struct bpf_timer *timer);
Here is how BPF program might look like:
struct map_elem {
int counter;
struct bpf_timer timer;
};
struct {
__uint(type, BPF_MAP_TYPE_HASH);
__uint(max_entries, 1000);
__type(key, int);
__type(value, struct map_elem);
} hmap SEC(".maps");
static int timer_cb(void *map, int *key, struct map_elem *val);
/* val points to particular map element that contains bpf_timer. */
SEC("fentry/bpf_fentry_test1")
int BPF_PROG(test1, int a)
{
struct map_elem *val;
int key = 0;
val = bpf_map_lookup_elem(&hmap, &key);
if (val) {
bpf_timer_init(&val->timer, &hmap, CLOCK_REALTIME);
bpf_timer_set_callback(&val->timer, timer_cb);
bpf_timer_start(&val->timer, 1000 /* call timer_cb2 in 1 usec */, 0);
}
}
This patch adds helper implementations that rely on hrtimers
to call bpf functions as timers expire.
The following patches add necessary safety checks.
Only programs with CAP_BPF are allowed to use bpf_timer.
The amount of timers used by the program is constrained by
the memcg recorded at map creation time.
The bpf_timer_init() helper needs explicit 'map' argument because inner maps
are dynamic and not known at load time. While the bpf_timer_set_callback() is
receiving hidden 'aux->prog' argument supplied by the verifier.
The prog pointer is needed to do refcnting of bpf program to make sure that
program doesn't get freed while the timer is armed. This approach relies on
"user refcnt" scheme used in prog_array that stores bpf programs for
bpf_tail_call. The bpf_timer_set_callback() will increment the prog refcnt which is
paired with bpf_timer_cancel() that will drop the prog refcnt. The
ops->map_release_uref is responsible for cancelling the timers and dropping
prog refcnt when user space reference to a map reaches zero.
This uref approach is done to make sure that Ctrl-C of user space process will
not leave timers running forever unless the user space explicitly pinned a map
that contained timers in bpffs.
bpf_timer_init() and bpf_timer_set_callback() will return -EPERM if map doesn't
have user references (is not held by open file descriptor from user space and
not pinned in bpffs).
The bpf_map_delete_elem() and bpf_map_update_elem() operations cancel
and free the timer if given map element had it allocated.
"bpftool map update" command can be used to cancel timers.
The 'struct bpf_timer' is explicitly __attribute__((aligned(8))) because
'__u64 :64' has 1 byte alignment of 8 byte padding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-4-alexei.starovoitov@gmail.com
When loading a BPF program with a pinned map, the loader checks whether
the pinned map can be reused, i.e. their properties match. To derive
such of the pinned map, the loader invokes BPF_OBJ_GET_INFO_BY_FD and
then does the comparison.
Unfortunately, on < 4.12 kernels the BPF_OBJ_GET_INFO_BY_FD is not
available, so loading the program fails with the following error:
libbpf: failed to get map info for map FD 5: Invalid argument
libbpf: couldn't reuse pinned map at
'/sys/fs/bpf/tc/globals/cilium_call_policy': parameter
mismatch"
libbpf: map 'cilium_call_policy': error reusing pinned map
libbpf: map 'cilium_call_policy': failed to create:
Invalid argument(-22)
libbpf: failed to load object 'bpf_overlay.o'
To fix this, fallback to derivation of the map properties via
/proc/$PID/fdinfo/$MAP_FD if BPF_OBJ_GET_INFO_BY_FD fails with EINVAL,
which can be used as an indicator that the kernel doesn't support
the latter.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210712125552.58705-1-m@lambda.lt
The update to streamline libbpf error reporting intended to change all
functions to return the errno as a negative return value if
LIBBPF_STRICT_DIRECT_ERRS is set. However, if the flag is *not* set, the
return value changes for the two functions that were already returning a
negative errno unconditionally: bpf_link__unpin() and perf_buffer__poll().
This is a user-visible API change that breaks applications; so let's revert
these two functions back to unconditionally returning a negative errno
value.
