In commit 4794f18bf4 ("sync: Sync .mailmap entries"), we updated the
sync-up script to automatically update libbpf's .mailmap; however, the
script would not take care of committing the changes. Let's address
this.
The code is copied and adapted from the part where we commit changes to
src/bpf_helper_defs.h.
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Previous attempt to fix the handling of nulled-out (from skeleton)
struct_ops program is working well only if struct_ops program is defined
as non-autoloaded by default (i.e., has SEC("?struct_ops") annotation,
with question mark).
Unfortunately, that fix is incomplete due to how
bpf_object_adjust_struct_ops_autoload() is marking referenced or
non-referenced struct_ops program as autoloaded (or not). Because
bpf_object_adjust_struct_ops_autoload() is run after
bpf_map__init_kern_struct_ops() step, which sets program slot to NULL,
such programs won't be considered "referenced", and so its autoload
property won't be changed.
This all sounds convoluted and it is, but the desire is to have as
natural behavior (as far as struct_ops usage is concerned) as possible.
This fix is redoing the original fix but makes it work for
autoloaded-by-default struct_ops programs as well. We achieve this by
forcing prog->autoload to false if prog was declaratively set for some
struct_ops map, but then nulled-out from skeleton (programmatically).
This achieves desired effect of not autoloading it. If such program is
still referenced somewhere else (different struct_ops map or different
callback field), it will get its autoload property adjusted by
bpf_object_adjust_struct_ops_autoload() later.
We also fix selftest, which accidentally used SEC("?struct_ops")
annotation. It was meant to use autoload-by-default program from the
very beginning.
Fixes: f973fccd43d3 ("libbpf: handle nulled-out program in struct_ops correctly")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240501041706.3712608-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In some situations, it is useful to explicitly specify a kernel module
to search for a tracing program target (e.g. when a function of the same
name exists in multiple modules or in vmlinux).
This patch enables that by allowing the "module:function" syntax for the
find_kernel_btf_id function. Thanks to this, the syntax can be used both
from a SEC macro (i.e. `SEC(fentry/module:function)`) and via the
bpf_program__set_attach_target API call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9085a8cb9a552de98e554deb22ff7e977d025440.1714469650.git.vmalik@redhat.com
Adding support to attach program in kprobe session mode
with bpf_program__attach_kprobe_multi_opts function.
Adding session bool to bpf_kprobe_multi_opts struct that allows
to load and attach the bpf program via kprobe session.
the attachment to create kprobe multi session.
Also adding new program loader section that allows:
SEC("kprobe.session/bpf_fentry_test*")
and loads/attaches kprobe program as kprobe session.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-5-jolsa@kernel.org
Adding support to attach bpf program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two kprobe multi links.
Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the bpf program on return
probe simply by returning zero or non zero from the entry bpf
program execution to execute or not the bpf program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-2-jolsa@kernel.org
If struct_ops has one of program callbacks set declaratively and host
kernel is old and doesn't support this callback, libbpf will allow to
load such struct_ops as long as that callback was explicitly nulled-out
(presumably through skeleton). This is all working correctly, except we
won't reset corresponding program slot to NULL before bailing out, which
will lead to libbpf not detecting that BPF program has to be not
auto-loaded. Fix this by unconditionally resetting corresponding program
slot to NULL.
Fixes: c911fc61a7ce ("libbpf: Skip zeroed or null fields if not found in the kernel type.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240428030954.3918764-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The definition of bpf_tail_call_static in tools/lib/bpf/bpf_helpers.h
is guarded by a preprocessor check to assure that clang is recent
enough to support it. This patch updates the guard so the function is
compiled when using GCC 13 or later as well.
Tested in bpf-next master. No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240426145158.14409-1-jose.marchesi@oracle.com
Two important arguments in RTT estimation, mrtt and srtt, are passed to
tcp_bpf_rtt(), so that bpf programs get more information about RTT
computation in BPF_SOCK_OPS_RTT_CB.
The difference between bpf_sock_ops->srtt_us and the srtt here is: the
former is an old rtt before update, while srtt passed by tcp_bpf_rtt()
is that after update.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240425161724.73707-2-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The kernel repository has a .mailmap file to remap author names and
email addresses to their desired format in Git logs (for details, see
gitmailmap documentation [0]). Alas, this is only visible for author
information when looking at the logs locally, as GitHub does not support
mailmaps at the moment [1].
This commit adds a .mailmap file for libbpf, automatically generated
from the kernel's version. The script to generate the .mailmap is added,
too: it works by grepping email addresses from authors in the
repository, and collecting all lines ending with this address in the
kernel's .mailmap - in other words, all lines where this address is used
as a pattern for a remapping.
To keep the .mailmap up-to-date, add a call to the script to
sync-kernel.sh.
[0] https://git-scm.com/docs/gitmailmap
[1] https://github.com/orgs/community/discussions/22518
Signed-off-by: Quentin Monnet <qmo@kernel.org>
When dumping a character array, libbpf will watch for a '\0' and set
is_array_terminated=true if found. This prevents libbpf from printing
the remaining characters of the array, treating it as a nul-terminated
string.
However, once this flag is set, it's never reset, leading to subsequent
characters array not being printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
],
This patch saves the is_array_terminated flag and restores its
default (false) value before looping over the elements of an array,
then restores it afterward. This way, libbpf's behavior is unchanged
when dumping the characters of an array, but subsequent arrays are
printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
[
'l',
'o',
],
],
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240413211258.134421-3-qde@naccy.de
In btf_dump_array_data(), libbpf will call btf_dump_dump_type_data() for
each element. For an array of characters, each element will be
processed the following way:
- btf_dump_dump_type_data() is called to print the character
- btf_dump_data_pfx() prefixes the current line with the proper number
of indentations
- btf_dump_int_data() is called to print the character
- After the last character is printed, btf_dump_dump_type_data() calls
btf_dump_data_pfx() before writing the closing bracket
However, for an array containing characters, btf_dump_int_data() won't
print any '\0' and subsequent characters. This leads to situations where
the line prefix is written, no character is added, then the prefix is
written again before adding the closing bracket:
(struct sk_metadata){
.str_array = (__u8[14])[
'H',
'e',
'l',
'l',
'o',
],
This change solves this issue by printing the '\0' character, which
has two benefits:
- The bracket closing the array is properly aligned
- It's clear from a user point of view that libbpf uses '\0' as a
terminator for arrays of characters.
