Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Previously, re-using pinned DEVMAP maps would always fail, because
get_map_info on a DEVMAP always returns flags with BPF_F_RDONLY_PROG set,
but BPF_F_RDONLY_PROG being set on a map during creation is invalid.
Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
get_map_info when checking for compatibility with an existing DEVMAP.
The same problem is handled in a third-party ebpf library:
- https://github.com/cilium/ebpf/issues/925
- https://github.com/cilium/ebpf/pull/930
Fixes: 0cdbb4b09a06 ("devmap: Allow map lookups from eBPF")
Signed-off-by: Yureka Lilian <yuka@yuka.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814180113.1245565-3-yuka@yuka.dev
Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Though mod_len is only read when mod_name != NULL and both are initialized
together, gcc15 produces a warning with -Werror=maybe-uninitialized:
libbpf.c: In function 'find_kernel_btf_id.constprop':
libbpf.c:10100:33: error: 'mod_len' may be used uninitialized [-Werror=maybe-uninitialized]
10100 | if (mod_name && strncmp(mod->name, mod_name, mod_len) != 0)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libbpf.c:10070:21: note: 'mod_len' was declared here
10070 | int ret, i, mod_len;
| ^~~~~~~
Silence the false positive.
Signed-off-by: Achill Gilgenast <fossdd@pwned.life>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250729094611.2065713-1-fossdd@pwned.life
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch provides a setsockopt method to let applications leverage to
adjust how many descs to be handled at most in one send syscall. It
mitigates the situation where the default value (32) that is too small
leads to higher frequency of triggering send syscall.
Considering the prosperity/complexity the applications have, there is no
absolutely ideal suggestion fitting all cases. So keep 32 as its default
value like before.
The patch does the following things:
- Add XDP_MAX_TX_SKB_BUDGET socket option.
- Set max_tx_budget to 32 by default in the initialization phase as a
per-socket granular control.
- Set the range of max_tx_budget as [32, xs->tx->nentries].
The idea behind this comes out of real workloads in production. We use a
user-level stack with xsk support to accelerate sending packets and
minimize triggering syscalls. When the packets are aggregated, it's not
hard to hit the upper bound (namely, 32). The moment user-space stack
fetches the -EAGAIN error number passed from sendto(), it will loop to try
again until all the expected descs from tx ring are sent out to the driver.
Enlarging the XDP_MAX_TX_SKB_BUDGET value contributes to less frequency of
sendto() and higher throughput/PPS.
Here is what I did in production, along with some numbers as follows:
For one application I saw lately, I suggested using 128 as max_tx_budget
because I saw two limitations without changing any default configuration:
1) XDP_MAX_TX_SKB_BUDGET, 2) socket sndbuf which is 212992 decided by
net.core.wmem_default. As to XDP_MAX_TX_SKB_BUDGET, the scenario behind
this was I counted how many descs are transmitted to the driver at one
time of sendto() based on [1] patch and then I calculated the
possibility of hitting the upper bound. Finally I chose 128 as a
suitable value because 1) it covers most of the cases, 2) a higher
number would not bring evident results. After twisting the parameters,
a stable improvement of around 4% for both PPS and throughput and less
resources consumption were found to be observed by strace -c -p xxx:
1) %time was decreased by 7.8%
2) error counter was decreased from 18367 to 572
[1]: https://lore.kernel.org/all/20250619093641.70700-1-kerneljasonxing@gmail.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250704160138.48677-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a description for current oss-fuzz setup and write down the
commands needed to reproduce fuzzer reported errors:
- "Official way" in case exact oss-fuzz environment is necessary.
- "Simple way" for local tinkering.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
This simplifies local reproduction of fuzzer reported errors.
E.g. the following sequence of commands would execute much faster on a
second run:
$ SKIP_LIBELF_REBUILD=1 scripts/build-fuzzers.sh
$ out/bpf-object-fuzzer <path-to-test-case>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Initial __arena global variable support implementation in libbpf
contains a bug: it remembers struct bpf_map pointer for arena, which is
used later on to process relocations. Recording this pointer is
problematic because map pointers are not stable during ELF relocation
collection phase, as an array of struct bpf_map's can be reallocated,
invalidating all the pointers. Libbpf is dealing with similar issues by
using a stable internal map index, though for BPF arena map specifically
this approach wasn't used due to an oversight.
The resulting behavior is non-deterministic issue which depends on exact
layout of ELF object file, number of actual maps, etc. We didn't hit
this until very recently, when this bug started triggering crash in BPF
CI when validating one of sched-ext BPF programs.
The fix is rather straightforward: we just follow an established pattern
of remembering map index (just like obj->kconfig_map_idx, for example)
instead of `struct bpf_map *`, and resolving index to a pointer at the
point where map information is necessary.
While at it also add debug-level message for arena-related relocation
resolution information, which we already have for all other kinds of
maps.
Fixes: 2e7ba4f8fd1f ("libbpf: Recognize __arena global variables.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250718001009.610955-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When compiling libbpf with some compilers, this warning is triggered:
libbpf.c: In function ‘bpf_object__gen_loader’:
libbpf.c:9209:28: error: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
9209 | gen = calloc(sizeof(*gen), 1);
| ^
libbpf.c:9209:28: note: earlier argument should specify number of elements, later size of each element
Fix this by inverting the calloc() arguments.
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250717200337.49168-1-technoboy85@gmail.com
The 'commit 35f96de04127 ("bpf: Introduce BPF token object")' added
BPF token as a new kind of BPF kernel object. And BPF_OBJ_GET_INFO_BY_FD
already used to get BPF object info, so we can also get token info with
this cmd.
One usage scenario, when program runs failed with token, because of
the permission failure, we can report what BPF token is allowing with
this API for debugging.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250716134654.1162635-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for a stream API to the kernel and expose related kfuncs to
BPF programs. Two streams are exposed, BPF_STDOUT and BPF_STDERR. These
can be used for printing messages that can be consumed from user space,
thus it's similar in spirit to existing trace_pipe interface.
The kernel will use the BPF_STDERR stream to notify the program of any
errors encountered at runtime. BPF programs themselves may use both
streams for writing debug messages. BPF library-like code may use
BPF_STDERR to print warnings or errors on misuse at runtime.
The implementation of a stream is as follows. Everytime a message is
emitted from the kernel (directly, or through a BPF program), a record
is allocated by bump allocating from per-cpu region backed by a page
obtained using alloc_pages_nolock(). This ensures that we can allocate
memory from any context. The eventual plan is to discard this scheme in
favor of Alexei's kmalloc_nolock() [0].
This record is then locklessly inserted into a list (llist_add()) so
that the printing side doesn't require holding any locks, and works in
any context. Each stream has a maximum capacity of 4MB of text, and each
printed message is accounted against this limit.
Messages from a program are emitted using the bpf_stream_vprintk kfunc,
which takes a stream_id argument in addition to working otherwise
similar to bpf_trace_vprintk.
The bprintf buffer helpers are extracted out to be reused for printing
the string into them before copying it into the stream, so that we can
(with the defined max limit) format a string and know its true length
before performing allocations of the stream element.
For consuming elements from a stream, we expose a bpf(2) syscall command
named BPF_PROG_STREAM_READ_BY_FD, which allows reading data from the
stream of a given prog_fd into a user space buffer. The main logic is
implemented in bpf_stream_read(). The log messages are queued in
bpf_stream::log by the bpf_stream_vprintk kfunc, and then pulled and
ordered correctly in the stream backlog.
For this purpose, we hold a lock around bpf_stream_backlog_peek(), as
llist_del_first() (if we maintained a second lockless list for the
backlog) wouldn't be safe from multiple threads anyway. Then, if we
fail to find something in the backlog log, we splice out everything from
the lockless log, and place it in the backlog log, and then return the
head of the backlog. Once the full length of the element is consumed, we
will pop it and free it.
The lockless list bpf_stream::log is a LIFO stack. Elements obtained
using a llist_del_all() operation are in LIFO order, thus would break
the chronological ordering if printed directly. Hence, this batch of
messages is first reversed. Then, it is stashed into a separate list in
the stream, i.e. the backlog_log. The head of this list is the actual
message that should always be returned to the caller. All of this is
done in bpf_stream_backlog_fill().
From the kernel side, the writing into the stream will be a bit more
involved than the typical printk. First, the kernel typically may print
a collection of messages into the stream, and parallel writers into the
stream may suffer from interleaving of messages. To ensure each group of
messages is visible atomically, we can lift the advantage of using a
lockless list for pushing in messages.
To enable this, we add a bpf_stream_stage() macro, and require kernel
users to use bpf_stream_printk statements for the passed expression to
write into the stream. Underneath the macro, we have a message staging
API, where a bpf_stream_stage object on the stack accumulates the
messages being printed into a local llist_head, and then a commit
operation splices the whole batch into the stream's lockless log list.
This is especially pertinent for rqspinlock deadlock messages printed to
program streams. After this change, we see each deadlock invocation as a
non-interleaving contiguous message without any confusion on the
reader's part, improving their user experience in debugging the fault.
While programs cannot benefit from this staged stream writing API, they
could just as well hold an rqspinlock around their print statements to
serialize messages, hence this is kept kernel-internal for now.
Overall, this infrastructure provides NMI-safe any context printing of
messages to two dedicated streams.
Later patches will add support for printing splats in case of BPF arena
page faults, rqspinlock deadlocks, and cond_break timeouts, and
integration of this facility into bpftool for dumping messages to user
space.
[0]: https://lore.kernel.org/bpf/20250501032718.65476-1-alexei.starovoitov@gmail.com
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The `name` field in `obj->externs` points into the BTF data at initial
open time. However, some functions may invalidate this after opening and
before loading (e.g. `bpf_map__set_value_size`), which results in
pointers into freed memory and undefined behavior.
The simplest solution is to simply `strdup` these strings, similar to
the `essent_name`, and free them at the same time.
In order to test this path, the `global_map_resize` BPF selftest is
modified slightly to ensure the presence of an extern, which causes this
test to fail prior to the fix. Given there isn't an obvious API or error
to test against, I opted to add this to the existing test as an aspect
of the resizing feature rather than duplicate the test.
Fixes: 9d0a23313b1a ("libbpf: Add capability for resizing datasec maps")
Signed-off-by: Adin Scannell <amscanne@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250625050215.2777374-1-amscanne@meta.com
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250618011933.11423-1-chenyuan_fl@163.com
Adjust the sync script to handle UAPI header guards with singular and
double underscore between UAPI and LINUX. Kernel seems to have a mix of
both approaches.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
libbpf_err_ptr() helpers are meant to return NULL and set errno, if
there is an error. But btf_parse_raw_mmap() is meant to be used
internally and is expected to return ERR_PTR() values. Because of this
mismatch, when libbpf tries to mmap /sys/kernel/btf/vmlinux, we don't
detect the error correctly with IS_ERR() check, and never fallback to
old non-mmap-based way of loading vmlinux BTF.
Fix this by using proper ERR_PTR() returns internally.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 3c0421c93ce4 ("libbpf: Use mmap to parse vmlinux BTF from sysfs")
Cc: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250606202134.2738910-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sample file was renamed from trace_output_kern.c to
trace_output.bpf.c in commit d4fffba4d04b ("samples/bpf: Change _kern
suffix to .bpf with syscall tracing program"). Adjust the path in the
documentation comment for bpf_perf_event_output.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20250610140756.16332-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently libbpf supports bpf_program__attach_cgroup() with signature:
LIBBPF_API struct bpf_link *
bpf_program__attach_cgroup(const struct bpf_program *prog, int cgroup_fd);
To support mprog style attachment, additionsl fields like flags,
relative_{fd,id} and expected_revision are needed.
Add a new API:
LIBBPF_API struct bpf_link *
bpf_program__attach_cgroup_opts(const struct bpf_program *prog, int cgroup_fd,
const struct bpf_cgroup_opts *opts);
where bpf_cgroup_opts contains all above needed fields.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163146.2429212-1-yonghong.song@linux.dev
Current cgroup prog ordering is appending at attachment time. This is not
ideal. In some cases, users want specific ordering at a particular cgroup
level. To address this, the existing mprog API seems an ideal solution with
supporting BPF_F_BEFORE and BPF_F_AFTER flags.
But there are a few obstacles to directly use kernel mprog interface.
Currently cgroup bpf progs already support prog attach/detach/replace
and link-based attach/detach/replace. For example, in struct
bpf_prog_array_item, the cgroup_storage field needs to be together
with bpf prog. But the mprog API struct bpf_mprog_fp only has bpf_prog
as the member, which makes it difficult to use kernel mprog interface.