Fixes: e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level APIs")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210706122355.236082-1-toke@redhat.com
Netlink helpers I added in 8bbb77b7c7a2 ("libbpf: Add various netlink
helpers") used char * casts everywhere, and there were a few more that
existed from before.
Convert all of them to void * cast, as it is treated equivalently by
clang/gcc for the purposes of pointer arithmetic and to follow the
convention elsewhere in the kernel/libbpf.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210619041454.417577-2-memxor@gmail.com
Coverity complains about OOB writes to nlmsghdr. There is no OOB as we
write to the trailing buffer, but static analyzers and compilers may
rightfully be confused as the nlmsghdr pointer has subobject provenance
(and hence subobject bounds).
Fix this by using an explicit request structure containing the nlmsghdr,
struct tcmsg/ifinfomsg, and attribute buffer.
Also switch nh_tail (renamed to req_tail) to cast req * to char * so
that it can be understood as arithmetic on pointer to the representation
array (hence having same bound as request structure), which should
further appease analyzers.
As a bonus, callers don't have to pass sizeof(req) all the time now, as
size is implicitly obtained using the pointer. While at it, also reduce
the size of attribute buffer to 128 bytes (132 for ifinfomsg using
functions due to the padding).
Summary of problem:
Even though C standard allows interconvertibility of pointer to first
member and pointer to struct, for the purposes of alias analysis it
would still consider the first as having pointer value "pointer to T"
where T is type of first member hence having subobject bounds,
allowing analyzers within reason to complain when object is accessed
beyond the size of pointed to object.
The only exception to this rule may be when a char * is formed to a
member subobject. It is not possible for the compiler to be able to
tell the intent of the programmer that it is a pointer to member
object or the underlying representation array of the containing
object, so such diagnosis is suppressed.
Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210619041454.417577-1-memxor@gmail.com
Let us sync linux/{pkt_cls.h,pkt_sched.h} to libbpf repo.
Otherwise, on ubuntu 16.04, system headers will be picked up
and this will result in compilation error like:
.../netlink.c:416:23: error: ‘TC_H_CLSACT’ undeclared (first use in this function)
*parent = TC_H_MAKE(TC_H_CLSACT,
^
.../netlink.c:418:9: error: ‘TC_H_MIN_INGRESS’ undeclared (first use in this function)
TC_H_MIN_INGRESS : TC_H_MIN_EGRESS);
^
.../netlink.c:418:28: error: ‘TC_H_MIN_EGRESS’ undeclared (first use in this function)
TC_H_MIN_INGRESS : TC_H_MIN_EGRESS);
^
.../netlink.c: In function ‘__get_tc_info’:
.../netlink.c:522:11: error: ‘TCA_BPF_ID’ undeclared (first use in this function)
if (!tbb[TCA_BPF_ID])
^
Signed-off-by: Yonghong Song <yhs@fb.com>
Make sure we run all of the tests even if some of them fail. This allows to
test all of them independently, especially kernel LATEST slow test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This patch is meant to start the initiative to document libbpf.
It includes .rst files which are text documentation describing building,
API naming convention, as well as an index to generated API documentation.
In this approach the generated API documentation is enabled by the kernels
existing kernel documentation system which uses sphinx. The resulting docs
would then be synced to kernel.org/doc
You can test this by running `make htmldocs` and serving the html in
Documentation/output. Since libbpf does not yet have comments in kernel
doc format, see kernel.org/doc/html/latest/doc-guide/kernel-doc.html for
an example so you can test this.
The advantage of this approach is to use the existing sphinx
infrastructure that the kernel has, and have libbpf docs in
the same place as everything else.
The current plan is to have the libbpf mirror sync the generated docs
and version them based on the libbpf releases which are cut on github.
This patch includes the addition of libbpf_api.rst which pulls comment
documentation from header files in libbpf under tools/lib/bpf/. The comment
docs would be of the standard kernel doc format.
Signed-off-by: grantseltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210618140459.9887-2-grantseltzer@gmail.com
bpf2go is the Go equivalent of libbpf skeleton. The convention is that
the compiled BPF is checked into the repository to facilitate distributing
BPF as part of Go packages. To make this portable, bpf2go by default
generates both bpfel and bpfeb variants of the C.