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240413211258.134421-2-qde@naccy.de
Add bpf_link support for sk_msg and sk_skb programs. We have an
internal request to support bpf_link for sk_msg programs so user
space can have a uniform handling with bpf_link based libbpf
APIs. Using bpf_link based libbpf API also has a benefit which
makes system robust by decoupling prog life cycle and
attachment life cycle.
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240410043527.3737160-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In some cases, instead of always consuming all items from ring buffers
in a greedy way, we may want to consume up to a certain amount of items,
for example when we need to copy items from the BPF ring buffer to a
limited user buffer.
This change allows to set an upper limit to the amount of items consumed
from one or more ring buffers.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240406092005.92399-3-andrea.righi@canonical.com
The struct bpf_fib_lookup is supposed to be of size 64. A recent commit
59b418c7063d ("bpf: Add a check for struct bpf_fib_lookup size") added
a static assertion to check this property so that future changes to the
structure will not accidentally break this assumption.
As it immediately turned out, on some 32-bit arm systems, when AEABI=n,
the total size of the structure was equal to 68, see [1]. This happened
because the bpf_fib_lookup structure contains a union of two 16-bit
fields:
union {
__u16 tot_len;
__u16 mtu_result;
};
which was supposed to compile to a 16-bit-aligned 16-bit field. On the
aforementioned setups it was instead both aligned and padded to 32-bits.
Declare this inner union as __attribute__((packed, aligned(2))) such
that it always is of size 2 and is aligned to 16 bits.
[1] https://lore.kernel.org/all/CA+G9fYtsoP51f-oP_Sp5MOq-Ffv8La2RztNpwvE6+R1VtFiLrw@mail.gmail.com/#t
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: e1850ea9bd9e ("bpf: bpf_fib_lookup return MTU value as output when looked up")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240403123303.1452184-1-aspsk@isovalent.com
With CONFIG_LTO_CLANG_THIN enabled, with some of previous
version of kernel code base ([1]), I hit the following
error:
test_ksyms:PASS:kallsyms_fopen 0 nsec
test_ksyms:FAIL:ksym_find symbol 'bpf_link_fops' not found
#118 ksyms:FAIL
The reason is that 'bpf_link_fops' is renamed to
bpf_link_fops.llvm.8325593422554671469
Due to cross-file inlining, the static variable 'bpf_link_fops'
in syscall.c is used by a function in another file. To avoid
potential duplicated names, the llvm added suffix
'.llvm.<hash>' ([2]) to 'bpf_link_fops' variable.
Such renaming caused a problem in libbpf if 'bpf_link_fops'
is used in bpf prog as a ksym but 'bpf_link_fops' does not
match any symbol in /proc/kallsyms.
To fix this issue, libbpf needs to understand that suffix '.llvm.<hash>'
is caused by clang lto kernel and to process such symbols properly.
With latest bpf-next code base built with CONFIG_LTO_CLANG_THIN,
I cannot reproduce the above failure any more. But such an issue
could happen with other symbols or in the future for bpf_link_fops symbol.
For example, with my current kernel, I got the following from
/proc/kallsyms:
ffffffff84782154 d __func__.net_ratelimit.llvm.6135436931166841955
ffffffff85f0a500 d tk_core.llvm.726630847145216431
ffffffff85fdb960 d __fs_reclaim_map.llvm.10487989720912350772
ffffffff864c7300 d fake_dst_ops.llvm.54750082607048300
I could not easily create a selftest to test newly-added
libbpf functionality with a static C test since I do not know
which symbol is cross-file inlined. But based on my particular kernel,
the following test change can run successfully.
> diff --git a/tools/testing/selftests/bpf/prog_tests/ksyms.c b/tools/testing/selftests/bpf/prog_tests/ksyms.c
> index 6a86d1f07800..904a103f7b1d 100644
> --- a/tools/testing/selftests/bpf/prog_tests/ksyms.c
> +++ b/tools/testing/selftests/bpf/prog_tests/ksyms.c
> @@ -42,6 +42,7 @@ void test_ksyms(void)
> ASSERT_EQ(data->out__bpf_link_fops, link_fops_addr, "bpf_link_fops");
> ASSERT_EQ(data->out__bpf_link_fops1, 0, "bpf_link_fops1");
> ASSERT_EQ(data->out__btf_size, btf_size, "btf_size");
> + ASSERT_NEQ(data->out__fake_dst_ops, 0, "fake_dst_ops");
> ASSERT_EQ(data->out__per_cpu_start, per_cpu_start_addr, "__per_cpu_start");
>
> cleanup:
> diff --git a/tools/testing/selftests/bpf/progs/test_ksyms.c b/tools/testing/selftests/bpf/progs/test_ksyms.c
> index 6c9cbb5a3bdf..fe91eef54b66 100644
> --- a/tools/testing/selftests/bpf/progs/test_ksyms.c
> +++ b/tools/testing/selftests/bpf/progs/test_ksyms.c
> @@ -9,11 +9,13 @@ __u64 out__bpf_link_fops = -1;
> __u64 out__bpf_link_fops1 = -1;
> __u64 out__btf_size = -1;
> __u64 out__per_cpu_start = -1;
> +__u64 out__fake_dst_ops = -1;
>
> extern const void bpf_link_fops __ksym;
> extern const void __start_BTF __ksym;
> extern const void __stop_BTF __ksym;
> extern const void __per_cpu_start __ksym;
> +extern const void fake_dst_ops __ksym;
> /* non-existing symbol, weak, default to zero */
> extern const void bpf_link_fops1 __ksym __weak;
>
> @@ -23,6 +25,7 @@ int handler(const void *ctx)
> out__bpf_link_fops = (__u64)&bpf_link_fops;
> out__btf_size = (__u64)(&__stop_BTF - &__start_BTF);
> out__per_cpu_start = (__u64)&__per_cpu_start;
> + out__fake_dst_ops = (__u64)&fake_dst_ops;
>
> out__bpf_link_fops1 = (__u64)&bpf_link_fops1;
This patch fixed the issue in libbpf such that
the suffix '.llvm.<hash>' will be ignored during comparison of
bpf prog ksym vs. symbols in /proc/kallsyms, this resolved the issue.
