Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Previously, re-using pinned DEVMAP maps would always fail, because
get_map_info on a DEVMAP always returns flags with BPF_F_RDONLY_PROG set,
but BPF_F_RDONLY_PROG being set on a map during creation is invalid.
Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
get_map_info when checking for compatibility with an existing DEVMAP.
The same problem is handled in a third-party ebpf library:
- https://github.com/cilium/ebpf/issues/925
- https://github.com/cilium/ebpf/pull/930
Fixes: 0cdbb4b09a06 ("devmap: Allow map lookups from eBPF")
Signed-off-by: Yureka Lilian <yuka@yuka.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814180113.1245565-3-yuka@yuka.dev
Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Though mod_len is only read when mod_name != NULL and both are initialized
together, gcc15 produces a warning with -Werror=maybe-uninitialized:
libbpf.c: In function 'find_kernel_btf_id.constprop':
libbpf.c:10100:33: error: 'mod_len' may be used uninitialized [-Werror=maybe-uninitialized]
10100 | if (mod_name && strncmp(mod->name, mod_name, mod_len) != 0)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libbpf.c:10070:21: note: 'mod_len' was declared here
10070 | int ret, i, mod_len;
| ^~~~~~~
Silence the false positive.
Signed-off-by: Achill Gilgenast <fossdd@pwned.life>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250729094611.2065713-1-fossdd@pwned.life
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch provides a setsockopt method to let applications leverage to
adjust how many descs to be handled at most in one send syscall. It
mitigates the situation where the default value (32) that is too small
leads to higher frequency of triggering send syscall.
Considering the prosperity/complexity the applications have, there is no
absolutely ideal suggestion fitting all cases. So keep 32 as its default
value like before.
The patch does the following things:
- Add XDP_MAX_TX_SKB_BUDGET socket option.
- Set max_tx_budget to 32 by default in the initialization phase as a
per-socket granular control.
- Set the range of max_tx_budget as [32, xs->tx->nentries].
The idea behind this comes out of real workloads in production. We use a
user-level stack with xsk support to accelerate sending packets and
minimize triggering syscalls. When the packets are aggregated, it's not
hard to hit the upper bound (namely, 32). The moment user-space stack
fetches the -EAGAIN error number passed from sendto(), it will loop to try
again until all the expected descs from tx ring are sent out to the driver.
Enlarging the XDP_MAX_TX_SKB_BUDGET value contributes to less frequency of
sendto() and higher throughput/PPS.
Here is what I did in production, along with some numbers as follows:
For one application I saw lately, I suggested using 128 as max_tx_budget
because I saw two limitations without changing any default configuration:
1) XDP_MAX_TX_SKB_BUDGET, 2) socket sndbuf which is 212992 decided by
net.core.wmem_default. As to XDP_MAX_TX_SKB_BUDGET, the scenario behind
this was I counted how many descs are transmitted to the driver at one
time of sendto() based on [1] patch and then I calculated the
possibility of hitting the upper bound. Finally I chose 128 as a
suitable value because 1) it covers most of the cases, 2) a higher
number would not bring evident results. After twisting the parameters,
a stable improvement of around 4% for both PPS and throughput and less
resources consumption were found to be observed by strace -c -p xxx:
1) %time was decreased by 7.8%
2) error counter was decreased from 18367 to 572
[1]: https://lore.kernel.org/all/20250619093641.70700-1-kerneljasonxing@gmail.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250704160138.48677-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a description for current oss-fuzz setup and write down the
commands needed to reproduce fuzzer reported errors:
- "Official way" in case exact oss-fuzz environment is necessary.
- "Simple way" for local tinkering.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
This simplifies local reproduction of fuzzer reported errors.