Using bpf_tracing.h is inherently non-portable since the fields of
struct pt_regs differ between platforms, so CO-RE can't help us here.
The only way of working around this is to compile for each target
platform independently. bpf2go can't do this by default since there
are too many platforms.
Define the various PT_... macros when no target can be determined and
turn them into compilation failures. This works because bpf2go always
compiles for bpf targets, so the compiler fallback doesn't kick in.
Conditionally define __BPF_MISSING_TARGET so that we can inject a
more appropriate error message at build time. The user can then
choose which platform to target explicitly.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210616083635.11434-1-lmb@cloudflare.com
This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT
to check if the attached eBPF program is capable of migrating sockets. When
the eBPF program is attached, we run it for socket migration if the
expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or
net.ipv4.tcp_migrate_req is enabled.
Currently, the expected_attach_type is not enforced for the
BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the
earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to
fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type().
Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to
select a new listener based on the child socket. migrating_sk varies
depending on if it is migrating a request in the accept queue or during
3WHS.
- accept_queue : sock (ESTABLISHED/SYN_RECV)
- 3WHS : request_sock (NEW_SYN_RECV)
In the eBPF program, we can select a new listener by
BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning
SK_DROP. This feature is useful when listeners have different settings at
the socket API level or when we want to free resources as soon as possible.
- SK_PASS with selected_sk, select it as a new listener
- SK_PASS with selected_sk NULL, fallbacks to the random selection
- SK_DROP, cancel the migration.
There is a noteworthy point. We select a listening socket in three places,
but we do not have struct skb at closing a listener or retransmitting a
SYN+ACK. On the other hand, some helper functions do not expect skb is NULL
(e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer()
in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb
temporarily before running the eBPF program.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
When calling xsk_socket__create_shared(), the logic at line 1097 marks a
boolean flag true within the xsk_umem structure to track setup progress
in order to support multiple calls to the function. However, instead of
marking umem->tx_ring_setup_done, the code incorrectly sets
umem->rx_ring_setup_done. This leads to improper behaviour when
creating and destroying xsk and umem structures.
Multiple calls to this function is documented as supported.
Fixes: ca7a83e2487a ("libbpf: Only create rx and tx XDP rings when necessary")
Signed-off-by: Kev Jackson <foamdino@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/YL4aU4f3Aaik7CN0@linux-dev
These macros are convenient wrappers around the bpf_seq_printf and
bpf_snprintf helpers. They are currently provided by bpf_tracing.h which
targets low level tracing primitives. bpf_helpers.h is a better fit.
The __bpf_narg and __bpf_apply are needed in both files and provided
twice. __bpf_empty isn't used anywhere and is removed from bpf_tracing.h
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210526164643.2881368-1-revest@chromium.org
This patch adds two flags BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS to
extend xdp_redirect_map for broadcast support.
With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces
in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be
excluded when do broadcasting.
When getting the devices in dev hash map via dev_map_hash_get_next_key(),
there is a possibility that we fall back to the first key when a device
was removed. This will duplicate packets on some interfaces. So just walk
the whole buckets to avoid this issue. For dev array map, we also walk the
whole map to find valid interfaces.
Function bpf_clear_redirect_map() was removed in
commit ee75aef23afe ("bpf, xdp: Restructure redirect actions").
Add it back as we need to use ri->map again.
With test topology:
+-------------------+ +-------------------+
| Host A (i40e 10G) | ---------- | eno1(i40e 10G) |
+-------------------+ | |
| Host B |
+-------------------+ | |
| Host C (i40e 10G) | ---------- | eno2(i40e 10G) |
+-------------------+ | |
| +------+ |
| veth0 -- | Peer | |
| veth1 -- | | |
| veth2 -- | NS | |
| +------+ |
+-------------------+
On Host A:
# pktgen/pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -s 64
On Host B(Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz, 128G Memory):
Use xdp_redirect_map and xdp_redirect_map_multi in samples/bpf for testing.
All the veth peers in the NS have a XDP_DROP program loaded. The
forward_map max_entries in xdp_redirect_map_multi is modify to 4.