Currently, only static variables in /proc/kallsyms are checked
with '.llvm.<hash>' suffix since in bpf programs function ksyms
with '.llvm.<hash>' suffix are most likely kfunc's and unlikely
to be cross-file inlined.
Note that currently kernel does not support gcc build with lto.
[1] https://lore.kernel.org/bpf/20240302165017.1627295-1-yonghong.song@linux.dev/
[2] https://github.com/llvm/llvm-project/blob/release/18.x/llvm/include/llvm/IR/ModuleSummaryIndex.h#L1714-L1719
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041458.1198161-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF verifier emits "unknown func" message when given BPF program type
does not support BPF helper. This message may be confusing for users, as
important context that helper is unknown only to current program type is
not provided.
This patch changes message to "program of this type cannot use helper "
and aligns dependent code in libbpf and tests. Any suggestions on
improving/changing this message are welcome.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20240325152210.377548-1-yatsenko@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since its going directly to the syscall to avoid not having
memfd_create() available in some systems, do the same for its
MFD_CLOEXEC flags, defining it if not available.
This fixes the build in those systems, noticed while building perf on a
set of build containers.
Fixes: 9fa5e1a180aa639f ("libbpf: Call memfd_create() syscall directly")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ZfxZ9nCyKvwmpKkE@x1
It's been reported that (void *)map->map_extra is causing compilation
warnings on 32-bit architectures. It's easy enough to fix this by
casting to long first.
Fixes: 79ff13e99169 ("libbpf: Add support for bpf_arena.")
Reported-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319215143.1279312-1-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The selftests use
to tell LLVM about special pointers. For LLVM there is nothing "arena"
about them. They are simply pointers in a different address space.
Hence LLVM diff https://github.com/llvm/llvm-project/pull/85161 renamed:
. macro __BPF_FEATURE_ARENA_CAST -> __BPF_FEATURE_ADDR_SPACE_CAST
. global variables in __attribute__((address_space(N))) are now
placed in section named ".addr_space.N" instead of ".arena.N".
Adjust libbpf, bpftool, and selftests to match LLVM.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20240315021834.62988-3-alexei.starovoitov@gmail.com
Wire up BPF cookie for raw tracepoint programs (both BTF and non-BTF
aware variants). This brings them up to part w.r.t. BPF cookie usage
with classic tracepoint and fentry/fexit programs.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-4-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
libbpf creates bpf_program/bpf_map structs for each program/map that
user defines, but it allows to disable creating/loading those objects in
kernel, in that case they won't have associated file descriptor
(fd < 0). Such functionality is used for backward compatibility
with some older kernels.
Nothing prevents users from passing these maps or programs with no
kernel counterpart to libbpf APIs. This change introduces explicit
checks for kernel objects existence, aiming to improve visibility of
those edge cases and provide meaningful warnings to users.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240318131808.95959-1-yatsenko@meta.com
Accept additional fields of a struct_ops type with all zero values even if
these fields are not in the corresponding type in the kernel. This provides
a way to be backward compatible. User space programs can use the same map
on a machine running an old kernel by clearing fields that do not exist in
the kernel.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240313214139.685112-2-thinker.li@gmail.com
In bpf_objec_load_prog(), there's no guarantee that obj->btf is non-NULL
when passing it to btf__fd(), and this function does not perform any
check before dereferencing its argument (as bpf_object__btf_fd() used to
do). As a consequence, we get segmentation fault errors in bpftool (for
example) when trying to load programs that come without BTF information.
v2: Keep btf__fd() in the fix instead of reverting to bpf_object__btf_fd().
Fixes: df7c3f7d3a3d ("libbpf: make uniform use of btf__fd() accessor inside libbpf")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314150438.232462-1-qmo@kernel.org
LLVM automatically places __arena variables into ".arena.1" ELF section.
In order to use such global variables bpf program must include definition
of arena map in ".maps" section, like:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
__uint(map_flags, BPF_F_MMAPABLE);
__uint(max_entries, 1000); /* number of pages */
__ulong(map_extra, 2ull << 44); /* start of mmap() region */
} arena SEC(".maps");
libbpf recognizes both uses of arena and creates single `struct bpf_map *`
instance in libbpf APIs.
".arena.1" ELF section data is used as initial data image, which is exposed
through skeleton and bpf_map__initial_value() to the user, if they need to tune
it before the load phase. During load phase, this initial image is copied over
into mmap()'ed region corresponding to arena, and discarded.
Few small checks here and there had to be added to make sure this
approach works with bpf_map__initial_value(), mostly due to hard-coded
assumption that map->mmaped is set up with mmap() syscall and should be
munmap()'ed. For arena, .arena.1 can be (much) smaller than maximum
arena size, so this smaller data size has to be tracked separately.
Given it is enforced that there is only one arena for entire bpf_object
instance, we just keep it in a separate field. This can be generalized
if necessary later.
All global variables from ".arena.1" section are accessible from user space
via skel->arena->name_of_var.
For bss/data/rodata the skeleton/libbpf perform the following sequence:
1. addr = mmap(MAP_ANONYMOUS)
2. user space optionally modifies global vars
3. map_fd = bpf_create_map()
4. bpf_update_map_elem(map_fd, addr) // to store values into the kernel
5. mmap(addr, MAP_FIXED, map_fd)
after step 5 user spaces see the values it wrote at step 2 at the same addresses
arena doesn't support update_map_elem. Hence skeleton/libbpf do:
1. addr = malloc(sizeof SEC ".arena.1")
2. user space optionally modifies global vars
3. map_fd = bpf_create_map(MAP_TYPE_ARENA)
4. real_addr = mmap(map->map_extra, MAP_SHARED | MAP_FIXED, map_fd)
5. memcpy(real_addr, addr) // this will fault-in and allocate pages
At the end look and feel of global data vs __arena global data is the same from
bpf prog pov.