In another case, the current cgroup prog detach tries to use the
same flag as in attach. This is different from mprog kernel interface
which uses flags passed from user space.
So to avoid modifying existing behavior, I made the following changes to
support mprog API for cgroup progs:
- The support is for prog list at cgroup level. Cross-level prog list
(a.k.a. effective prog list) is not supported.
- Previously, BPF_F_PREORDER is supported only for prog attach, now
BPF_F_PREORDER is also supported by link-based attach.
- For attach, BPF_F_BEFORE/BPF_F_AFTER/BPF_F_ID/BPF_F_LINK is supported
similar to kernel mprog but with different implementation.
- For detach and replace, use the existing implementation.
- For attach, detach and replace, the revision for a particular prog
list, associated with a particular attach type, will be updated
by increasing count by 1.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163141.2428937-1-yonghong.song@linux.dev
The BTF dumper code currently displays arrays of characters as just that -
arrays, with each character formatted individually. Sometimes this is what
makes sense, but it's nice to be able to treat that array as a string.
This change adds a special case to the btf_dump functionality to allow
0-terminated arrays of single-byte integer values to be printed as
character strings. Characters for which isprint() returns false are
printed as hex-escaped values. This is enabled when the new ".emit_strings"
is set to 1 in the btf_dump_type_data_opts structure.
As an example, here's what it looks like to dump the string "hello" using
a few different field values for btf_dump_type_data_opts (.compact = 1):
- .emit_strings = 0, .skip_names = 0: (char[6])['h','e','l','l','o',]
- .emit_strings = 0, .skip_names = 1: ['h','e','l','l','o',]
- .emit_strings = 1, .skip_names = 0: (char[6])"hello"
- .emit_strings = 1, .skip_names = 1: "hello"
Here's the string "h\xff", dumped with .compact = 1 and .skip_names = 1:
- .emit_strings = 0: ['h',-1,]
- .emit_strings = 1: "h\xff"
Signed-off-by: Blake Jones <blakejones@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250603203701.520541-1-blakejones@google.com
libbpf handling of split BTF has been written largely with the
assumption that multiple splits are possible, i.e. split BTF on top of
split BTF on top of base BTF. One area where this does not quite work
is string handling in split BTF; the start string offset should be the
base BTF string section length + the base BTF string offset. This
worked in the past because for a single split BTF with base the start
string offset was always 0.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-2-alan.maguire@oracle.com
When applying a recent commit to the <uapi/linux/perf_event.h>
header I noticed that we have accumulated quite a bit of
historic noise in this header, so do a bit of spring cleaning:
- Define bitfields in a vertically aligned fashion, like
perf_event_mmap_page::capabilities already does. This
makes it easier to see the distribution and sizing of
bits within a word, at a glance. The following is much
more readable:
__u64 cap_bit0 : 1,
cap_bit0_is_deprecated : 1,
cap_user_rdpmc : 1,
cap_user_time : 1,
cap_user_time_zero : 1,
cap_user_time_short : 1,
cap_____res : 58;
Than:
__u64 cap_bit0:1,
cap_bit0_is_deprecated:1,
cap_user_rdpmc:1,
cap_user_time:1,
cap_user_time_zero:1,
cap_user_time_short:1,
cap_____res:58;
So convert all bitfield definitions from the latter style to the
former style.
- Fix typos and grammar
- Fix capitalization
- Remove whitespace noise
- Harmonize the definitions of various generations and groups of
PERF_MEM_ ABI values.
- Vertically align all definitions and assignments to the same
column (48), as the first definition (enum perf_type_id),
throughout the entire header.
- And in general make the code and comments to be more in sync
with each other and to be more readable overall.
No change in functionality.
Copy the changes over to tools/include/uapi/linux/perf_event.h.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250521221529.2547099-1-irogers@google.com
Normalize already synced UAPI headers. For all subsequent syncs this
will be done automatically by the sync script.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
It's expected that kernel UAPI headers have #ifndef guards starting with
__LINUX prefix, while in the kernel source code these guards are
actually starting with _UAPI__LINUX. The stripping of _UAPI prefix is
done (among other things) by kernel's scripts/headers_install.sh script.
Given libbpf vendors its own UAPI header under include/uapi subdir, and
those "internal" UAPI headers are sometimes used by libbpf users for
convenience, let's stick to the __LINUX prefix rule and do that during
the sync.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Avoid dereferencing bpf_map_skeleton's link field if it's NULL.
If BPF map skeleton is created with the size, that indicates containing
link field, but the field was not actually initialized with valid
bpf_link pointer, libbpf crashes. This may happen when using libbpf-rs
skeleton.
Skeleton loading may still progress, but user needs to attach struct_ops
map separately.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250514113220.219095-1-mykyta.yatsenko5@gmail.com
Return value of the validate_nla() function can be propagated all the
way up to users of libbpf API. In case of error this libbpf version
of validate_nla returns -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
Fixes: bbf48c18ee0c ("libbpf: add error reporting in XDP")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250510182011.2246631-1-a.s.protopopov@gmail.com
BTF dedup has a strong assumption that compiler with deduplicate identical
types within any given compilation unit (i.e., .c file). This property
is used when establishing equilvalence of two subgraphs of types.
Unfortunately, this property doesn't always holds in practice. We've
seen cases of having truly identical structs, unions, array definitions,
and, most recently, even pointers to the same type being duplicated
within CU.
Previously, we mitigated this on a case-by-case basis, adding a few
simple heuristics for validating that two BTF types (having two
different type IDs) are structurally the same. But this approach scales
poorly, and we can have more weird cases come up in the future.
So let's take a half-step back, and implement a bit more generic
structural equivalence check, recursively. We still limit it to
reasonable depth to avoid long reference loops. Depth-wise limiting of
potentially cyclical graph isn't great, but as I mentioned below doesn't
seem to be detrimental performance-wise. We can always improve this in
the future with per-type visited markers, if necessary.
Performance-wise this doesn't seem too affect vmlinux BTF dedup, which
makes sense because this logic kicks in not so frequently and only if we
already established a canonical candidate type match, but suddenly find
a different (but probably identical) type.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250501235231.1339822-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the latest LLVM bpf selftests build will fail with
the following error message:
progs/profiler.inc.h:710:31: error: default initialization of an object of type 'typeof ((parent_task)->real_cred->uid.val)' (aka 'const unsigned int') leaves the object uninitialized and is incompatible with C++ [-Werror,-Wdefault-const-init-unsafe]
710 | proc_exec_data->parent_uid = BPF_CORE_READ(parent_task, real_cred, uid.val);
| ^
tools/testing/selftests/bpf/tools/include/bpf/bpf_core_read.h:520:35: note: expanded from macro 'BPF_CORE_READ'
520 | ___type((src), a, ##__VA_ARGS__) __r; \
| ^
This happens because BPF_CORE_READ (and other macro) declare the
variable __r using the ___type macro which can inherit const modifier
from intermediate types.
Fix this by using __typeof_unqual__, when supported. (And when it
is not supported, the problem shouldn't appear, as older compilers
haven't complained.)
Fixes: 792001f4f7aa ("libbpf: Add user-space variants of BPF_CORE_READ() family of macros")
Fixes: a4b09a9ef945 ("libbpf: Add non-CO-RE variants of BPF_CORE_READ() macro family")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250502193031.3522715-1-a.s.protopopov@gmail.com
Return values of the linker_append_sec_data() and the
linker_append_elf_relos() functions are propagated all the
way up to users of libbpf API. In some error cases these
functions return -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
Fixes: faf6ed321cf6 ("libbpf: Add BPF static linker APIs")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250430120820.2262053-1-a.s.protopopov@gmail.com
Syncing latest libbpf commits from kernel repository.
Baseline bpf-next commit: 25601e85441dd91cf7973b002f27af4c5b8691ea
Checkpoint bpf-next commit: 8e64c387c942229c551d0f23de4d9993d3a2acb6
Baseline bpf commit: 3f8ad18f8184
Checkpoint bpf commit: b4432656b36e5cc1d50a1f2dc15357543add530e
Alan Maguire (1):
libbpf: Add identical pointer detection to btf_dedup_is_equiv()
Anton Protopopov (2):
bpf: Fix a comment describing bpf_attr
libbpf: Add likely/unlikely macros and use them in selftests
Carlos Llamas (1):
libbpf: Fix implicit memfd_create() for bionic
Feng Yang (1):
libbpf: Fix event name too long error
Ihor Solodrai (1):
libbpf: Verify section type in btf_find_elf_sections
Jonathan Wiepert (1):
Use thread-safe function pointer in libbpf_print
Mykyta Yatsenko (1):
libbpf: Add getters for BTF.ext func and line info
Paul Chaignon (2):
bpf: Clarify role of BPF_F_RECOMPUTE_CSUM
bpf: Clarify the meaning of BPF_F_PSEUDO_HDR
Tao Chen (1):
libbpf: Remove sample_period init in perf_buffer
Viktor Malik (1):
libbpf: Fix buffer overflow in bpf_object__init_prog
include/uapi/linux/bpf.h | 18 +++++----
src/bpf_helpers.h | 8 ++++
src/btf.c | 22 +++++++++++
src/libbpf.c | 81 +++++++++++++++++++++-------------------
src/libbpf.h | 6 +++
src/libbpf.map | 4 ++
src/libbpf_internal.h | 9 +++++
src/linker.c | 2 +-
8 files changed, 103 insertions(+), 47 deletions(-)
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Recently as a side-effect of
commit ac053946f5c4 ("compiler.h: introduce TYPEOF_UNQUAL() macro")
issues were observed in deduplication between modules and kernel BTF
such that a large number of kernel types were not deduplicated so
were found in module BTF (task_struct, bpf_prog etc). The root cause
appeared to be a failure to dedup struct types, specifically those
with members that were pointers with __percpu annotations.
The issue in dedup is at the point that we are deduplicating structures,
we have not yet deduplicated reference types like pointers. If multiple
copies of a pointer point at the same (deduplicated) integer as in this
case, we do not see them as identical. Special handling already exists
to deal with structures and arrays, so add pointer handling here too.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250429161042.2069678-1-alan.maguire@oracle.com
As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.
Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size
prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............
The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:
$ readelf -S crash
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040
0000000000000068 0000000000000000 AX 0 0 8
$ readelf -s crash
Symbol table '.symtab' contains 8 entries:
Num: Value Size Type Bind Vis Ndx Name
...
6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp
Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.
This is also reported by AddressSanitizer:
=================================================================
==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
READ of size 104 at 0x7c7302fe0000 thread T0
#0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
#1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
#2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
#3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
#4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
#5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
#6 0x000000400c16 in main /poc/poc.c:8
#7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
#8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
#9 0x000000400b34 in _start (/poc/poc+0x400b34)
0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
allocated by thread T0 here:
#0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
#1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
#2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
#3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740
The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947c1b3c ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").
Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.
[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Fixes: 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <2524158037@qq.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com
Introducing new libbpf API getters for BTF.ext func and line info,
namely:
bpf_program__func_info
bpf_program__func_info_cnt
bpf_program__line_info
bpf_program__line_info_cnt
This change enables scenarios, when user needs to load bpf_program
directly using `bpf_prog_load`, instead of higher-level
`bpf_object__load`. Line and func info are required for checking BTF
info in verifier; verification may fail without these fields if, for
example, program calls `bpf_obj_new`.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250408234417.452565-2-mykyta.yatsenko5@gmail.com
Since memfd_create() is not consistently available across different
bionic libc implementations, using memfd_create() directly can break
some Android builds:
tools/lib/bpf/linker.c:576:7: error: implicit declaration of function 'memfd_create' [-Werror,-Wimplicit-function-declaration]
576 | fd = memfd_create(filename, 0);
| ^
To fix this, relocate and inline the sys_memfd_create() helper so that
it can be used in "linker.c". Similar issues were previously fixed by
commit 9fa5e1a180aa ("libbpf: Call memfd_create() syscall directly").
Fixes: 6d5e5e5d7ce1 ("libbpf: Extend linker API to support in-memory ELF files")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250330211325.530677-1-cmllamas@google.com
When statically linking symbols can be replaced with those from other
statically linked libraries depending on the link order and the hoped
for "multiple definition" error may not appear. To avoid conflicts it
is good practice to namespace symbols, this change renames errstr to
libbpf_errstr. To avoid churn a #define is used to turn use of
errstr(err) to libbpf_errstr(err).
Fixes: 1633a83bf993 ("libbpf: Introduce errstr() for stringifying errno")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250320222439.1350187-1-irogers@google.com
Currently BPF_BTF_GET_FD_BY_ID requires CAP_SYS_ADMIN, which does not
allow running it from user namespace. This creates a problem when
freplace program running from user namespace needs to query target
program BTF.