Testing the performance impact on the regular xdp_redirect path with and
without patch (to check impact of additional check for broadcast mode):
5.12 rc4 | redirect_map i40e->i40e | 2.0M | 9.7M
5.12 rc4 | redirect_map i40e->veth | 1.7M | 11.8M
5.12 rc4 + patch | redirect_map i40e->i40e | 2.0M | 9.6M
5.12 rc4 + patch | redirect_map i40e->veth | 1.7M | 11.7M
Testing the performance when cloning packets with the redirect_map_multi
test, using a redirect map size of 4, filled with 1-3 devices:
5.12 rc4 + patch | redirect_map multi i40e->veth (x1) | 1.7M | 11.4M
5.12 rc4 + patch | redirect_map multi i40e->veth (x2) | 1.1M | 4.3M
5.12 rc4 + patch | redirect_map multi i40e->veth (x3) | 0.8M | 2.6M
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-3-liuhangbin@gmail.com
Implement changes to error reporting for high-level libbpf APIs to make them
less surprising and less error-prone to users:
- in all the cases when error happens, errno is set to an appropriate error
value;
- in libbpf 1.0 mode, all pointer-returning APIs return NULL on error and
error code is communicated through errno; this applies both to APIs that
already returned NULL before (so now they communicate more detailed error
codes), as well as for many APIs that used ERR_PTR() macro and encoded
error numbers as fake pointers.
- in legacy (default) mode, those APIs that were returning ERR_PTR(err),
continue doing so, but still set errno.
With these changes, errno can be always used to extract actual error,
regardless of legacy or libbpf 1.0 modes. This is utilized internally in
libbpf in places where libbpf uses it's own high-level APIs.
libbpf_get_error() is adapted to handle both cases completely transparently to
end-users (and is used by libbpf consistently as well).
More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).
[0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-5-andrii@kernel.org
Add libbpf_set_strict_mode() API that allows application to simulate libbpf
1.0 breaking changes before libbpf 1.0 is released. This will help users
migrate gradually and with confidence.
For now only ALL or NONE options are available, subsequent patches will add
more flags. This patch is preliminary for selftests/bpf changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-2-andrii@kernel.org
I'm getting the following error when running 'gen skeleton -L' as
regular user:
libbpf: Error in bpf_object__probe_loading():Operation not permitted(1).
Couldn't load trivial BPF program. Make sure your kernel supports BPF
(CONFIG_BPF_SYSCALL=y) and/or that RLIMIT_MEMLOCK is set to big enough
value.
Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210521030653.2626513-1-sdf@google.com
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
In order to be able to generate loader program in the later
patches change the order of data and text relocations.
Also improve the test to include data relos.
If the kernel supports "FD array" the map_fd relocations can be processed
before text relos since generated loader program won't need to manually
patch ld_imm64 insns with map_fd.
But ksym and kfunc relocations can only be processed after all calls
are relocated, since loader program will consist of a sequence
of calls to bpf_btf_find_by_name_kind() followed by patching of btf_id
and btf_obj_fd into corresponding ld_imm64 insns. The locations of those
ld_imm64 insns are specified in relocations.
Hence process all data relocations (maps, ksym, kfunc) together after call relos.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-12-alexei.starovoitov@gmail.com
Add new helper:
long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags)
Description
Find BTF type with given name and kind in vmlinux BTF or in module's BTFs.
Return
Returns btf_id and btf_obj_fd in lower and upper 32 bits.
It will be used by loader program to find btf_id to attach the program to
and to find btf_ids of ksyms.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-10-alexei.starovoitov@gmail.com
Typical program loading sequence involves creating bpf maps and applying
map FDs into bpf instructions in various places in the bpf program.
This job is done by libbpf that is using compiler generated ELF relocations
to patch certain instruction after maps are created and BTFs are loaded.
The goal of fd_idx is to allow bpf instructions to stay immutable
after compilation. At load time the libbpf would still create maps as usual,
but it wouldn't need to patch instructions. It would store map_fds into
__u32 fd_array[] and would pass that pointer to sys_bpf(BPF_PROG_LOAD).
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-9-alexei.starovoitov@gmail.com
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