Another complication is:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
} arena SEC(".maps");
int __arena foo;
int bar;
ptr1 = &foo; // relocation against ".arena.1" section
ptr2 = &arena; // relocation against ".maps" section
ptr3 = &bar; // relocation against ".bss" section
Fo the kernel ptr1 and ptr2 has point to the same arena's map_fd
while ptr3 points to a different global array's map_fd.
For the verifier:
ptr1->type == unknown_scalar
ptr2->type == const_ptr_to_map
ptr3->type == ptr_to_map_value
After verification, from JIT pov all 3 ptr-s are normal ld_imm64 insns.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-11-alexei.starovoitov@gmail.com
mmap() bpf_arena right after creation, since the kernel needs to
remember the address returned from mmap. This is user_vm_start.
LLVM will generate bpf_arena_cast_user() instructions where
necessary and JIT will add upper 32-bit of user_vm_start
to such pointers.
Fix up bpf_map_mmap_sz() to compute mmap size as
map->value_size * map->max_entries for arrays and
PAGE_SIZE * map->max_entries for arena.
Don't set BTF at arena creation time, since it doesn't support it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-9-alexei.starovoitov@gmail.com
Introduce bpf_arena, which is a sparse shared memory region between the bpf
program and user space.
Use cases:
1. User space mmap-s bpf_arena and uses it as a traditional mmap-ed
anonymous region, like memcached or any key/value storage. The bpf
program implements an in-kernel accelerator. XDP prog can search for
a key in bpf_arena and return a value without going to user space.
2. The bpf program builds arbitrary data structures in bpf_arena (hash
tables, rb-trees, sparse arrays), while user space consumes it.
3. bpf_arena is a "heap" of memory from the bpf program's point of view.
The user space may mmap it, but bpf program will not convert pointers
to user base at run-time to improve bpf program speed.
Initially, the kernel vm_area and user vma are not populated. User space
can fault in pages within the range. While servicing a page fault,
bpf_arena logic will insert a new page into the kernel and user vmas. The
bpf program can allocate pages from that region via
bpf_arena_alloc_pages(). This kernel function will insert pages into the
kernel vm_area. The subsequent fault-in from user space will populate that
page into the user vma. The BPF_F_SEGV_ON_FAULT flag at arena creation time
can be used to prevent fault-in from user space. In such a case, if a page
is not allocated by the bpf program and not present in the kernel vm_area,
the user process will segfault. This is useful for use cases 2 and 3 above.
bpf_arena_alloc_pages() is similar to user space mmap(). It allocates pages
either at a specific address within the arena or allocates a range with the
maple tree. bpf_arena_free_pages() is analogous to munmap(), which frees
pages and removes the range from the kernel vm_area and from user process
vmas.
bpf_arena can be used as a bpf program "heap" of up to 4GB. The speed of
bpf program is more important than ease of sharing with user space. This is
use case 3. In such a case, the BPF_F_NO_USER_CONV flag is recommended.
It will tell the verifier to treat the rX = bpf_arena_cast_user(rY)
instruction as a 32-bit move wX = wY, which will improve bpf prog
performance. Otherwise, bpf_arena_cast_user is translated by JIT to
conditionally add the upper 32 bits of user vm_start (if the pointer is not
NULL) to arena pointers before they are stored into memory. This way, user
space sees them as valid 64-bit pointers.
Diff https://github.com/llvm/llvm-project/pull/84410 enables LLVM BPF
backend generate the bpf_addr_space_cast() instruction to cast pointers
between address_space(1) which is reserved for bpf_arena pointers and
default address space zero. All arena pointers in a bpf program written in
C language are tagged as __attribute__((address_space(1))). Hence, clang
provides helpful diagnostics when pointers cross address space. Libbpf and
the kernel support only address_space == 1. All other address space
identifiers are reserved.
rX = bpf_addr_space_cast(rY, /* dst_as */ 1, /* src_as */ 0) tells the
verifier that rX->type = PTR_TO_ARENA. Any further operations on
PTR_TO_ARENA register have to be in the 32-bit domain. The verifier will
mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate
them as kern_vm_start + 32bit_addr memory accesses. The behavior is similar
to copy_from_kernel_nofault() except that no address checks are necessary.
The address is guaranteed to be in the 4GB range. If the page is not
present, the destination register is zeroed on read, and the operation is
ignored on write.
rX = bpf_addr_space_cast(rY, 0, 1) tells the verifier that rX->type =
unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set, then the
verifier converts such cast instructions to mov32. Otherwise, JIT will emit
native code equivalent to:
rX = (u32)rY;
if (rY)
rX |= clear_lo32_bits(arena->user_vm_start); /* replace hi32 bits in rX */
After such conversion, the pointer becomes a valid user pointer within
bpf_arena range. The user process can access data structures created in
bpf_arena without any additional computations. For example, a linked list
built by a bpf program can be walked natively by user space.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-2-alexei.starovoitov@gmail.com
__uint() macro that is used to specify map attributes like:
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(map_flags, BPF_F_MMAPABLE);
It is limited to 32-bit, since BTF_KIND_ARRAY has u32 "number of elements"
field in "struct btf_array".
Introduce __ulong() macro that allows specifying values bigger than 32-bit.
In map definition "map_extra" is the only u64 field, so far.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-5-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf tree has fixes for xdp_bonding selftests which are not yet in
bpf-next, so add them as temporary CI-only patches.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Optional struct_ops maps are defined using question mark at the start
of the section name, e.g.:
SEC("?.struct_ops")
struct test_ops optional_map = { ... };
This commit teaches libbpf to detect if kernel allows '?' prefix
in datasec names, and if it doesn't then to rewrite such names
by replacing '?' with '_', e.g.:
DATASEC ?.struct_ops -> DATASEC _.struct_ops
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-13-eddyz87@gmail.com
The next patch would add two new section names for struct_ops maps.
To make working with multiple struct_ops sections more convenient:
- remove fields like elf_state->st_ops_{shndx,link_shndx};
- mark section descriptions hosting struct_ops as
elf_sec_desc->sec_type == SEC_ST_OPS;
After these changes struct_ops sections could be processed uniformly
by iterating bpf_object->efile.secs entries.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-11-eddyz87@gmail.com
Automatically select which struct_ops programs to load depending on
which struct_ops maps are selected for automatic creation.