E.g. the following sequence of commands would execute much faster on a
second run:
$ SKIP_LIBELF_REBUILD=1 scripts/build-fuzzers.sh
$ out/bpf-object-fuzzer <path-to-test-case>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Initial __arena global variable support implementation in libbpf
contains a bug: it remembers struct bpf_map pointer for arena, which is
used later on to process relocations. Recording this pointer is
problematic because map pointers are not stable during ELF relocation
collection phase, as an array of struct bpf_map's can be reallocated,
invalidating all the pointers. Libbpf is dealing with similar issues by
using a stable internal map index, though for BPF arena map specifically
this approach wasn't used due to an oversight.
The resulting behavior is non-deterministic issue which depends on exact
layout of ELF object file, number of actual maps, etc. We didn't hit
this until very recently, when this bug started triggering crash in BPF
CI when validating one of sched-ext BPF programs.
The fix is rather straightforward: we just follow an established pattern
of remembering map index (just like obj->kconfig_map_idx, for example)
instead of `struct bpf_map *`, and resolving index to a pointer at the
point where map information is necessary.
While at it also add debug-level message for arena-related relocation
resolution information, which we already have for all other kinds of
maps.
Fixes: 2e7ba4f8fd1f ("libbpf: Recognize __arena global variables.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250718001009.610955-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When compiling libbpf with some compilers, this warning is triggered:
libbpf.c: In function ‘bpf_object__gen_loader’:
libbpf.c:9209:28: error: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
9209 | gen = calloc(sizeof(*gen), 1);
| ^
libbpf.c:9209:28: note: earlier argument should specify number of elements, later size of each element
Fix this by inverting the calloc() arguments.
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250717200337.49168-1-technoboy85@gmail.com
The 'commit 35f96de04127 ("bpf: Introduce BPF token object")' added
BPF token as a new kind of BPF kernel object. And BPF_OBJ_GET_INFO_BY_FD
already used to get BPF object info, so we can also get token info with
this cmd.
One usage scenario, when program runs failed with token, because of
the permission failure, we can report what BPF token is allowing with
this API for debugging.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250716134654.1162635-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for a stream API to the kernel and expose related kfuncs to
BPF programs. Two streams are exposed, BPF_STDOUT and BPF_STDERR. These
can be used for printing messages that can be consumed from user space,
thus it's similar in spirit to existing trace_pipe interface.
The kernel will use the BPF_STDERR stream to notify the program of any
errors encountered at runtime. BPF programs themselves may use both
streams for writing debug messages. BPF library-like code may use
BPF_STDERR to print warnings or errors on misuse at runtime.
The implementation of a stream is as follows. Everytime a message is
emitted from the kernel (directly, or through a BPF program), a record
is allocated by bump allocating from per-cpu region backed by a page
obtained using alloc_pages_nolock(). This ensures that we can allocate
memory from any context. The eventual plan is to discard this scheme in
favor of Alexei's kmalloc_nolock() [0].
This record is then locklessly inserted into a list (llist_add()) so
that the printing side doesn't require holding any locks, and works in
any context. Each stream has a maximum capacity of 4MB of text, and each
printed message is accounted against this limit.
Messages from a program are emitted using the bpf_stream_vprintk kfunc,
which takes a stream_id argument in addition to working otherwise
similar to bpf_trace_vprintk.
The bprintf buffer helpers are extracted out to be reused for printing
the string into them before copying it into the stream, so that we can
(with the defined max limit) format a string and know its true length
before performing allocations of the stream element.
For consuming elements from a stream, we expose a bpf(2) syscall command
named BPF_PROG_STREAM_READ_BY_FD, which allows reading data from the
stream of a given prog_fd into a user space buffer. The main logic is
implemented in bpf_stream_read(). The log messages are queued in
bpf_stream::log by the bpf_stream_vprintk kfunc, and then pulled and
ordered correctly in the stream backlog.
For this purpose, we hold a lock around bpf_stream_backlog_peek(), as
llist_del_first() (if we maintained a second lockless list for the
backlog) wouldn't be safe from multiple threads anyway. Then, if we
fail to find something in the backlog log, we splice out everything from
the lockless log, and place it in the backlog log, and then return the
head of the backlog. Once the full length of the element is consumed, we
will pop it and free it.