This patch relaxes capable check from CAP_SYS_ADMIN to CAP_BPF and adds
support for BPF token that can be passed in attributes to syscall.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250317174039.161275-2-mykyta.yatsenko5@gmail.com
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
This patch introduces a new callback in tcp_tx_timestamp() to correlate
tcp_sendmsg timestamp with timestamps from other tx timestamping
callbacks (e.g., SND/SW/ACK).
Without this patch, BPF program wouldn't know which timestamps belong
to which flow because of no socket lock protection. This new callback
is inserted in tcp_tx_timestamp() to address this issue because
tcp_tx_timestamp() still owns the same socket lock with
tcp_sendmsg_locked() in the meanwhile tcp_tx_timestamp() initializes
the timestamping related fields for the skb, especially tskey. The
tskey is the bridge to do the correlation.
For TCP, BPF program hooks the beginning of tcp_sendmsg_locked() and
then stores the sendmsg timestamp at the bpf_sk_storage, correlating
this timestamp with its tskey that are later used in other sending
timestamping callbacks.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-11-kerneljasonxing@gmail.com
Support the ACK case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_ACK_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_ACK. The BPF program can use it to get the
same SCM_TSTAMP_ACK timestamp without modifying the user-space
application.
This patch extends txstamp_ack to two bits: 1 stands for
SO_TIMESTAMPING mode, 2 bpf extension.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-10-kerneljasonxing@gmail.com
Support hw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_HW_CB. This
callback will occur at the same timestamping point as the user
space's hardware SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP
with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers
from driver side using SKBTX_HW_TSTAMP. The new definition of
SKBTX_HW_TSTAMP means the combination tests of socket timestamping
and bpf timestamping. After this patch, drivers can work under the
bpf timestamping.
Considering some drivers don't assign the skb with hardware
timestamp, this patch does the assignment and then BPF program
can acquire the hwstamp from skb directly.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-9-kerneljasonxing@gmail.com
Support sw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_SW_CB. This
callback will occur at the same timestamping point as the user
space's software SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
Based on this patch, BPF program will get the software
timestamp when the driver is ready to send the skb. In the
sebsequent patch, the hardware timestamp will be supported.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-8-kerneljasonxing@gmail.com
Support SCM_TSTAMP_SCHED case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SCHED_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_SCHED. The BPF program can use it to get the
same SCM_TSTAMP_SCHED timestamp without modifying the user-space
application.
A new SKBTX_BPF flag is added to mark skb_shinfo(skb)->tx_flags,
ensuring that the new BPF timestamping and the current user
space's SO_TIMESTAMPING do not interfere with each other.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-7-kerneljasonxing@gmail.com
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 97c79a38cd45 ("perf core: Per event callchain limit")
introduced a per-event term to allow finer tuning of the depth of
callchains to save space.
It should be applied to the branch stack as well. For example, autoFDO
collections require maximum LBR entries. In the meantime, other
system-wide LBR users may only be interested in the latest a few number
of LBRs. A per-event LBR depth would save the perf output buffer.
The patch simply drops the uninterested branches, but HW still collects
the maximum branches. There may be a model-specific optimization that
can reduce the HW depth for some cases to reduce the overhead further.
But it isn't included in the patch set. Because it's not useful for all
cases. For example, ARCH LBR can utilize the PEBS and XSAVE to collect
LBRs. The depth should have less impact on the collecting overhead.
The model-specific optimization may be implemented later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310181536.3645382-1-kan.liang@linux.intel.com
Introduce BPF instructions with load-acquire and store-release
semantics, as discussed in [1]. Define 2 new flags:
#define BPF_LOAD_ACQ 0x100
#define BPF_STORE_REL 0x110
A "load-acquire" is a BPF_STX | BPF_ATOMIC instruction with the 'imm'
field set to BPF_LOAD_ACQ (0x100).
Similarly, a "store-release" is a BPF_STX | BPF_ATOMIC instruction with
the 'imm' field set to BPF_STORE_REL (0x110).
Unlike existing atomic read-modify-write operations that only support
BPF_W (32-bit) and BPF_DW (64-bit) size modifiers, load-acquires and
store-releases also support BPF_B (8-bit) and BPF_H (16-bit). As an
exception, however, 64-bit load-acquires/store-releases are not
supported on 32-bit architectures (to fix a build error reported by the
kernel test robot).
An 8- or 16-bit load-acquire zero-extends the value before writing it to
a 32-bit register, just like ARM64 instruction LDARH and friends.
Similar to existing atomic read-modify-write operations, misaligned
load-acquires/store-releases are not allowed (even if
BPF_F_ANY_ALIGNMENT is set).
As an example, consider the following 64-bit load-acquire BPF
instruction (assuming little-endian):
db 10 00 00 00 01 00 00 r0 = load_acquire((u64 *)(r1 + 0x0))
opcode (0xdb): BPF_ATOMIC | BPF_DW | BPF_STX
imm (0x00000100): BPF_LOAD_ACQ
Similarly, a 16-bit BPF store-release:
cb 21 00 00 10 01 00 00 store_release((u16 *)(r1 + 0x0), w2)
opcode (0xcb): BPF_ATOMIC | BPF_H | BPF_STX
imm (0x00000110): BPF_STORE_REL
In arch/{arm64,s390,x86}/net/bpf_jit_comp.c, have
bpf_jit_supports_insn(..., /*in_arena=*/true) return false for the new
instructions, until the corresponding JIT compiler supports them in
arena.
[1] https://lore.kernel.org/all/20240729183246.4110549-1-yepeilin@google.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/a217f46f0e445fbd573a1a024be5c6bf1d5fe716.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Introduce bpf_object__prepare API: additional intermediate preparation
step that performs ELF processing, relocations, prepares final state of
BPF program instructions (accessible with bpf_program__insns()), creates
and (potentially) pins maps, and stops short of loading BPF programs.
We anticipate few use cases for this API, such as:
* Use prepare to initialize bpf_token, without loading freplace
programs, unlocking possibility to lookup BTF of other programs.
* Execute prepare to obtain finalized BPF program instructions without
loading programs, enabling tools like veristat to process one program at
a time, without incurring cost of ELF parsing and processing.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250303135752.158343-4-mykyta.yatsenko5@gmail.com
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Currently for bpf progs in a cgroup hierarchy, the effective prog array
is computed from bottom cgroup to upper cgroups (post-ordering). For
example, the following cgroup hierarchy
root cgroup: p1, p2
subcgroup: p3, p4
have BPF_F_ALLOW_MULTI for both cgroup levels.
The effective cgroup array ordering looks like
p3 p4 p1 p2
and at run time, progs will execute based on that order.
But in some cases, it is desirable to have root prog executes earlier than
children progs (pre-ordering). For example,
- prog p1 intends to collect original pkt dest addresses.
- prog p3 will modify original pkt dest addresses to a proxy address for
security reason.
The end result is that prog p1 gets proxy address which is not what it
wants. Putting p1 to every child cgroup is not desirable either as it
will duplicate itself in many child cgroups. And this is exactly a use case
we are encountering in Meta.
To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag
is specified at attachment time, the prog has higher priority and the
ordering with that flag will be from top to bottom (pre-ordering).
For example, in the above example,
root cgroup: p1, p2
subcgroup: p3, p4
Let us say p2 and p4 are marked with BPF_F_PREORDER. The final
effective array ordering will be
p2 p4 p3 p1
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
In `set_kcfg_value_str`, an untrusted string is accessed with the assumption
that it will be at least two characters long due to the presence of checks for
opening and closing quotes. But the check for the closing quote
(value[len - 1] != '"') misses the fact that it could be checking the opening
quote itself in case of an invalid input that consists of just the opening
quote.
This commit adds an explicit check to make sure the string is at least two
characters long.
Signed-off-by: Nandakumar Edamana <nandakumar@nandakumar.co.in>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250221210110.3182084-1-nandakumar@nandakumar.co.in
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Fix theoretical NULL dereference in linker when resolving *extern*
STT_SECTION symbol against not-yet-existing ELF section. Not sure if
it's possible in practice for valid ELF object files (this would require
embedded assembly manipulations, at which point BTF will be missing),
but fix the s/dst_sym/dst_sec/ typo guarding this condition anyways.
Fixes: faf6ed321cf6 ("libbpf: Add BPF static linker APIs")
Fixes: a46349227cd8 ("libbpf: Add linker extern resolution support for functions and global variables")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250220002821.834400-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Libbpf has a somewhat obscure feature of automatically adjusting the
"size" of LDX/STX/ST instruction (memory store and load instructions),
based on originally recorded access size (u8, u16, u32, or u64) and the
actual size of the field on target kernel. This is meant to facilitate
using BPF CO-RE on 32-bit architectures (pointers are always 64-bit in
BPF, but host kernel's BTF will have it as 32-bit type), as well as
generally supporting safe type changes (unsigned integer type changes
can be transparently "relocated").
One issue that surfaced only now, 5 years after this logic was
implemented, is how this all works when dealing with fields that are
arrays. This isn't all that easy and straightforward to hit (see
selftests that reproduce this condition), but one of sched_ext BPF
programs did hit it with innocent looking loop.
Long story short, libbpf used to calculate entire array size, instead of
making sure to only calculate array's element size. But it's the element
that is loaded by LDX/STX/ST instructions (1, 2, 4, or 8 bytes), so
that's what libbpf should check. This patch adjusts the logic for
arrays and fixed the issue.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250207014809.1573841-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Add the following functions to libbpf API:
* btf__add_type_attr()
* btf__add_decl_attr()
These functions allow to add to BTF the type tags and decl tags with
info->kflag set to 1. The kflag indicates that the tag directly
encodes an __attribute__ and not a normal tag.
See Documentation/bpf/btf.rst changes in the subsequent patch for
details on the semantics.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250130201239.1429648-2-ihor.solodrai@linux.dev
Allow the user to configure needed_{head,tail}room for both netkit
devices. The idea is similar to 163e529200af ("veth: implement
ndo_set_rx_headroom") with the difference that the two parameters
can be specified upon device creation. By default the current behavior
stays as is which is needed_{head,tail}room is 0.
In case of Cilium, for example, the netkit devices are not enslaved
into a bridge or openvswitch device (rather, BPF-based redirection
is used out of tcx), and as such these parameters are not propagated
into the Pod's netns via peer device.
Given Cilium can run in vxlan/geneve tunneling mode (needed_headroom)
and/or be used in combination with WireGuard (needed_{head,tail}room),
allow the Cilium CNI plugin to specify these two upon netkit device
creation.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/bpf/20241220234658.490686-1-daniel@iogearbox.net
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
run-on-arch-action is simply a wrapper around docker. There is no
value in using it in libbpf, as it is not complicated to run
non-native arch docker images directly on github-hosted runners.
Docker relies on qemu-user-static installed on the system to emulate
different architectures.
Recently there were various reports about multi-arch docker builds
failing with seemingly random issues, and it appears to boil down to
qemu [1]. I stumbled on this problem while updating s390x runners [2]
for BPF CI, and setting up more recent version of qemu helped.
This change addresses recent build failures on s390x and ppc64le.
[1] https://github.com/docker/setup-qemu-action/issues/188
[2] https://github.com/kernel-patches/runner/pull/69
[3] https://docs.docker.com/build/buildkit/#getting-started
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Some versions of kernel were stripping out '.llvm.<hash>' suffix from
kerne symbols (produced by Clang LTO compilation) from function names
reported in available_filter_functions, while kallsyms reported full
original name. This confuses libbpf's multi-kprobe logic of finding all
matching kernel functions for specified user glob pattern by joining
available_filter_functions and kallsyms contents, because joining by
full symbol name won't work for symbols containing '.llvm.<hash>' suffix.
This was eventually fixed by [0] in the kernel, but we'd like to not
regress multi-kprobe experience and add a work around for this bug on
libbpf side, stripping kallsym's name if it matches user pattern and
contains '.llvm.' suffix.
[0] fb6a421fb615 ("kallsyms: Match symbols exactly with CONFIG_LTO_CLANG")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250117003957.179331-1-andrii@kernel.org
When redirecting the split BTF to the vmlinux base BTF, we need to mark
the distilled base struct/union members of split BTF structs/unions in
id_map with BTF_IS_EMBEDDED. This indicates that these types must match
both name and size later. Therefore, we need to traverse the entire
split BTF, which involves traversing type IDs from nr_dist_base_types to
nr_types. However, the current implementation uses an incorrect
traversal end type ID, so let's correct it.