E.g. for the BPF code below:
SEC("struct_ops/test_1") int BPF_PROG(foo) { ... }
SEC("struct_ops/test_2") int BPF_PROG(bar) { ... }
SEC(".struct_ops.link")
struct test_ops___v1 A = {
.foo = (void *)foo
};
SEC(".struct_ops.link")
struct test_ops___v2 B = {
.foo = (void *)foo,
.bar = (void *)bar,
};
And the following libbpf API calls:
bpf_map__set_autocreate(skel->maps.A, true);
bpf_map__set_autocreate(skel->maps.B, false);
The autoload would be enabled for program 'foo' and disabled for
program 'bar'.
During load, for each struct_ops program P, referenced from some
struct_ops map M:
- set P.autoload = true if M.autocreate is true for some M;
- set P.autoload = false if M.autocreate is false for all M;
- don't change P.autoload, if P is not referenced from any map.
Do this after bpf_object__init_kern_struct_ops_maps()
to make sure that shadow vars assignment is done.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-9-eddyz87@gmail.com
Skip load steps for struct_ops maps not marked for automatic creation.
This should allow to load bpf object in situations like below:
SEC("struct_ops/foo") int BPF_PROG(foo) { ... }
SEC("struct_ops/bar") int BPF_PROG(bar) { ... }
struct test_ops___v1 {
int (*foo)(void);
};
struct test_ops___v2 {
int (*foo)(void);
int (*does_not_exist)(void);
};
SEC(".struct_ops.link")
struct test_ops___v1 map_for_old = {
.test_1 = (void *)foo
};
SEC(".struct_ops.link")
struct test_ops___v2 map_for_new = {
.test_1 = (void *)foo,
.does_not_exist = (void *)bar
};
Suppose program is loaded on old kernel that does not have definition
for 'does_not_exist' struct_ops member. After this commit it would be
possible to load such object file after the following tweaks:
bpf_program__set_autoload(skel->progs.bar, false);
bpf_map__set_autocreate(skel->maps.map_for_new, false);
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20240306104529.6453-4-eddyz87@gmail.com
Enforce the following existing limitation on struct_ops programs based
on kernel BTF id instead of program-local BTF id:
struct_ops BPF prog can be re-used between multiple .struct_ops &
.struct_ops.link as long as it's the same struct_ops struct
definition and the same function pointer field
This allows reusing same BPF program for versioned struct_ops map
definitions, e.g.:
SEC("struct_ops/test")
int BPF_PROG(foo) { ... }
struct some_ops___v1 { int (*test)(void); };
struct some_ops___v2 { int (*test)(void); };
SEC(".struct_ops.link") struct some_ops___v1 a = { .test = foo }
SEC(".struct_ops.link") struct some_ops___v2 b = { .test = foo }
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-3-eddyz87@gmail.com
E.g. allow the following struct_ops definitions:
struct bpf_testmod_ops___v1 { int (*test)(void); };
struct bpf_testmod_ops___v2 { int (*test)(void); };
SEC(".struct_ops.link")
struct bpf_testmod_ops___v1 a = { .test = ... }
SEC(".struct_ops.link")
struct bpf_testmod_ops___v2 b = { .test = ... }
Where both bpf_testmod_ops__v1 and bpf_testmod_ops__v2 would be
resolved as 'struct bpf_testmod_ops' from kernel BTF.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-2-eddyz87@gmail.com
Introduce may_goto instruction that from the verifier pov is similar to
open coded iterators bpf_for()/bpf_repeat() and bpf_loop() helper, but it
doesn't iterate any objects.
In assembly 'may_goto' is a nop most of the time until bpf runtime has to
terminate the program for whatever reason. In the current implementation
may_goto has a hidden counter, but other mechanisms can be used.
For programs written in C the later patch introduces 'cond_break' macro
that combines 'may_goto' with 'break' statement and has similar semantics:
cond_break is a nop until bpf runtime has to break out of this loop.
It can be used in any normal "for" or "while" loop, like
for (i = zero; i < cnt; cond_break, i++) {
The verifier recognizes that may_goto is used in the program, reserves
additional 8 bytes of stack, initializes them in subprog prologue, and
replaces may_goto instruction with:
aux_reg = *(u64 *)(fp - 40)
if aux_reg == 0 goto pc+off
aux_reg -= 1
*(u64 *)(fp - 40) = aux_reg
may_goto instruction can be used by LLVM to implement __builtin_memcpy,
__builtin_strcmp.
may_goto is not a full substitute for bpf_for() macro.
bpf_for() doesn't have induction variable that verifiers sees,
so 'i' in bpf_for(i, 0, 100) is seen as imprecise and bounded.
But when the code is written as:
for (i = 0; i < 100; cond_break, i++)
the verifier see 'i' as precise constant zero,
hence cond_break (aka may_goto) doesn't help to converge the loop.
A static or global variable can be used as a workaround:
static int zero = 0;
for (i = zero; i < 100; cond_break, i++) // works!
may_goto works well with arena pointers that don't need to be bounds
checked on access. Load/store from arena returns imprecise unbounded
scalar and loops with may_goto pass the verifier.
Reserve new opcode BPF_JMP | BPF_JCOND for may_goto insn.
JCOND stands for conditional pseudo jump.
Since goto_or_nop insn was proposed, it may use the same opcode.
may_goto vs goto_or_nop can be distinguished by src_reg:
code = BPF_JMP | BPF_JCOND
src_reg = 0 - may_goto
src_reg = 1 - goto_or_nop
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-2-alexei.starovoitov@gmail.com
Convert st_ops->data to the shadow type of the struct_ops map. The shadow
type of a struct_ops type is a variant of the original struct type
providing a way to access/change the values in the maps of the struct_ops
type.
bpf_map__initial_value() will return st_ops->data for struct_ops types. The
skeleton is going to use it as the pointer to the shadow type of the
original struct type.