The lockless list bpf_stream::log is a LIFO stack. Elements obtained
using a llist_del_all() operation are in LIFO order, thus would break
the chronological ordering if printed directly. Hence, this batch of
messages is first reversed. Then, it is stashed into a separate list in
the stream, i.e. the backlog_log. The head of this list is the actual
message that should always be returned to the caller. All of this is
done in bpf_stream_backlog_fill().
From the kernel side, the writing into the stream will be a bit more
involved than the typical printk. First, the kernel typically may print
a collection of messages into the stream, and parallel writers into the
stream may suffer from interleaving of messages. To ensure each group of
messages is visible atomically, we can lift the advantage of using a
lockless list for pushing in messages.
To enable this, we add a bpf_stream_stage() macro, and require kernel
users to use bpf_stream_printk statements for the passed expression to
write into the stream. Underneath the macro, we have a message staging
API, where a bpf_stream_stage object on the stack accumulates the
messages being printed into a local llist_head, and then a commit
operation splices the whole batch into the stream's lockless log list.
This is especially pertinent for rqspinlock deadlock messages printed to
program streams. After this change, we see each deadlock invocation as a
non-interleaving contiguous message without any confusion on the
reader's part, improving their user experience in debugging the fault.
While programs cannot benefit from this staged stream writing API, they
could just as well hold an rqspinlock around their print statements to
serialize messages, hence this is kept kernel-internal for now.
Overall, this infrastructure provides NMI-safe any context printing of
messages to two dedicated streams.
Later patches will add support for printing splats in case of BPF arena
page faults, rqspinlock deadlocks, and cond_break timeouts, and
integration of this facility into bpftool for dumping messages to user
space.
[0]: https://lore.kernel.org/bpf/20250501032718.65476-1-alexei.starovoitov@gmail.com
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The `name` field in `obj->externs` points into the BTF data at initial
open time. However, some functions may invalidate this after opening and
before loading (e.g. `bpf_map__set_value_size`), which results in
pointers into freed memory and undefined behavior.
The simplest solution is to simply `strdup` these strings, similar to
the `essent_name`, and free them at the same time.
In order to test this path, the `global_map_resize` BPF selftest is
modified slightly to ensure the presence of an extern, which causes this
test to fail prior to the fix. Given there isn't an obvious API or error
to test against, I opted to add this to the existing test as an aspect
of the resizing feature rather than duplicate the test.
Fixes: 9d0a23313b1a ("libbpf: Add capability for resizing datasec maps")
Signed-off-by: Adin Scannell <amscanne@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250625050215.2777374-1-amscanne@meta.com
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250618011933.11423-1-chenyuan_fl@163.com
Adjust the sync script to handle UAPI header guards with singular and
double underscore between UAPI and LINUX. Kernel seems to have a mix of
both approaches.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
libbpf_err_ptr() helpers are meant to return NULL and set errno, if
there is an error. But btf_parse_raw_mmap() is meant to be used
internally and is expected to return ERR_PTR() values. Because of this
mismatch, when libbpf tries to mmap /sys/kernel/btf/vmlinux, we don't
detect the error correctly with IS_ERR() check, and never fallback to
old non-mmap-based way of loading vmlinux BTF.
Fix this by using proper ERR_PTR() returns internally.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 3c0421c93ce4 ("libbpf: Use mmap to parse vmlinux BTF from sysfs")
Cc: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250606202134.2738910-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sample file was renamed from trace_output_kern.c to
trace_output.bpf.c in commit d4fffba4d04b ("samples/bpf: Change _kern
suffix to .bpf with syscall tracing program"). Adjust the path in the
documentation comment for bpf_perf_event_output.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20250610140756.16332-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently libbpf supports bpf_program__attach_cgroup() with signature:
LIBBPF_API struct bpf_link *
bpf_program__attach_cgroup(const struct bpf_program *prog, int cgroup_fd);
To support mprog style attachment, additionsl fields like flags,
relative_{fd,id} and expected_revision are needed.