Fixes: 19e00c897d50 ("libbpf: Split BTF relocation")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115100241.4171581-3-pulehui@huaweicloud.com
Jordan reported an issue in Meta production environment where func
try_to_wake_up() is renamed to try_to_wake_up.llvm.<hash>() by clang
compiler at lto mode. The original 'kprobe/try_to_wake_up' does not
work any more since try_to_wake_up() does not match the actual func
name in /proc/kallsyms.
There are a couple of ways to resolve this issue. For example, in
attach_kprobe(), we could do lookup in /proc/kallsyms so try_to_wake_up()
can be replaced by try_to_wake_up.llvm.<hach>(). Or we can force users
to use bpf_program__attach_kprobe() where they need to lookup
/proc/kallsyms to find out try_to_wake_up.llvm.<hach>(). But these two
approaches requires extra work by either libbpf or user.
Luckily, suggested by Andrii, multi kprobe already supports wildcard ('*')
for symbol matching. In the above example, 'try_to_wake_up*' can match
to try_to_wake_up() or try_to_wake_up.llvm.<hash>() and this allows
bpf prog works for different kernels as some kernels may have
try_to_wake_up() and some others may have try_to_wake_up.llvm.<hash>().
The original intention is to kprobe try_to_wake_up() only, so an optional
field unique_match is added to struct bpf_kprobe_multi_opts. If the
field is set to true, the number of matched functions must be one.
Otherwise, the attachment will fail. In the above case, multi kprobe
with 'try_to_wake_up*' and unique_match preserves user functionality.
Reported-by: Jordan Rome <linux@jordanrome.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250109174023.3368432-1-yonghong.song@linux.dev
Starting from 105ff5339f49 ("mm/memfd: add MFD_NOEXEC_SEAL and
MFD_EXEC") and until 1717449b4417 ("memfd: drop warning for missing
exec-related flags"), the kernel would print a warning if neither
MFD_NOEXEC_SEAL nor MFD_EXEC is set in memfd_create().
If libbpf runs on on a kernel between these two commits (eg. on an
improperly backported system), it'll trigger this warning.
To avoid this warning (and also be more secure), explicitly set
MFD_NOEXEC_SEAL. But since libbpf can be run on potentially very old
kernels, leave a fallback for kernels without MFD_NOEXEC_SEAL support.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/6e62c2421ad7eb1da49cbf16da95aaaa7f94d394.1735594195.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The fd_array attribute of the BPF_PROG_LOAD syscall may contain a set
of file descriptors: maps or btfs. This field was introduced as a
sparse array. Introduce a new attribute, fd_array_cnt, which, if
present, indicates that the fd_array is a continuous array of the
corresponding length.
If fd_array_cnt is non-zero, then every map in the fd_array will be
bound to the program, as if it was used by the program. This
functionality is similar to the BPF_PROG_BIND_MAP syscall, but such
maps can be used by the verifier during the program load.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241213130934.1087929-5-aspsk@isovalent.com
The new_fd and add_fd functions correspond to the original new and
add_file functions, but accept an FD instead of a file name. This
gives API consumers the option of using anonymous files/memfds to
avoid writing ELFs to disk.
This new API will be useful for performing linking as part of
bpftrace's JIT compilation.
The add_buf function is a convenience wrapper that does the work of
creating a memfd for the caller.
Signed-off-by: Alastair Robertson <ajor@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241211164030.573042-3-ajor@meta.com
Move the filename arguments and file-descriptor handling from
init_output_elf() and linker_load_obj_file() and instead handle them
at the top-level in bpf_linker__new() and bpf_linker__add_file().
This will allow the inner functions to be shared with a new,
non-filename-based, API in the next commit.
Signed-off-by: Alastair Robertson <ajor@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241211164030.573042-2-ajor@meta.com
Libelf functions do not set errno on failure. Instead, it relies on its
internal _elf_errno value, that can be retrieved via elf_errno (or the
corresponding message via elf_errmsg()). From "man libelf":
If a libelf function encounters an error it will set an internal
error code that can be retrieved with elf_errno. Each thread
maintains its own separate error code. The meaning of each error
code can be determined with elf_errmsg, which returns a string
describing the error.
As a consequence, libbpf should not return -errno when a function from
libelf fails, because an empty value will not be interpreted as an error
and won't prevent the program to stop. This is visible in
bpf_linker__add_file(), for example, where we call a succession of
functions that rely on libelf:
err = err ?: linker_load_obj_file(linker, filename, opts, &obj);
err = err ?: linker_append_sec_data(linker, &obj);
err = err ?: linker_append_elf_syms(linker, &obj);
err = err ?: linker_append_elf_relos(linker, &obj);
err = err ?: linker_append_btf(linker, &obj);
err = err ?: linker_append_btf_ext(linker, &obj);
If the object file that we try to process is not, in fact, a correct
object file, linker_load_obj_file() may fail with errno not being set,
and return 0. In this case we attempt to run linker_append_elf_sysms()
and may segfault.
This can happen (and was discovered) with bpftool:
$ bpftool gen object output.o sample_ret0.bpf.c
libbpf: failed to get ELF header for sample_ret0.bpf.c: invalid `Elf' handle
zsh: segmentation fault (core dumped) bpftool gen object output.o sample_ret0.bpf.c
Fix the issue by returning a non-null error code (-EINVAL) when libelf
functions fail.
Fixes: faf6ed321cf6 ("libbpf: Add BPF static linker APIs")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241205135942.65262-1-qmo@kernel.org
When running `bpftool` on a kernel module installed in `/lib/modules...`,
this error is encountered if the user does not specify `--base-btf` to
point to a valid base BTF (e.g. usually in `/sys/kernel/btf/vmlinux`).
However, looking at the debug output to determine the cause of the error
simply says `Invalid BTF string section`, which does not point to the
actual source of the error. This just improves that debug message to tell
users what happened.
Signed-off-by: Ben Olson <matthew.olson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/Z0YqzQ5lNz7obQG7@bolson-desk
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
USDT ELF note optionally can record an offset of .stapsdt.base, which is
used to make adjustments to USDT target attach address. Currently,
libbpf will do this address adjustment unconditionally if it finds
.stapsdt.base ELF section in target binary. But there is a corner case
where .stapsdt.base ELF section is present, but specific USDT note
doesn't reference it. In such case, libbpf will basically just add base
address and end up with absolutely incorrect USDT target address.
This adjustment has to be done only if both .stapsdt.sema section is
present and USDT note is recording a reference to it.
Fixes: 74cc6311cec9 ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121224558.796110-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hardware traces, such as instruction traces, can produce a vast amount of
trace data, so being able to reduce tracing to more specific circumstances
can be useful.
The ability to pause or resume tracing when another event happens, can do
that.
Add ability for an event to "pause" or "resume" AUX area tracing.
Add aux_pause bit to perf_event_attr to indicate that, if the event
happens, the associated AUX area tracing should be paused. Ditto
aux_resume. Do not allow aux_pause and aux_resume to be set together.
Add aux_start_paused bit to perf_event_attr to indicate to an AUX area
event that it should start in a "paused" state.
Add aux_paused to struct hw_perf_event for AUX area events to keep track of
the "paused" state. aux_paused is initialized to aux_start_paused.
Add PERF_EF_PAUSE and PERF_EF_RESUME modes for ->stop() and ->start()
callbacks. Call as needed, during __perf_event_output(). Add
aux_in_pause_resume to struct perf_buffer to prevent races with the NMI
handler. Pause/resume in NMI context will miss out if it coincides with
another pause/resume.
To use aux_pause or aux_resume, an event must be in a group with the AUX
area event as the group leader.
Example (requires Intel PT and tools patches also):
$ perf record --kcore -e intel_pt/aux-action=start-paused/k,syscalls:sys_enter_newuname/aux-action=resume/,syscalls:sys_exit_newuname/aux-action=pause/ uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.043 MB perf.data ]
$ perf script --call-trace
uname 30805 [000] 24001.058782799: name: 0x7ffc9c1865b0
uname 30805 [000] 24001.058784424: psb offs: 0
uname 30805 [000] 24001.058784424: cbr: 39 freq: 3904 MHz (139%)
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __x64_sys_newuname
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) down_read
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __cond_resched
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) in_lock_functions
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_sub
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) up_read
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) in_lock_functions
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) preempt_count_sub
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) _copy_to_user
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_to_user_mode
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_work
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) perf_syscall_exit
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_alloc
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_get_recursion_context
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_tp_event
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_update
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) tracing_gen_ctx_irq_test
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_event
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __perf_event_account_interrupt
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __this_cpu_preempt_check
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_output_forward
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_aux_pause
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) ring_buffer_get
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_lock
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_unlock
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) pt_event_stop
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) native_write_msr
uname 30805 [000] 24001.058785463: ([kernel.kallsyms]) native_write_msr
uname 30805 [000] 24001.058785639: 0x0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20241022155920.17511-3-adrian.hunter@intel.com
* Don't run pahole@tmp.master + llvm-17 combination.
* Use descriptive name of for vmtest jobs
* Don't run test_progs_cpuv4 when LLVM_VERSION < 18 (same as on BPF CI)
* Add some logging to prepare-selftests-run.sh
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Remove old patches applied to kernel source for CI. They haven't been
applied in a while.
Add a fix for token/obj_priv_implicit_token_envvar
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
We are now getting:
WARNING: Module.symvers is missing.
Modules may not have dependencies or modversions.
You may get many unresolved symbol errors.
You can set KBUILD_MODPOST_WARN=1 to turn errors into warning
if you want to proceed at your own risk.
So let's set KBUILD_MODPOST_WARN=1.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Adding support to attach program in uprobe session mode
with bpf_program__attach_uprobe_multi function.
Adding session bool to bpf_uprobe_multi_opts struct that allows
to load and attach the bpf program via uprobe session.
the attachment to create uprobe multi session.
Also adding new program loader section that allows:
SEC("uprobe.session/bpf_fentry_test*")
and loads/attaches uprobe program as uprobe session.
Adding sleepable hook (uprobe.session.s) as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-6-jolsa@kernel.org
Adding support to attach BPF program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two uprobe multi links.
Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the BPF program on return
probe simply by returning zero or non zero from the entry BPF
program execution to execute or not the BPF program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org
There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap
link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for
sockmap link
Also add comments for bpf_link_type to prevent missing updates in the
future.
Fixes: 699c23f02c65 ("bpf: Add bpf_link support for sk_msg and sk_skb progs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-2-houtao@huaweicloud.com
Since BPF skeleton inception libbpf has been doing mmap()'ing of global
data ARRAY maps in bpf_object__load_skeleton() API, which is used by
code generated .skel.h files (i.e., by BPF skeletons only).
This is wrong because if BPF object is loaded through generic
bpf_object__load() API, global data maps won't be re-mmap()'ed after
load step, and memory pointers returned from bpf_map__initial_value()
would be wrong and won't reflect the actual memory shared between BPF
program and user space.
bpf_map__initial_value() return result is rarely used after load, so
this went unnoticed for a really long time, until bpftrace project
attempted to load BPF object through generic bpf_object__load() API and
then used BPF subskeleton instantiated from such bpf_object. It turned
out that .data/.rodata/.bss data updates through such subskeleton was
"blackholed", all because libbpf wouldn't re-mmap() those maps during
bpf_object__load() phase.
Long story short, this step should be done by libbpf regardless of BPF
skeleton usage, right after BPF map is created in the kernel. This patch
moves this functionality into bpf_object__populate_internal_map() to
achieve this. And bpf_object__load_skeleton() is now simple and almost
trivial, only propagating these mmap()'ed pointers into user-supplied
skeleton structs.
We also do trivial adjustments to error reporting inside
bpf_object__populate_internal_map() for consistency with the rest of
libbpf's map-handling code.
Reported-by: Alastair Robertson <ajor@meta.com>
Reported-by: Jonathan Wiepert <jwiepert@meta.com>
Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Initialize 'new_off' and 'pad_bits' to 0 and 'pad_type' to NULL in
btf_dump_emit_bit_padding to prevent compiler warnings/errors which are
observed when compiling with 'EXTRA_CFLAGS=-g -Og' options, but do not
happen when compiling with current default options.