One of the main differences between the original struct type and the shadow
type is that all function pointers of the shadow type are converted to
pointers of struct bpf_program. Users can replace these bpf_program
pointers with other BPF programs. The st_ops->progs[] will be updated
before updating the value of a map to reflect the changes made by users.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-3-thinker.li@gmail.com
For a struct_ops map, btf_value_type_id is the type ID of it's struct
type. This value is required by bpftool to generate skeleton including
pointers of shadow types. The code generator gets the type ID from
bpf_map__btf_value_type_id() in order to get the type information of the
struct type of a map.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-2-thinker.li@gmail.com
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
Add support for the independent control state machine per IEEE
802.1AX-2008 5.4.15 in addition to the existing implementation of the
coupled control state machine.
Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in
the LACP MUX state machine for separated handling of an initial
Collecting state before the Collecting and Distributing state. This
enables a port to be in a state where it can receive incoming packets
while not still distributing. This is useful for reducing packet loss when
a port begins distributing before its partner is able to collect.
Added new functions such as bond_set_slave_tx_disabled_flags and
bond_set_slave_rx_enabled_flags to precisely manage the port's collecting
and distributing states. Previously, there was no dedicated method to
disable TX while keeping RX enabled, which this patch addresses.
Note that the regular flow process in the kernel's bonding driver remains
unaffected by this patch. The extension requires explicit opt-in by the
user (in order to ensure no disruptions for existing setups) via netlink
support using the new bonding parameter coupled_control. The default value
for coupled_control is set to 1 so as to preserve existing behaviour.
Signed-off-by: Aahil Awatramani <aahila@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The batch lookup and lookup_and_delete APIs have two parameters,
in_batch and out_batch, to facilitate iterative
lookup/lookup_and_deletion operations for supported maps. Except NULL
for in_batch at the start of these two batch operations, both parameters
need to point to memory equal or larger than the respective map key
size, except for various hashmaps (hash, percpu_hash, lru_hash,
lru_percpu_hash) where the in_batch/out_batch memory size should be
at least 4 bytes.
Document these semantics to clarify the API.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240221211838.1241578-1-martin.kelly@crowdstrike.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In some situations, if you fail to zero-initialize the
bpf_{prog,map,btf,link}_info structs supplied to the set of LIBBPF
helpers bpf_{prog,map,btf,link}_get_info_by_fd(), you can expect the
helper to return an error. This can possibly leave people in a
situation where they're scratching their heads for an unnnecessary
amount of time. Make an explicit remark about the requirement of
zero-initializing the supplied bpf_{prog,map,btf,link}_info structs
for the respective LIBBPF helpers.
Internally, LIBBPF helpers bpf_{prog,map,btf,link}_get_info_by_fd()
call into bpf_obj_get_info_by_fd() where the bpf(2)
BPF_OBJ_GET_INFO_BY_FD command is used. This specific command is
effectively backed by restrictions enforced by the
bpf_check_uarg_tail_zero() helper. This function ensures that if the
size of the supplied bpf_{prog,map,btf,link}_info structs are larger
than what the kernel can handle, trailing bits are zeroed. This can be
a problem when compiling against UAPI headers that don't necessarily
match the sizes of the same underlying types known to the kernel.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/ZcyEb8x4VbhieWsL@google.com
Due to internal differences between LLVM and GCC the current
implementation for the CO-RE macros does not fit GCC parser, as it will
optimize those expressions even before those would be accessible by the
BPF backend.
As examples, the following would be optimized out with the original
definitions:
- As enums are converted to their integer representation during
parsing, the IR would not know how to distinguish an integer
constant from an actual enum value.
- Types need to be kept as temporary variables, as the existing type
casts of the 0 address (as expanded for LLVM), are optimized away by
the GCC C parser, never really reaching GCCs IR.
Although, the macros appear to add extra complexity, the expanded code
is removed from the compilation flow very early in the compilation
process, not really affecting the quality of the generated assembly.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240213173543.1397708-1-cupertino.miranda@oracle.com
We get:
libbpf: struct_ops init_kern: struct bpf_dummy_ops is not found in kernel BTF
So even though it's irrelevant to the subtests we do want to test,
entire test has to be skipped, unfortunately.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
When the feature_flags and xdp_zc_max_segs fields were added to the libbpf
bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro.
This causes libbpf to write to those fields unconditionally, which means
that programs compiled against an older version of libbpf (with a smaller
size of the bpf_xdp_query_opts struct) will have its stack corrupted by
libbpf writing out of bounds.
The patch adding the feature_flags field has an early bail out if the
feature_flags field is not part of the opts struct (via the OPTS_HAS)
macro, but the patch adding xdp_zc_max_segs does not. For consistency, this
fix just changes the assignments to both fields to use the OPTS_SET()
macro.
Fixes: 13ce2daa259a ("xsk: add new netlink attribute dedicated for ZC max frags")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240206125922.1992815-1-toke@redhat.com
If PERF_EVENT program has __arg_ctx argument with matching
architecture-specific pt_regs/user_pt_regs/user_regs_struct pointer
type, libbpf should still perform type rewrite for old kernels, but not
emit the warning. Fix copy/paste from kernel code where 0 is meant to
signify "no error" condition. For libbpf we need to return "true" to
proceed with type rewrite (which for PERF_EVENT program will be
a canonical `struct bpf_perf_event_data *` type).
Fixes: 9eea8fafe33e ("libbpf: fix __arg_ctx type enforcement for perf_event programs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240206002243.1439450-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allowlist test_global_funcs/arg_tag_ctx* and a few of
verifier_global_subprogs subtests that validate libbpf's logic for
rewriting __arg_ctx globl subprog argument types on kernels that don't
natively support __arg_ctx.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Another API that was declared in libbpf.map but actual implementation
was missing. btf_ext__get_raw_data() was intended as a discouraged alias
to consistently-named btf_ext__raw_data(), so make this an actuality.
Fixes: 20eccf29e297 ("libbpf: hide and discourage inconsistently named getters")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240201172027.604869-5-andrii@kernel.org
LIBBPF_API annotation seems missing on libbpf_set_memlock_rlim API, so
add it to make this API callable from libbpf's shared library version.