Add a new API:
LIBBPF_API struct bpf_link *
bpf_program__attach_cgroup_opts(const struct bpf_program *prog, int cgroup_fd,
const struct bpf_cgroup_opts *opts);
where bpf_cgroup_opts contains all above needed fields.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163146.2429212-1-yonghong.song@linux.dev
Current cgroup prog ordering is appending at attachment time. This is not
ideal. In some cases, users want specific ordering at a particular cgroup
level. To address this, the existing mprog API seems an ideal solution with
supporting BPF_F_BEFORE and BPF_F_AFTER flags.
But there are a few obstacles to directly use kernel mprog interface.
Currently cgroup bpf progs already support prog attach/detach/replace
and link-based attach/detach/replace. For example, in struct
bpf_prog_array_item, the cgroup_storage field needs to be together
with bpf prog. But the mprog API struct bpf_mprog_fp only has bpf_prog
as the member, which makes it difficult to use kernel mprog interface.
In another case, the current cgroup prog detach tries to use the
same flag as in attach. This is different from mprog kernel interface
which uses flags passed from user space.
So to avoid modifying existing behavior, I made the following changes to
support mprog API for cgroup progs:
- The support is for prog list at cgroup level. Cross-level prog list
(a.k.a. effective prog list) is not supported.
- Previously, BPF_F_PREORDER is supported only for prog attach, now
BPF_F_PREORDER is also supported by link-based attach.
- For attach, BPF_F_BEFORE/BPF_F_AFTER/BPF_F_ID/BPF_F_LINK is supported
similar to kernel mprog but with different implementation.
- For detach and replace, use the existing implementation.
- For attach, detach and replace, the revision for a particular prog
list, associated with a particular attach type, will be updated
by increasing count by 1.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163141.2428937-1-yonghong.song@linux.dev
The BTF dumper code currently displays arrays of characters as just that -
arrays, with each character formatted individually. Sometimes this is what
makes sense, but it's nice to be able to treat that array as a string.
This change adds a special case to the btf_dump functionality to allow
0-terminated arrays of single-byte integer values to be printed as
character strings. Characters for which isprint() returns false are
printed as hex-escaped values. This is enabled when the new ".emit_strings"
is set to 1 in the btf_dump_type_data_opts structure.
As an example, here's what it looks like to dump the string "hello" using
a few different field values for btf_dump_type_data_opts (.compact = 1):
- .emit_strings = 0, .skip_names = 0: (char[6])['h','e','l','l','o',]
- .emit_strings = 0, .skip_names = 1: ['h','e','l','l','o',]
- .emit_strings = 1, .skip_names = 0: (char[6])"hello"
- .emit_strings = 1, .skip_names = 1: "hello"
Here's the string "h\xff", dumped with .compact = 1 and .skip_names = 1:
- .emit_strings = 0: ['h',-1,]
- .emit_strings = 1: "h\xff"
Signed-off-by: Blake Jones <blakejones@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250603203701.520541-1-blakejones@google.com
libbpf handling of split BTF has been written largely with the
assumption that multiple splits are possible, i.e. split BTF on top of
split BTF on top of base BTF. One area where this does not quite work
is string handling in split BTF; the start string offset should be the
base BTF string section length + the base BTF string offset. This
worked in the past because for a single split BTF with base the start
string offset was always 0.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-2-alan.maguire@oracle.com
When applying a recent commit to the <uapi/linux/perf_event.h>
header I noticed that we have accumulated quite a bit of
historic noise in this header, so do a bit of spring cleaning:
- Define bitfields in a vertically aligned fashion, like
perf_event_mmap_page::capabilities already does. This
makes it easier to see the distribution and sizing of
bits within a word, at a glance. The following is much
more readable:
__u64 cap_bit0 : 1,
cap_bit0_is_deprecated : 1,
cap_user_rdpmc : 1,
cap_user_time : 1,
cap_user_time_zero : 1,
cap_user_time_short : 1,
cap_____res : 58;
Than:
__u64 cap_bit0:1,
cap_bit0_is_deprecated:1,
cap_user_rdpmc:1,
cap_user_time:1,
cap_user_time_zero:1,
cap_user_time_short:1,
cap_____res:58;
So convert all bitfield definitions from the latter style to the
former style.