For example, when compiling libbpf with
$ make "EXTRA_CFLAGS=-g -Og" -C tools/lib/bpf/ clean all
Clang version 17.0.6 and GCC 13.3.1 fail to compile btf_dump.c due to
following errors:
btf_dump.c: In function ‘btf_dump_emit_bit_padding’:
btf_dump.c:903:42: error: ‘new_off’ may be used uninitialized [-Werror=maybe-uninitialized]
903 | if (new_off > cur_off && new_off <= next_off) {
| ~~~~~~~~^~~~~~~~~~~
btf_dump.c:870:13: note: ‘new_off’ was declared here
870 | int new_off, pad_bits, bits, i;
| ^~~~~~~
btf_dump.c:917:25: error: ‘pad_type’ may be used uninitialized [-Werror=maybe-uninitialized]
917 | btf_dump_printf(d, "\n%s%s: %d;", pfx(lvl), pad_type,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
918 | in_bitfield ? new_off - cur_off : 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
btf_dump.c:871:21: note: ‘pad_type’ was declared here
871 | const char *pad_type;
| ^~~~~~~~
btf_dump.c:930:20: error: ‘pad_bits’ may be used uninitialized [-Werror=maybe-uninitialized]
930 | if (bits == pad_bits) {
| ^
btf_dump.c:870:22: note: ‘pad_bits’ was declared here
870 | int new_off, pad_bits, bits, i;
| ^~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241022172329.3871958-3-ezulian@redhat.com
The hashmap__for_each_entry[_safe] is accessing 'map' as a pointer.
But it does without parentheses so passing a static hash map with an
ampersand (like '&slab_hash') will cause compiler warnings due
to unmatched types as '->' operator has a higher precedence.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011170021.1490836-1-namhyung@kernel.org
Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).
This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.
Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.
Fixes: bd054102a8c7 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The documentation says CONFIG_FUNCTION_ERROR_INJECTION is supported only
on x86. This was presumably true at the time of writing, but it's now
supported on many other architectures too. Drop this statement, since
it's not correct anymore and it fits better in other documentation
anyway.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Link: https://lore.kernel.org/r/20241010193301.995909-1-martin.kelly@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.
While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:
libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed
It's clearly not a map relocation, but is treated and reported as such
without this fix.
Fixes: 53eddb5e04ac ("libbpf: Support subprog address relocation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241009011554.880168-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since [1] kernel supports __bpf_fastcall attribute for helper function
bpf_get_smp_processor_id(). Update uapi definition for this helper in
order to have this attribute in the generated bpf_helper_defs.h
[1] commit 91b7fbf3936f ("bpf, x86, riscv, arm: no_caller_saved_registers for bpf_get_smp_processor_id()")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240916091712.2929279-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Track target endianness in 'struct bpf_gen' and process in-memory data in
native byte-order, but on finalization convert the embedded loader BPF
insns to target endianness.
The light skeleton also includes a target-accessed data blob which is
heterogeneous and thus difficult to convert to target byte-order on
finalization. Add support functions to convert data to target endianness
as it is added to the blob.
Also add additional debug logging for data blob structure details and
skeleton loading.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/569562e1d5bf1cce80a1f1a3882461ee2da1ffd5.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow static linking object files of either endianness, checking that input
files have consistent byte-order, and setting output endianness from input.
Linking requires in-memory processing of programs, relocations, sections,
etc. in native endianness, and output conversion to target byte-order. This
is enabled by built-in ELF translation and recent BTF/BTF.ext endianness
functions. Further add local functions for swapping byte-order of sections
containing BPF insns.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b47ca686d02664843fc99b96262fe3259650bc43.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Support for handling BTF data of either endianness was added in [1], but
did not include BTF.ext data for lack of use cases. Later, support for
static linking [2] provided a use case, but this feature and later ones
were restricted to native-endian usage.
Add support for BTF.ext handling in either endianness. Convert BTF.ext data
to native endianness when read into memory for further processing, and
support raw data access that restores the original byte-order for output.
Add internal header functions for byte-swapping func, line, and core info
records.
Add new API functions btf_ext__endianness() and btf_ext__set_endianness()
for query and setting byte-order, as already exist for BTF data.
[1] 3289959b97ca ("libbpf: Support BTF loading and raw data output in both endianness")
[2] 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/133407ab20e0dd5c07cab2a6fa7879dee1ffa4bc.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Referenced commit broke the logic of resetting expected_attach_type to
zero for allowed program types if kernel doesn't yet support such field.
We do need to overwrite and preserve expected_attach_type for
multi-uprobe though, but that can be done explicitly in
libbpf_prepare_prog_load().
Fixes: 5902da6d8a52 ("libbpf: Add uprobe multi link support to bpf_program__attach_usdt")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240925153012.212866-1-chen.dylane@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reduce log level of BTF loading error to INFO if BTF is not required.
Andrii says:
Nowadays the expectation is that the BPF program will have a valid
.BTF section, so even though .BTF is "optional", I think it's fine
to emit a warning for that case (any reasonably recent Clang will
produce valid BTF).
Ihor's patch is fixing the situation with an outdated host kernel
that doesn't understand BTF. libbpf will try to "upload" the
program's BTF, but if that fails and the BPF object doesn't use
any features that require having BTF uploaded, then it's just an
information message to the user, but otherwise can be ignored.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As reported by Andrii we don't currently recognize uretprobe.multi.s
programs as return probes due to using (wrong) strcmp function.
Using str_has_pfx() instead to match uretprobe.multi prefix.
Tests are passing, because the return program was executed
as entry program and all counts were incremented properly.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910125336.3056271-1-jolsa@kernel.org
We get this with GCC 15 -O3 (at least):
```
libbpf.c: In function ‘bpf_map__init_kern_struct_ops’:
libbpf.c:1109:18: error: ‘mod_btf’ may be used uninitialized [-Werror=maybe-uninitialized]
1109 | kern_btf = mod_btf ? mod_btf->btf : obj->btf_vmlinux;
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libbpf.c:1094:28: note: ‘mod_btf’ was declared here
1094 | struct module_btf *mod_btf;
| ^~~~~~~
In function ‘find_struct_ops_kern_types’,
inlined from ‘bpf_map__init_kern_struct_ops’ at libbpf.c:1102:8:
libbpf.c:982:21: error: ‘btf’ may be used uninitialized [-Werror=maybe-uninitialized]
982 | kern_type = btf__type_by_id(btf, kern_type_id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libbpf.c: In function ‘bpf_map__init_kern_struct_ops’:
libbpf.c:967:21: note: ‘btf’ was declared here
967 | struct btf *btf;
| ^~~
```
This is similar to the other libbpf fix from a few weeks ago for
the same modelling-errno issue (fab45b962749184e1a1a57c7c583782b78fad539).
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://bugs.gentoo.org/939106
Link: https://lore.kernel.org/bpf/f6962729197ae7cdf4f6d1512625bd92f2322d31.1725630494.git.sam@gentoo.org
Hi, fix some spelling errors in libbpf, the details are as follows:
-in the code comments:
termintaing->terminating
architecutre->architecture
requring->requiring
recored->recoded
sanitise->sanities
allowd->allowed
abover->above
see bpf_udst_arg()->see bpf_usdt_arg()
Signed-off-by: Lin Yikai <yikai.lin@vivo.com>
Link: https://lore.kernel.org/r/20240905110354.3274546-3-yikai.lin@vivo.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the only opportunity to set sock ops flags dictating
which callbacks fire for a socket is from within a TCP-BPF sockops
program. This is problematic if the connection is already set up
as there is no further chance to specify callbacks for that socket.
Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_setsockopt() and bpf_getsockopt()
to allow users to specify callbacks later, either via an iterator
over sockets or via a socket-specific program triggered by a
setsockopt() on the socket.
Previous discussion on this here [1].
[1] https://lore.kernel.org/bpf/f42f157b-6e52-dd4d-3d97-9b86c84c0b00@oracle.com/
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20240808150558.1035626-2-alan.maguire@oracle.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kernel/libbpf code is very well tested on s390x in BPF CI, so get rid of
it here as it often is a source of trouble and noise, without really
benefiting us much.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
We do an ugly copying of options in bpf_object__open_skeleton() just to
be able to set object name from skeleton's recorded name (while still
allowing user to override it through opts->object_name).
This is not just ugly, but it also is broken due to memcpy() that
doesn't take into account potential skel_opts' and user-provided opts'
sizes differences due to backward and forward compatibility. This leads
to copying over extra bytes and then failing to validate options
properly. It could, technically, lead also to SIGSEGV, if we are unlucky.
So just get rid of that memory copy completely and instead pass
default object name into bpf_object_open() directly, simplifying all
this significantly. The rule now is that obj_name should be non-NULL for
bpf_object_open() when called with in-memory buffer, so validate that
explicitly as well.
We adopt bpf_object__open_mem() to this as well and generate default
name (based on buffer memory address and size) outside of bpf_object_open().
Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support")
Reported-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Daniel Müller <deso@posteo.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240827203721.1145494-1-andrii@kernel.org
This adds a kfunc wrapper around strncpy_from_user,
which can be called from sleepable BPF programs.
This matches the non-sleepable 'bpf_probe_read_user_str'
helper except it includes an additional 'flags'
param, which allows consumers to clear the entire
destination buffer on success or failure.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Link: https://lore.kernel.org/r/20240823195101.3621028-1-linux@jordanrome.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In `elf_close`, we get this with GCC 15 -O3 (at least):
```
In function ‘elf_close’,
inlined from ‘elf_close’ at elf.c:53:6,
inlined from ‘elf_find_func_offset_from_file’ at elf.c:384:2:
elf.c:57:9: warning: ‘elf_fd.elf’ may be used uninitialized [-Wmaybe-uninitialized]
57 | elf_end(elf_fd->elf);
| ^~~~~~~~~~~~~~~~~~~~
elf.c: In function ‘elf_find_func_offset_from_file’:
elf.c:377:23: note: ‘elf_fd.elf’ was declared here
377 | struct elf_fd elf_fd;
| ^~~~~~
In function ‘elf_close’,
inlined from ‘elf_close’ at elf.c:53:6,
inlined from ‘elf_find_func_offset_from_file’ at elf.c:384:2:
elf.c:58:9: warning: ‘elf_fd.fd’ may be used uninitialized [-Wmaybe-uninitialized]
58 | close(elf_fd->fd);
| ^~~~~~~~~~~~~~~~~
elf.c: In function ‘elf_find_func_offset_from_file’:
elf.c:377:23: note: ‘elf_fd.fd’ was declared here
377 | struct elf_fd elf_fd;
| ^~~~~~
```
In reality, our use is fine, it's just that GCC doesn't model errno
here (see linked GCC bug). Suppress -Wmaybe-uninitialized accordingly
by initializing elf_fd.fd to -1 and elf_fd.elf to NULL.
I've done this in two other functions as well given it could easily
occur there too (same access/use pattern).
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://gcc.gnu.org/PR114952
Link: https://lore.kernel.org/bpf/14ec488a1cac02794c2fa2b83ae0cef1bce2cb36.1723578546.git.sam@gentoo.org
In struct bpf_struct_ops, we have take a pointer to a BTF type name, and
a struct btf_type. This was presumably done for convenience, but can
actually result in subtle and confusing bugs given that BTF data can be
invalidated before a program is loaded. For example, in sched_ext, we
may sometimes resize a data section after a skeleton has been opened,
but before the struct_ops scheduler map has been loaded. This may cause
the BTF data to be realloc'd, which can then cause a UAF when loading
the program because the struct_ops map has pointers directly into the
BTF data.
We're already storing the BTF type_id in struct bpf_struct_ops. Because
type_id is stable, we can therefore just update the places where we were
looking at those pointers to instead do the lookups we need from the
type_id.
Fixes: 590a00888250 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240724171459.281234-1-void@manifault.com
For all these years libbpf's BTF dumper has been emitting not strictly
valid syntax for function prototypes that have no input arguments.
Instead of `int (*blah)()` we should emit `int (*blah)(void)`.
This is not normally a problem, but it manifests when we get kfuncs in
vmlinux.h that have no input arguments. Due to compiler internal
specifics, we get no BTF information for such kfuncs, if they are not
declared with proper `(void)`.
The fix is trivial. We also need to adjust a few ancient tests that
happily assumed `()` is correct.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org
A new PEBS data source format is introduced for the p-core of Lunar
Lake. The data source field is extended to 8 bits with new encodings.
A new layout is introduced into the union intel_x86_pebs_dse.
Introduce the lnl_latency_data() to parse the new format.
Enlarge the pebs_data_source[] accordingly to include new encodings.
Only the mem load and the mem store events can generate the data source.
Introduce INTEL_HYBRID_LDLAT_CONSTRAINT and
INTEL_HYBRID_STLAT_CONSTRAINT to mark them.
Add two new bits for the new cache-related data src, L2_MHB and MSC.
The L2_MHB is short for L2 Miss Handling Buffer, which is similar to
LFB (Line Fill Buffer), but to track the L2 Cache misses.
The MSC stands for the memory-side cache.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-6-kan.liang@linux.intel.com
As this will change to a Ubuntu 24.04 runner, we want this to automatically detect
which ubuntu version it is running on.
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
I am working on upgrading to 24.04 runners. In order to make sure that current jobs are scheduled
on Ubuntu 20.04, we need to ask for runners with tag `docker-main`, which is currently
set by those old runners.