Fixes: e542f2c4cd16 ("libbpf: Auto-bump RLIMIT_MEMLOCK if kernel needs it for BPF")
Fixes: ab9a5a05dc48 ("libbpf: fix up few libbpf.map problems")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240201172027.604869-3-andrii@kernel.org
After recent changes, Coverity complained about inconsistent null checks
in kernel_supports() function:
kernel_supports(const struct bpf_object *obj, ...)
[...]
// var_compare_op: Comparing obj to null implies that obj might be null
if (obj && obj->gen_loader)
return true;
// var_deref_op: Dereferencing null pointer obj
if (obj->token_fd)
return feat_supported(obj->feat_cache, feat_id);
[...]
- The original null check was introduced by commit [0], which introduced
a call `kernel_supports(NULL, ...)` in function bump_rlimit_memlock();
- This call was refactored to use `feat_supported(NULL, ...)` in commit [1].
Looking at all places where kernel_supports() is called:
- There is either `obj->...` access before the call;
- Or `obj` comes from `prog->obj` expression, where `prog` comes from
enumeration of programs in `obj`;
- Or `obj` comes from `prog->obj`, where `prog` is a parameter to one
of the API functions:
- bpf_program__attach_kprobe_opts;
- bpf_program__attach_kprobe;
- bpf_program__attach_ksyscall.
Assuming correct API usage, it appears that `obj` can never be null when
passed to kernel_supports(). Silence the Coverity warning by removing
redundant null check.
[0] e542f2c4cd16 ("libbpf: Auto-bump RLIMIT_MEMLOCK if kernel needs it for BPF")
[1] d6dd1d49367a ("libbpf: Further decouple feature checking logic from bpf_object")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240131212615.20112-1-eddyz87@gmail.com
Add bpf_core_cast() macro that wraps bpf_rdonly_cast() kfunc. It's more
ergonomic than kfunc, as it automatically extracts btf_id with
bpf_core_type_id_kernel(), and works with type names. It also casts result
to (T *) pointer. See the definition of the macro, it's self-explanatory.
libbpf declares bpf_rdonly_cast() extern as __weak __ksym and should be
safe to not conflict with other possible declarations in user code.
But we do have a conflict with current BPF selftests that declare their
externs with first argument as `void *obj`, while libbpf opts into more
permissive `const void *obj`. This causes conflict, so we fix up BPF
selftests uses in the same patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130212023.183765-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add __arg_trusted to annotate global func args that accept trusted
PTR_TO_BTF_ID arguments.
Also add __arg_nullable to combine with __arg_trusted (and maybe other
tags in the future) to force global subprog itself (i.e., callee) to do
NULL checks, as opposed to default non-NULL semantics (and thus caller's
responsibility to ensure non-NULL values).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130000648.2144827-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As CONFIG_DEBUG_INFO_BTF is default off the existing "failed to find
valid kernel BTF" message makes diagnosing the kernel build issue somewhat
cryptic. Add a little more detail with the hope of helping users.
Before:
```
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -3
```
After not accessible:
```
libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -3
```
After not readable:
```
libbpf: failed to read kernel BTF from (/sys/kernel/btf/vmlinux): -1
```
Closes: https://lore.kernel.org/bpf/CAP-5=fU+DN_+Y=Y4gtELUsJxKNDDCOvJzPHvjUVaUoeFAzNnig@mail.gmail.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240125231840.1647951-1-irogers@google.com
This replicates kernel upstream setup and brings READ_ONCE() and
WRITE_ONCE() macros anywhere where linux/kernel.h is included, which is
assumption libbpf code makes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Libbpf got new source code file, features.c, we need to add it to
Makefile here on Github version as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add BPF_CALL_REL() macro implementation into include/linux/filter.h
header, which is now used by libbpf code for feature detection.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
To allow external admin authority to override default BPF FS location
(/sys/fs/bpf) for implicit BPF token creation, teach libbpf to recognize
LIBBPF_BPF_TOKEN_PATH envvar. If it is specified and user application
didn't explicitly specify bpf_token_path option, it will be treated
exactly like bpf_token_path option, overriding default /sys/fs/bpf
location and making BPF token mandatory.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-29-andrii@kernel.org
Add BPF token support to BPF object-level functionality.
BPF token is supported by BPF object logic either as an explicitly
provided BPF token from outside (through BPF FS path), or implicitly
(unless prevented through bpf_object_open_opts).
Implicit mode is assumed to be the most common one for user namespaced
unprivileged workloads. The assumption is that privileged container
manager sets up default BPF FS mount point at /sys/fs/bpf with BPF token
delegation options (delegate_{cmds,maps,progs,attachs} mount options).
BPF object during loading will attempt to create BPF token from
/sys/fs/bpf location, and pass it for all relevant operations
(currently, map creation, BTF load, and program load).
In this implicit mode, if BPF token creation fails due to whatever
reason (BPF FS is not mounted, or kernel doesn't support BPF token,
etc), this is not considered an error. BPF object loading sequence will
proceed with no BPF token.
In explicit BPF token mode, user provides explicitly custom BPF FS mount
point path. In such case, BPF object will attempt to create BPF token
from provided BPF FS location. If BPF token creation fails, that is
considered a critical error and BPF object load fails with an error.
Libbpf provides a way to disable implicit BPF token creation, if it
causes any troubles (BPF token is designed to be completely optional and
shouldn't cause any problems even if provided, but in the world of BPF
LSM, custom security logic can be installed that might change outcome
depending on the presence of BPF token). To disable libbpf's default BPF
token creation behavior user should provide either invalid BPF token FD
(negative), or empty bpf_token_path option.
BPF token presence can influence libbpf's feature probing, so if BPF
object has associated BPF token, feature probing is instructed to use
BPF object-specific feature detection cache and token FD.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-26-andrii@kernel.org
Adjust feature probing callbacks to take into account optional token_fd.
In unprivileged contexts, some feature detectors would fail to detect
kernel support just because BPF program, BPF map, or BTF object can't be
loaded due to privileged nature of those operations. So when BPF object
is loaded with BPF token, this token should be used for feature probing.
This patch is setting support for this scenario, but we don't yet pass
non-zero token FD. This will be added in the next patch.