- Fix typos and grammar
- Fix capitalization
- Remove whitespace noise
- Harmonize the definitions of various generations and groups of
PERF_MEM_ ABI values.
- Vertically align all definitions and assignments to the same
column (48), as the first definition (enum perf_type_id),
throughout the entire header.
- And in general make the code and comments to be more in sync
with each other and to be more readable overall.
No change in functionality.
Copy the changes over to tools/include/uapi/linux/perf_event.h.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250521221529.2547099-1-irogers@google.com
Normalize already synced UAPI headers. For all subsequent syncs this
will be done automatically by the sync script.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
It's expected that kernel UAPI headers have #ifndef guards starting with
__LINUX prefix, while in the kernel source code these guards are
actually starting with _UAPI__LINUX. The stripping of _UAPI prefix is
done (among other things) by kernel's scripts/headers_install.sh script.
Given libbpf vendors its own UAPI header under include/uapi subdir, and
those "internal" UAPI headers are sometimes used by libbpf users for
convenience, let's stick to the __LINUX prefix rule and do that during
the sync.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2025-06-13 13:18:23 -07:00
28 changed files with 891 additions and 419 deletions
* USDT is identified by it's <provider-name>:<probe-name> pair of names. Each
* USDT is identified by its <provider-name>:<probe-name> pair of names. Each
* individual USDT has a fixed number of arguments (3 in the above example)
* and specifies values of each argument as if it was a function call.
*
@@ -81,7 +81,7 @@
* NOP instruction that kernel can replace with an interrupt instruction to
* trigger instrumentation code (BPF program for all that we care about).
*
* Semaphore above is and optional feature. It records an address of a 2-byte
* Semaphore above is an optional feature. It records an address of a 2-byte
* refcount variable (normally in '.probes' ELF section) used for signaling if
* there is anything that is attached to USDT. This is useful for user
* applications if, for example, they need to prepare some arguments that are
@@ -121,7 +121,7 @@
* a uprobe BPF program (which for kernel, at least currently, is just a kprobe
* program, so BPF_PROG_TYPE_KPROBE program type). With the only difference
* that uprobe is usually attached at the function entry, while USDT will
* normally will be somewhere inside the function. But it should always be
* normally be somewhere inside the function. But it should always be
* pointing to NOP instruction, which makes such uprobes the fastest uprobe
* kind.
*
@@ -151,7 +151,7 @@
* libbpf sets to spec ID during attach time, or, if kernel is too old to
* support BPF cookie, through IP-to-spec-ID map that libbpf maintains in such
* case. The latter means that some modes of operation can't be supported
* without BPF cookie. Such mode is attaching to shared library "generically",
* without BPF cookie. Such a mode is attaching to shared library "generically",
* without specifying target process. In such case, it's impossible to
* calculate absolute IP addresses for IP-to-spec-ID map, and thus such mode
* is not supported without BPF cookie support.
@@ -185,7 +185,7 @@
* as even if USDT spec string is the same, USDT cookie value can be
* different. It was deemed excessive to try to deduplicate across independent
* USDT attachments by taking into account USDT spec string *and* USDT cookie
* value, which would complicated spec ID accounting significantly for little
* value, which would complicate spec ID accounting significantly for little
* gain.
*/
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