Later, we will be able to switch this tag to `docker-noble-main` which are Ubuntu 24.04 runners.
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Improve how we handle old BPF skeletons when it comes to BPF map
auto-attachment. Emit one warn-level message per each struct_ops map
that could have been auto-attached, if user provided recent enough BPF
skeleton version. Don't spam log if there are no relevant struct_ops
maps, though.
This should help users realize that they probably need to regenerate BPF
skeleton header with more recent bpftool/libbpf-cargo (or whatever other
means of BPF skeleton generation).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240708204540.4188946-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF skeleton was designed from day one to be extensible. Generated BPF
skeleton code specifies actual sizes of map/prog/variable skeletons for
that reason and libbpf is supposed to work with newer/older versions
correctly.
Unfortunately, it was missed that we implicitly embed hard-coded most
up-to-date (according to libbpf's version of libbpf.h header used to
compile BPF skeleton header) sizes of those structs, which can differ
from the actual sizes at runtime when libbpf is used as a shared
library.
We have a few places were we just index array of maps/progs/vars, which
implicitly uses these potentially invalid sizes of structs.
This patch aims to fix this problem going forward. Once this lands,
we'll backport these changes in Github repo to create patched releases
for older libbpfs.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support")
Fixes: 430025e5dca5 ("libbpf: Add subskeleton scaffolding")
Fixes: 08ac454e258e ("libbpf: Auto-attach struct_ops BPF maps in BPF skeleton")
Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240708204540.4188946-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the current state, an erroneous call to
bpf_object__find_map_by_name(NULL, ...) leads to a segmentation
fault through the following call chain:
bpf_object__find_map_by_name(obj = NULL, ...)
-> bpf_object__for_each_map(pos, obj = NULL)
-> bpf_object__next_map((obj = NULL), NULL)
-> return (obj = NULL)->maps
While calling bpf_object__find_map_by_name with obj = NULL is
obviously incorrect, this should not lead to a segmentation
fault but rather be handled gracefully.
As __bpf_map__iter already handles this situation correctly, we
can delegate the check for the regular case there and only add
a check in case the prev or next parameter is NULL.
Signed-off-by: Andreas Ziegler <ziegler.andreas@siemens.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240703083436.505124-1-ziegler.andreas@siemens.com
Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
When building with clang for ARCH=i386, the following errors are
observed:
CC kernel/bpf/btf_relocate.o
./tools/lib/bpf/btf_relocate.c:206:23: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
206 | info[id].needs_size = true;
| ^ ~
./tools/lib/bpf/btf_relocate.c:256:25: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
256 | base_info.needs_size = true;
| ^ ~
2 errors generated.
The problem is we use 1-bit, 31-bit bitfields in a signed int.
Changing to
bool needs_size: 1;
unsigned int size:31;
...resolves the error and pahole reports that 4 bytes are used
for the underlying representation:
$ pahole btf_name_info tools/lib/bpf/btf_relocate.o
struct btf_name_info {
const char * name; /* 0 8 */
unsigned int needs_size:1; /* 8: 0 4 */
unsigned int size:31; /* 8: 1 4 */
__u32 id; /* 12 4 */
/* size: 16, cachelines: 1, members: 4 */
/* last cacheline: 16 bytes */
};
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240624192903.854261-1-alan.maguire@oracle.com
When upgrading to libbpf 1.3 we noticed a big performance hit while
loading programs using CORE on non base-BTF symbols. This was tracked
down to the new BTF sanity check logic. The issue is the base BTF
definitions are checked first for the base BTF and then again for every
module BTF.
Loading 5 dummy programs (using libbpf-rs) that are using CORE on a
non-base BTF symbol on my system:
- Before this fix: 3s.
- With this fix: 0.1s.
Fix this by only checking the types starting at the BTF start id. This
should ensure the base BTF is still checked as expected but only once
(btf->start_id == 1 when creating the base BTF), and then only
additional types are checked for each module BTF.
Fixes: 3903802bb99a ("libbpf: Add basic BTF sanity validation")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20240624090908.171231-1-atenart@kernel.org
Share relocation implementation with the kernel. As part of this,
we also need the type/string iteration functions so also share
btf_iter.c file. Relocation code in kernel and userspace is identical
save for the impementation of the reparenting of split BTF to the
relocated base BTF and retrieval of the BTF header from "struct btf";
these small functions need separate user-space and kernel implementations
for the separate "struct btf"s they operate upon.
One other wrinkle on the kernel side is we have to map .BTF.ids in
modules as they were generated with the type ids used at BTF encoding
time. btf_relocate() optionally returns an array mapping from old BTF
ids to relocated ids, so we use that to fix up these references where
needed for kfuncs.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-5-alan.maguire@oracle.com
I encountered an issue when building the test_progs from the repository [1]:
$ pwd
/work/Qemu/x86_64/linux-6.10-rc2/tools/testing/selftests/bpf/
$ make test_progs V=1
[...]
./tools/sbin/bpftool gen object ./ip_check_defrag.bpf.linked2.o ./ip_check_defrag.bpf.linked1.o
libbpf: failed to find symbol for variable 'bpf_dynptr_slice' in section '.ksyms'
Error: failed to link './ip_check_defrag.bpf.linked1.o': No such file or directory (2)
[...]
Upon investigation, I discovered that the btf_types referenced in the '.ksyms'
section had a kind of BTF_KIND_FUNC instead of BTF_KIND_VAR:
$ bpftool btf dump file ./ip_check_defrag.bpf.linked1.o
[...]
[2] DATASEC '.ksyms' size=0 vlen=2
type_id=16 offset=0 size=0 (FUNC 'bpf_dynptr_from_skb')
type_id=17 offset=0 size=0 (FUNC 'bpf_dynptr_slice')
[...]
[16] FUNC 'bpf_dynptr_from_skb' type_id=82 linkage=extern
[17] FUNC 'bpf_dynptr_slice' type_id=85 linkage=extern
[...]
For a detailed analysis, please refer to [2]. We can add a kind checking to
fix the issue.
[1] https://github.com/eddyz87/bpf/tree/binsort-btf-dedup
[2] https://lore.kernel.org/all/0c0ef20c-c05e-4db9-bad7-2cbc0d6dfae7@oracle.com/
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240619122355.426405-1-dolinux.peng@gmail.com
Update btf_parse_elf() to check if .BTF.base section is present.
The logic is as follows:
if .BTF.base section exists:
distilled_base := btf_new(.BTF.base)
if distilled_base:
btf := btf_new(.BTF, .base_btf=distilled_base)
if base_btf:
btf_relocate(btf, base_btf)
else:
btf := btf_new(.BTF)
return btf
In other words:
- if .BTF.base section exists, load BTF from it and use it as a base
for .BTF load;
- if base_btf is specified and .BTF.base section exist, relocate newly
loaded .BTF against base_btf.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240613095014.357981-6-alan.maguire@oracle.com
Map distilled base BTF type ids referenced in split BTF and their
references to the base BTF passed in, and if the mapping succeeds,
reparent the split BTF to the base BTF.
Relocation is done by first verifying that distilled base BTF
only consists of named INT, FLOAT, ENUM, FWD, STRUCT and
UNION kinds; then we sort these to speed lookups. Once sorted,
the base BTF is iterated, and for each relevant kind we check
for an equivalent in distilled base BTF. When found, the
mapping from distilled -> base BTF id and string offset is recorded.
In establishing mappings, we need to ensure we check STRUCT/UNION
size when the STRUCT/UNION is embedded in a split BTF STRUCT/UNION,
and when duplicate names exist for the same STRUCT/UNION. Otherwise
size is ignored in matching STRUCT/UNIONs.
Once all mappings are established, we can update type ids
and string offsets in split BTF and reparent it to the new base.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-4-alan.maguire@oracle.com
To support more robust split BTF, adding supplemental context for the
base BTF type ids that split BTF refers to is required. Without such
references, a simple shuffling of base BTF type ids (without any other
significant change) invalidates the split BTF. Here the attempt is made
to store additional context to make split BTF more robust.
This context comes in the form of distilled base BTF providing minimal
information (name and - in some cases - size) for base INTs, FLOATs,
STRUCTs, UNIONs, ENUMs and ENUM64s along with modified split BTF that
points at that base and contains any additional types needed (such as
TYPEDEF, PTR and anonymous STRUCT/UNION declarations). This
information constitutes the minimal BTF representation needed to
disambiguate or remove split BTF references to base BTF. The rules
are as follows:
- INT, FLOAT, FWD are recorded in full.
- if a named base BTF STRUCT or UNION is referred to from split BTF, it
will be encoded as a zero-member sized STRUCT/UNION (preserving
size for later relocation checks). Only base BTF STRUCT/UNIONs
that are either embedded in split BTF STRUCT/UNIONs or that have
multiple STRUCT/UNION instances of the same name will _need_ size
checks at relocation time, but as it is possible a different set of
types will be duplicates in the later to-be-resolved base BTF,
we preserve size information for all named STRUCT/UNIONs.
- if an ENUM[64] is named, a ENUM forward representation (an ENUM
with no values) of the same size is used.
- in all other cases, the type is added to the new split BTF.
Avoiding struct/union/enum/enum64 expansion is important to keep the
distilled base BTF representation to a minimum size.
When successful, new representations of the distilled base BTF and new
split BTF that refers to it are returned. Both need to be freed by the
caller.
So to take a simple example, with split BTF with a type referring
to "struct sk_buff", we will generate distilled base BTF with a
0-member STRUCT sk_buff of the appropriate size, and the split BTF
will refer to it instead.
Tools like pahole can utilize such split BTF to populate the .BTF
section (split BTF) and an additional .BTF.base section. Then
when the split BTF is loaded, the distilled base BTF can be used
to relocate split BTF to reference the current (and possibly changed)
base BTF.
So for example if "struct sk_buff" was id 502 when the split BTF was
originally generated, we can use the distilled base BTF to see that
id 502 refers to a "struct sk_buff" and replace instances of id 502
with the current (relocated) base BTF sk_buff type id.
Distilled base BTF is small; when building a kernel with all modules
using distilled base BTF as a test, overall module size grew by only
5.3Mb total across ~2700 modules.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-2-alan.maguire@oracle.com
Similarly to `bpf_program`, support `bpf_map` automatic attachment in
`bpf_object__attach_skeleton`. Currently only struct_ops maps could be
attached.
On bpftool side, code-generate links in skeleton struct for struct_ops maps.
Similarly to `bpf_program_skeleton`, set links in `bpf_map_skeleton`.
On libbpf side, extend `bpf_map` with new `autoattach` field to support
enabling or disabling autoattach functionality, introducing
getter/setter for this field.
`bpf_object__(attach|detach)_skeleton` is extended with
attaching/detaching struct_ops maps logic.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240605175135.117127-1-yatsenko@meta.com
Implement iterator-based type ID and string offset BTF field iterator.
This is used extensively in BTF-handling code and BPF linker code for
various sanity checks, rewriting IDs/offsets, etc. Currently this is
implemented as visitor pattern calling custom callbacks, which makes the
logic (especially in simple cases) unnecessarily obscure and harder to
follow.
Having equivalent functionality using iterator pattern makes for simpler
to understand and maintain code. As we add more code for BTF processing
logic in libbpf, it's best to switch to iterator pattern before adding
more callback-based code.
The idea for iterator-based implementation is to record offsets of
necessary fields within fixed btf_type parts (which should be iterated
just once), and, for kinds that have multiple members (based on vlen
field), record where in each member necessary fields are located.
Generic iteration code then just keeps track of last offset that was
returned and handles N members correctly. Return type is just u32
pointer, where NULL is returned when all relevant fields were already
iterated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240605001629.4061937-2-andrii@kernel.org
pahole staging workflow is using the same old VM image as BPF selftests
stages. It doesn't have recent enough glibc, so we can't yet switch to
newer Ubuntu, unfortunately.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Recent commit 0cfe71f45f42 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f45f42 ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make sure to preserve and/or enforce FD_CLOEXEC flag on duped FDs.
Use dup3() with O_CLOEXEC flag for that.
Without this fix libbpf effectively clears FD_CLOEXEC flag on each of BPF
map/prog FD, which is definitely not the right or expected behavior.
Reported-by: Lennart Poettering <lennart@poettering.net>
Fixes: bc308d011ab8 ("libbpf: call dup2() syscall directly")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240529223239.504241-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Track ubuntu-latest where relevant and possible.
We can't update to ubuntu-latest when building and running BPF
selftests, though, because our QEMU image has too old of an GLIBC.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Update .mailmap based on libbpf's list of contributors and on the latest
.mailmap version in the upstream repository.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Libbpf is automatically (and transparently to user) detecting
multi-uprobe support in the kernel, and, if supported, uses
multi-uprobes to improve USDT attachment speed.
USDTs can be attached system-wide or for the specific process by PID. In
the latter case, we rely on correct kernel logic of not triggering USDT
for unrelated processes.
As such, on older kernels that do support multi-uprobes, but still have
broken PID filtering logic, we need to fall back to singular uprobes.
Unfortunately, whether user is using PID filtering or not is known at
the attachment time, which happens after relevant BPF programs were
loaded into the kernel. Also unfortunately, we need to make a call
whether to use multi-uprobes or singular uprobe for SEC("usdt") programs
during BPF object load time, at which point we have no information about
possible PID filtering.
The distinction between single and multi-uprobes is small, but important
for the kernel. Multi-uprobes get BPF_TRACE_UPROBE_MULTI attach type,
and kernel internally substitiute different implementation of some of
BPF helpers (e.g., bpf_get_attach_cookie()) depending on whether uprobe
is multi or singular. So, multi-uprobes and singular uprobes cannot be
intermixed.
All the above implies that we have to make an early and conservative
call about the use of multi-uprobes. And so this patch modifies libbpf's
existing feature detector for multi-uprobe support to also check correct
PID filtering. If PID filtering is not yet fixed, we fall back to
singular uprobes for USDTs.
This extension to feature detection is simple thanks to kernel's -EINVAL
addition for pid < 0.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
tstamp_type is now set based on actual clockid_t compressed
into 2 bits.
To make the design scalable for future needs this commit bring in
the change to extend the tstamp_type:1 to tstamp_type:2 to support
other clockid_t timestamp.
We now support CLOCK_TAI as part of tstamp_type as part of this
commit with existing support CLOCK_MONOTONIC and CLOCK_REALTIME.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509211834.3235191-3-quic_abchauha@quicinc.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
These were used to build perf to provide defines not available in older
distros, but this was back in 2017, nowadays all the distros that are
supported and I have build containers for work using just the system
headers, so ditch them.
Some of these older distros may not have things that are used in 'perf
trace', but then they also don't have libtraceevent packages, so don't
build 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240315204835.748716-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adjust `union bpf_attr` size passed to kernel in two feature-detecting
functions to take into account prog_token_fd field.
Libbpf is avoiding memset()'ing entire `union bpf_attr` by only using
minimal set of bpf_attr's fields. Two places have been missed when
wiring BPF token support in libbpf's feature detection logic.
Fix them trivially.
Fixes: f3dcee938f48 ("libbpf: Wire up token_fd into feature probing logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240513180804.403775-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[Changes from V1:
- Use a default branch in the switch statement to initialize `val'.]
GCC warns that `val' may be used uninitialized in the
BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as:
[...]
unsigned long long val; \
[...] \
switch (__CORE_RELO(s, field, BYTE_SIZE)) { \
case 1: val = *(const unsigned char *)p; break; \
case 2: val = *(const unsigned short *)p; break; \
case 4: val = *(const unsigned int *)p; break; \
case 8: val = *(const unsigned long long *)p; break; \
} \
[...]
val; \
} \
This patch adds a default entry in the switch statement that sets
`val' to zero in order to avoid the warning, and random values to be
used in case __builtin_preserve_field_info returns unexpected values
for BPF_FIELD_BYTE_SIZE.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240508101313.16662-1-jose.marchesi@oracle.com
Extend libbpf's pre-load checks for BPF programs, detecting more typical
conditions that are destinated to cause BPF program failure. This is an
opportunity to provide more helpful and actionable error message to
users, instead of potentially very confusing BPF verifier log and/or
error.
In this case, we detect struct_ops BPF program that was not referenced
anywhere, but still attempted to be loaded (according to libbpf logic).
Suggest that the program might need to be used in some struct_ops
variable. User will get a message of the following kind:
libbpf: prog 'test_1_forgotten': SEC("struct_ops") program isn't referenced anywhere, did you forget to use it?
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-6-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
strerror_r(), used from libbpf-specific libbpf_strerror_r() wrapper is
documented to return error in two different ways, depending on glibc
version. Take that into account when handling strerror_r()'s own errors,
which happens when we pass some non-standard (internal) kernel error to
it. Before this patch we'd have "ERROR: strerror_r(524)=22", which is
quite confusing. Now for the same situation we'll see a bit less
visually scary "unknown error (-524)".
At least we won't confuse user with irrelevant EINVAL (22).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-5-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
There is yet another corner case where user can set STRUCT_OPS program
reference in STRUCT_OPS map to NULL, but libbpf will fail to disable
autoload for such BPF program. This time it's the case of "new" kernel
which has type information about callback field, but user explicitly
nulled-out program reference from user-space after opening BPF object.
Fix, hopefully, the last remaining unhandled case.
Fixes: 0737df6de946 ("libbpf: better fix for handling nulled-out struct_ops program")
Fixes: f973fccd43d3 ("libbpf: handle nulled-out program in struct_ops correctly")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-3-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
libbpf ensures that BPF program references set in map->st_ops->progs[i]
during open phase are always valid STRUCT_OPS programs. This is done in
bpf_object__collect_st_ops_relos(). So there is no need to double-check
that in bpf_map__init_kern_struct_ops().
Simplify the code by removing unnecessary check. Also, we avoid using
local prog variable to keep code similar to the upcoming fix, which adds
similar logic in another part of bpf_map__init_kern_struct_ops().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
[Differences from V1:
- Do not introduce a global typedef, as this is a public header.
- Keep the void* casts in BPF_KPROBE_READ_RET_IP and
BPF_KRETPROBE_READ_RET_IP, as these are necessary
for converting to a const void* argument of
bpf_probe_read_kernel.]
The BPF_PROG, BPF_KPROBE and BPF_KSYSCALL macros defined in
tools/lib/bpf/bpf_tracing.h use a clever hack in order to provide a
convenient way to define entry points for BPF programs as if they were
normal C functions that get typed actual arguments, instead of as
elements in a single "context" array argument.
For example, PPF_PROGS allows writing:
SEC("struct_ops/cwnd_event")
void BPF_PROG(cwnd_event, struct sock *sk, enum tcp_ca_event event)
{
bbr_cwnd_event(sk, event);
dctcp_cwnd_event(sk, event);
cubictcp_cwnd_event(sk, event);
}
That expands into a pair of functions:
void ____cwnd_event (unsigned long long *ctx, struct sock *sk, enum tcp_ca_event event)
{
bbr_cwnd_event(sk, event);
dctcp_cwnd_event(sk, event);
cubictcp_cwnd_event(sk, event);
}
void cwnd_event (unsigned long long *ctx)
{
_Pragma("GCC diagnostic push")
_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")
return ____cwnd_event(ctx, (void*)ctx[0], (void*)ctx[1]);
_Pragma("GCC diagnostic pop")
}
Note how the 64-bit unsigned integers in the incoming CTX get casted
to a void pointer, and then implicitly converted to whatever type of
the actual argument in the wrapped function. In this case:
Arg1: unsigned long long -> void * -> struct sock *
Arg2: unsigned long long -> void * -> enum tcp_ca_event
The behavior of GCC and clang when facing such conversions differ:
pointer -> pointer
Allowed by the C standard.
GCC: no warning nor error.
clang: no warning nor error.
pointer -> integer type
[C standard says the result of this conversion is implementation
defined, and it may lead to unaligned pointer etc.]
GCC: error: integer from pointer without a cast [-Wint-conversion]
clang: error: incompatible pointer to integer conversion [-Wint-conversion]
pointer -> enumerated type
GCC: error: incompatible types in assigment (*)
clang: error: incompatible pointer to integer conversion [-Wint-conversion]
These macros work because converting pointers to pointers is allowed,
and converting pointers to integers also works provided a suitable
integer type even if it is implementation defined, much like casting a
pointer to uintptr_t is guaranteed to work by the C standard. The
conversion errors emitted by both compilers by default are silenced by
the pragmas.
However, the GCC error marked with (*) above when assigning a pointer
to an enumerated value is not associated with the -Wint-conversion
warning, and it is not possible to turn it off.
This is preventing building the BPF kernel selftests with GCC.
This patch fixes this by avoiding intermediate casts to void*,
replaced with casts to `unsigned long long', which is an integer type
capable of safely store a BPF pointer, much like the standard
uintptr_t.
Testing performed in bpf-next master:
- vmtest.sh -- ./test_verifier
- vmtest.sh -- ./test_progs
- make M=samples/bpf
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502170925.3194-1-jose.marchesi@oracle.com
The macro bpf_ksym_exists is defined in bpf_helpers.h as:
#define bpf_ksym_exists(sym) ({ \
_Static_assert(!__builtin_constant_p(!!sym), #sym " should be marked as __weak"); \
!!sym; \
})
The purpose of the macro is to determine whether a given symbol has
been defined, given the address of the object associated with the
symbol. It also has a compile-time check to make sure the object
whose address is passed to the macro has been declared as weak, which
makes the check on `sym' meaningful.
As it happens, the check for weak doesn't work in GCC in all cases,
because __builtin_constant_p not always folds at parse time when
optimizing. This is because optimizations that happen later in the
compilation process, like inlining, may make a previously non-constant
expression a constant. This results in errors like the following when
building the selftests with GCC:
bpf_helpers.h:190:24: error: expression in static assertion is not constant
190 | _Static_assert(!__builtin_constant_p(!!sym), #sym " should be marked as __weak"); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fortunately recent versions of GCC support a __builtin_has_attribute
that can be used to directly check for the __weak__ attribute. This
patch changes bpf_helpers.h to use that builtin when building with a
recent enough GCC, and to omit the check if GCC is too old to support
the builtin.
The macro used for GCC becomes:
#define bpf_ksym_exists(sym) ({ \
_Static_assert(__builtin_has_attribute (*sym, __weak__), #sym " should be marked as __weak"); \
!!sym; \
})
Note that since bpf_ksym_exists is designed to get the address of the
object associated with symbol SYM, we pass *sym to
__builtin_has_attribute instead of sym. When an expression is passed
to __builtin_has_attribute then it is the type of the passed
expression that is checked for the specified attribute. The
expression itself is not evaluated. This accommodates well with the
existing usages of the macro:
- For function objects:
struct task_struct *bpf_task_acquire(struct task_struct *p) __ksym __weak;
[...]
bpf_ksym_exists(bpf_task_acquire)
- For variable objects:
extern const struct rq runqueues __ksym __weak; /* typed */
[...]
bpf_ksym_exists(&runqueues)
Note also that BPF support was added in GCC 10 and support for
__builtin_has_attribute in GCC 9.
Locally tested in bpf-next master branch.
No regressions.
Signed-of-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240428112559.10518-1-jose.marchesi@oracle.com
ringbuf_process_ring() return int64_t, while ring__consume_n() assigns
it to int. It's highly unlikely, but possible for ringbuf_process_ring()
to return value larger than INT_MAX, so use int64_t. ring__consume_n()
does check INT_MAX before returning int result to the user.
Fixes: 4d22ea94ea33 ("libbpf: Add ring__consume_n / ring_buffer__consume_n")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240430201952.888293-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In commit 4794f18bf4 ("sync: Sync .mailmap entries"), we updated the
sync-up script to automatically update libbpf's .mailmap; however, the
script would not take care of committing the changes. Let's address
this.
The code is copied and adapted from the part where we commit changes to
src/bpf_helper_defs.h.
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Previous attempt to fix the handling of nulled-out (from skeleton)
struct_ops program is working well only if struct_ops program is defined
as non-autoloaded by default (i.e., has SEC("?struct_ops") annotation,
with question mark).
Unfortunately, that fix is incomplete due to how
bpf_object_adjust_struct_ops_autoload() is marking referenced or
non-referenced struct_ops program as autoloaded (or not). Because
bpf_object_adjust_struct_ops_autoload() is run after
bpf_map__init_kern_struct_ops() step, which sets program slot to NULL,
such programs won't be considered "referenced", and so its autoload
property won't be changed.
This all sounds convoluted and it is, but the desire is to have as
natural behavior (as far as struct_ops usage is concerned) as possible.
This fix is redoing the original fix but makes it work for
autoloaded-by-default struct_ops programs as well. We achieve this by
forcing prog->autoload to false if prog was declaratively set for some
struct_ops map, but then nulled-out from skeleton (programmatically).
This achieves desired effect of not autoloading it. If such program is
still referenced somewhere else (different struct_ops map or different
callback field), it will get its autoload property adjusted by
bpf_object_adjust_struct_ops_autoload() later.
We also fix selftest, which accidentally used SEC("?struct_ops")
annotation. It was meant to use autoload-by-default program from the
very beginning.
Fixes: f973fccd43d3 ("libbpf: handle nulled-out program in struct_ops correctly")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240501041706.3712608-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In some situations, it is useful to explicitly specify a kernel module
to search for a tracing program target (e.g. when a function of the same
name exists in multiple modules or in vmlinux).
This patch enables that by allowing the "module:function" syntax for the
find_kernel_btf_id function. Thanks to this, the syntax can be used both
from a SEC macro (i.e. `SEC(fentry/module:function)`) and via the
bpf_program__set_attach_target API call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9085a8cb9a552de98e554deb22ff7e977d025440.1714469650.git.vmalik@redhat.com
Adding support to attach program in kprobe session mode
with bpf_program__attach_kprobe_multi_opts function.
Adding session bool to bpf_kprobe_multi_opts struct that allows
to load and attach the bpf program via kprobe session.
the attachment to create kprobe multi session.
Also adding new program loader section that allows:
SEC("kprobe.session/bpf_fentry_test*")
and loads/attaches kprobe program as kprobe session.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-5-jolsa@kernel.org
Adding support to attach bpf program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two kprobe multi links.
Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the bpf program on return
probe simply by returning zero or non zero from the entry bpf
program execution to execute or not the bpf program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-2-jolsa@kernel.org
If struct_ops has one of program callbacks set declaratively and host
kernel is old and doesn't support this callback, libbpf will allow to
load such struct_ops as long as that callback was explicitly nulled-out
(presumably through skeleton). This is all working correctly, except we
won't reset corresponding program slot to NULL before bailing out, which
will lead to libbpf not detecting that BPF program has to be not
auto-loaded. Fix this by unconditionally resetting corresponding program
slot to NULL.
Fixes: c911fc61a7ce ("libbpf: Skip zeroed or null fields if not found in the kernel type.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240428030954.3918764-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The definition of bpf_tail_call_static in tools/lib/bpf/bpf_helpers.h
is guarded by a preprocessor check to assure that clang is recent
enough to support it. This patch updates the guard so the function is
compiled when using GCC 13 or later as well.
Tested in bpf-next master. No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240426145158.14409-1-jose.marchesi@oracle.com
Two important arguments in RTT estimation, mrtt and srtt, are passed to
tcp_bpf_rtt(), so that bpf programs get more information about RTT
computation in BPF_SOCK_OPS_RTT_CB.
The difference between bpf_sock_ops->srtt_us and the srtt here is: the
former is an old rtt before update, while srtt passed by tcp_bpf_rtt()
is that after update.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240425161724.73707-2-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The kernel repository has a .mailmap file to remap author names and
email addresses to their desired format in Git logs (for details, see
gitmailmap documentation [0]). Alas, this is only visible for author
information when looking at the logs locally, as GitHub does not support
mailmaps at the moment [1].
This commit adds a .mailmap file for libbpf, automatically generated
from the kernel's version. The script to generate the .mailmap is added,
too: it works by grepping email addresses from authors in the
repository, and collecting all lines ending with this address in the
kernel's .mailmap - in other words, all lines where this address is used
as a pattern for a remapping.
To keep the .mailmap up-to-date, add a call to the script to
sync-kernel.sh.
[0] https://git-scm.com/docs/gitmailmap
[1] https://github.com/orgs/community/discussions/22518
Signed-off-by: Quentin Monnet <qmo@kernel.org>
When dumping a character array, libbpf will watch for a '\0' and set
is_array_terminated=true if found. This prevents libbpf from printing
the remaining characters of the array, treating it as a nul-terminated
string.
However, once this flag is set, it's never reset, leading to subsequent
characters array not being printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
],
This patch saves the is_array_terminated flag and restores its
default (false) value before looping over the elements of an array,
then restores it afterward. This way, libbpf's behavior is unchanged
when dumping the characters of an array, but subsequent arrays are
printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
[
'l',
'o',
],
],
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240413211258.134421-3-qde@naccy.de
In btf_dump_array_data(), libbpf will call btf_dump_dump_type_data() for
each element. For an array of characters, each element will be
processed the following way:
- btf_dump_dump_type_data() is called to print the character
- btf_dump_data_pfx() prefixes the current line with the proper number
of indentations
- btf_dump_int_data() is called to print the character
- After the last character is printed, btf_dump_dump_type_data() calls
btf_dump_data_pfx() before writing the closing bracket
However, for an array containing characters, btf_dump_int_data() won't
print any '\0' and subsequent characters. This leads to situations where
the line prefix is written, no character is added, then the prefix is
written again before adding the closing bracket:
(struct sk_metadata){
.str_array = (__u8[14])[
'H',
'e',
'l',
'l',
'o',
],
This change solves this issue by printing the '\0' character, which
has two benefits:
- The bracket closing the array is properly aligned
- It's clear from a user point of view that libbpf uses '\0' as a
terminator for arrays of characters.
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240413211258.134421-2-qde@naccy.de
Add bpf_link support for sk_msg and sk_skb programs. We have an
internal request to support bpf_link for sk_msg programs so user
space can have a uniform handling with bpf_link based libbpf
APIs. Using bpf_link based libbpf API also has a benefit which
makes system robust by decoupling prog life cycle and
attachment life cycle.
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240410043527.3737160-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In some cases, instead of always consuming all items from ring buffers
in a greedy way, we may want to consume up to a certain amount of items,
for example when we need to copy items from the BPF ring buffer to a
limited user buffer.
This change allows to set an upper limit to the amount of items consumed
from one or more ring buffers.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240406092005.92399-3-andrea.righi@canonical.com
The struct bpf_fib_lookup is supposed to be of size 64. A recent commit
59b418c7063d ("bpf: Add a check for struct bpf_fib_lookup size") added
a static assertion to check this property so that future changes to the
structure will not accidentally break this assumption.
As it immediately turned out, on some 32-bit arm systems, when AEABI=n,
the total size of the structure was equal to 68, see [1]. This happened
because the bpf_fib_lookup structure contains a union of two 16-bit
fields:
union {
__u16 tot_len;
__u16 mtu_result;
};
which was supposed to compile to a 16-bit-aligned 16-bit field. On the
aforementioned setups it was instead both aligned and padded to 32-bits.
Declare this inner union as __attribute__((packed, aligned(2))) such
that it always is of size 2 and is aligned to 16 bits.
[1] https://lore.kernel.org/all/CA+G9fYtsoP51f-oP_Sp5MOq-Ffv8La2RztNpwvE6+R1VtFiLrw@mail.gmail.com/#t
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: e1850ea9bd9e ("bpf: bpf_fib_lookup return MTU value as output when looked up")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240403123303.1452184-1-aspsk@isovalent.com
With CONFIG_LTO_CLANG_THIN enabled, with some of previous
version of kernel code base ([1]), I hit the following
error:
test_ksyms:PASS:kallsyms_fopen 0 nsec
test_ksyms:FAIL:ksym_find symbol 'bpf_link_fops' not found
#118 ksyms:FAIL
The reason is that 'bpf_link_fops' is renamed to
bpf_link_fops.llvm.8325593422554671469
Due to cross-file inlining, the static variable 'bpf_link_fops'
in syscall.c is used by a function in another file. To avoid
potential duplicated names, the llvm added suffix
'.llvm.<hash>' ([2]) to 'bpf_link_fops' variable.
Such renaming caused a problem in libbpf if 'bpf_link_fops'
is used in bpf prog as a ksym but 'bpf_link_fops' does not
match any symbol in /proc/kallsyms.
To fix this issue, libbpf needs to understand that suffix '.llvm.<hash>'
is caused by clang lto kernel and to process such symbols properly.
With latest bpf-next code base built with CONFIG_LTO_CLANG_THIN,
I cannot reproduce the above failure any more. But such an issue
could happen with other symbols or in the future for bpf_link_fops symbol.
For example, with my current kernel, I got the following from
/proc/kallsyms:
ffffffff84782154 d __func__.net_ratelimit.llvm.6135436931166841955
ffffffff85f0a500 d tk_core.llvm.726630847145216431
ffffffff85fdb960 d __fs_reclaim_map.llvm.10487989720912350772
ffffffff864c7300 d fake_dst_ops.llvm.54750082607048300
I could not easily create a selftest to test newly-added
libbpf functionality with a static C test since I do not know
which symbol is cross-file inlined. But based on my particular kernel,
the following test change can run successfully.
> diff --git a/tools/testing/selftests/bpf/prog_tests/ksyms.c b/tools/testing/selftests/bpf/prog_tests/ksyms.c
> index 6a86d1f07800..904a103f7b1d 100644
> --- a/tools/testing/selftests/bpf/prog_tests/ksyms.c
> +++ b/tools/testing/selftests/bpf/prog_tests/ksyms.c
> @@ -42,6 +42,7 @@ void test_ksyms(void)
> ASSERT_EQ(data->out__bpf_link_fops, link_fops_addr, "bpf_link_fops");
> ASSERT_EQ(data->out__bpf_link_fops1, 0, "bpf_link_fops1");
> ASSERT_EQ(data->out__btf_size, btf_size, "btf_size");
> + ASSERT_NEQ(data->out__fake_dst_ops, 0, "fake_dst_ops");
> ASSERT_EQ(data->out__per_cpu_start, per_cpu_start_addr, "__per_cpu_start");
>
> cleanup:
> diff --git a/tools/testing/selftests/bpf/progs/test_ksyms.c b/tools/testing/selftests/bpf/progs/test_ksyms.c
> index 6c9cbb5a3bdf..fe91eef54b66 100644
> --- a/tools/testing/selftests/bpf/progs/test_ksyms.c
> +++ b/tools/testing/selftests/bpf/progs/test_ksyms.c
> @@ -9,11 +9,13 @@ __u64 out__bpf_link_fops = -1;
> __u64 out__bpf_link_fops1 = -1;
> __u64 out__btf_size = -1;
> __u64 out__per_cpu_start = -1;
> +__u64 out__fake_dst_ops = -1;
>
> extern const void bpf_link_fops __ksym;
> extern const void __start_BTF __ksym;
> extern const void __stop_BTF __ksym;
> extern const void __per_cpu_start __ksym;
> +extern const void fake_dst_ops __ksym;
> /* non-existing symbol, weak, default to zero */
> extern const void bpf_link_fops1 __ksym __weak;
>
> @@ -23,6 +25,7 @@ int handler(const void *ctx)
> out__bpf_link_fops = (__u64)&bpf_link_fops;
> out__btf_size = (__u64)(&__stop_BTF - &__start_BTF);
> out__per_cpu_start = (__u64)&__per_cpu_start;
> + out__fake_dst_ops = (__u64)&fake_dst_ops;
>
> out__bpf_link_fops1 = (__u64)&bpf_link_fops1;
This patch fixed the issue in libbpf such that
the suffix '.llvm.<hash>' will be ignored during comparison of
bpf prog ksym vs. symbols in /proc/kallsyms, this resolved the issue.
Currently, only static variables in /proc/kallsyms are checked
with '.llvm.<hash>' suffix since in bpf programs function ksyms
with '.llvm.<hash>' suffix are most likely kfunc's and unlikely
to be cross-file inlined.
Note that currently kernel does not support gcc build with lto.
[1] https://lore.kernel.org/bpf/20240302165017.1627295-1-yonghong.song@linux.dev/
[2] https://github.com/llvm/llvm-project/blob/release/18.x/llvm/include/llvm/IR/ModuleSummaryIndex.h#L1714-L1719
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041458.1198161-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF verifier emits "unknown func" message when given BPF program type
does not support BPF helper. This message may be confusing for users, as
important context that helper is unknown only to current program type is
not provided.
This patch changes message to "program of this type cannot use helper "
and aligns dependent code in libbpf and tests. Any suggestions on
improving/changing this message are welcome.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20240325152210.377548-1-yatsenko@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Please note that the `libbpf` authoritative source code is developed as part of bpf-next Linux source tree under tools/lib/bpf subdirectory and is periodically synced to Github. As such, all the libbpf changes should be sent to BPF mailing list, please don't open PRs here unless you are changing Github-specific parts of libbpf (e.g., Github-specific Makefile).
@@ -12,3 +12,4 @@ xdp_bonding/xdp_bonding_features # started failing after net merge from 359e
tc_redirect/tc_redirect_dtime # uapi breakage after net-next commit 885c36e59f46 ("net: Re-use and set mono_delivery_time bit for userspace tstamp packets")
migrate_reuseport/IPv4 TCP_NEW_SYN_RECV reqsk_timer_handler # flaky, under investigation
migrate_reuseport/IPv6 TCP_NEW_SYN_RECV reqsk_timer_handler # flaky, under investigation
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