We also switched BPF cookie detector from using kprobe program to
tracepoint one, as tracepoint is somewhat less dangerous BPF program
type and has higher likelihood of being allowed through BPF token in the
future. This change has no effect on detection behavior.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-25-andrii@kernel.org
Add feat_supported() helper that accepts feature cache instead of
bpf_object. This allows low-level code in bpf.c to not know or care
about higher-level concept of bpf_object, yet it will be able to utilize
custom feature checking in cases where BPF token might influence the
outcome.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-23-andrii@kernel.org
Allow user to specify token_fd for bpf_btf_load() API that wraps
kernel's BPF_BTF_LOAD command. This allows loading BTF from unprivileged
process as long as it has BPF token allowing BPF_BTF_LOAD command, which
can be created and delegated by privileged process.
Wire through new btf_flags as well, so that user can provide
BPF_F_TOKEN_FD flag, if necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-15-andrii@kernel.org
Add basic support of BPF token to BPF_PROG_LOAD. BPF_F_TOKEN_FD flag
should be set in prog_flags field when providing prog_token_fd.
Wire through a set of allowed BPF program types and attach types,
derived from BPF FS at BPF token creation time. Then make sure we
perform bpf_token_capable() checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-7-andrii@kernel.org
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BPF_F_TOKEN_FD flag has to be specified
when passing BPF token FD. Given BPF_BTF_LOAD command didn't have flags
field before, we also add btf_flags field.
BTF loading is a pretty straightforward operation, so as long as BPF
token is created with allow_cmds granting BPF_BTF_LOAD command, kernel
proceeds to parsing BTF data and creating BTF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-6-andrii@kernel.org
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
New BPF_F_TOKEN_FD flag is added to specify together with BPF token FD
for BPF_MAP_CREATE command.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-5-andrii@kernel.org
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token. Also creating BPF token in init user namespace is
currently not supported, given BPF token doesn't have any effect in init
user namespace anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-4-andrii@kernel.org
The commit 9e926acda0c2 ("libbpf: Find correct module BTFs for struct_ops maps and progs.")
sets a newly added field (value_type_btf_obj_fd) to -1 in libbpf when
the caller of the libbpf's bpf_map_create did not define this field by
passing a NULL "opts" or passing in a "opts" that does not cover this
new field. OPT_HAS(opts, field) is used to decide if the field is
defined or not:
((opts) && opts->sz >= offsetofend(typeof(*(opts)), field))
Once OPTS_HAS decided the field is not defined, that field should
be set to 0. For this particular new field (value_type_btf_obj_fd),
its corresponding map_flags "BPF_F_VTYPE_BTF_OBJ_FD" is not set.
Thus, the kernel does not treat it as an fd field.
Fixes: 9e926acda0c2 ("libbpf: Find correct module BTFs for struct_ops maps and progs.")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240124224418.2905133-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Locate the module BTFs for struct_ops maps and progs and pass them to the
kernel. This ensures that the kernel correctly resolves type IDs from the
appropriate module BTFs.
For the map of a struct_ops object, the FD of the module BTF is set to
bpf_map to keep a reference to the module BTF. The FD is passed to the
kernel as value_type_btf_obj_fd when the struct_ops object is loaded.
For a bpf_struct_ops prog, attach_btf_obj_fd of bpf_prog is the FD of a
module BTF in the kernel.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240119225005.668602-13-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pass the fd of a btf from the userspace to the bpf() syscall, and then
convert the fd into a btf. The btf is generated from the module that
defines the target BPF struct_ops type.
In order to inform the kernel about the module that defines the target
struct_ops type, the userspace program needs to provide a btf fd for the
respective module's btf. This btf contains essential information on the
types defined within the module, including the target struct_ops type.
A btf fd must be provided to the kernel for struct_ops maps and for the bpf
programs attached to those maps.
In the case of the bpf programs, the attach_btf_obj_fd parameter is passed
as part of the bpf_attr and is converted into a btf. This btf is then
stored in the prog->aux->attach_btf field. Here, it just let the verifier
access attach_btf directly.
In the case of struct_ops maps, a btf fd is passed as value_type_btf_obj_fd
of bpf_attr. The bpf_struct_ops_map_alloc() function converts the fd to a
btf and stores it as st_map->btf. A flag BPF_F_VTYPE_BTF_OBJ_FD is added
for map_flags to indicate that the value of value_type_btf_obj_fd is set.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-9-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Include btf object id (btf_obj_id) in bpf_map_info so that tools (ex:
bpftools struct_ops dump) know the correct btf from the kernel to look up
type information of struct_ops types.
Since struct_ops types can be defined and registered in a module. The
type information of a struct_ops type are defined in the btf of the
module defining it. The userspace tools need to know which btf is for
the module defining a struct_ops type.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-7-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
At the moment we don't store cookie for perf_event probes,
while we do that for the rest of the probes.
Adding cookie fields to struct bpf_link_info perf event
probe records:
perf_event.uprobe
perf_event.kprobe
perf_event.tracepoint
perf_event.perf_event
And the code to store that in bpf_link_info struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20240119110505.400573-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We've ran into issues with using dup2() API in production setting, where
libbpf is linked into large production environment and ends up calling
unintended custom implementations of dup2(). These custom implementations
don't provide atomic FD replacement guarantees of dup2() syscall,
leading to subtle and hard to debug issues.
To prevent this in the future and guarantee that no libc implementation
will do their own custom non-atomic dup2() implementation, call dup2()
syscall directly with syscall(SYS_dup2).
Note that some architectures don't seem to provide dup2 and have dup3
instead. Try to detect and pick best syscall.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240119210201.1295511-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch allows to auto create BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS with values of BPF_MAP_TYPE_PERF_EVENT_ARRAY
by bpf_object__load().
Previous behaviour created a zero filled btf_map_def for inner maps and
tried to use it for a map creation but the linux kernel forbids to create
a BPF_MAP_TYPE_PERF_EVENT_ARRAY map with max_entries=0.
Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-1-conquistador@yandex-team.ru
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On kernel that don't support arg:ctx tag, before adjusting global
subprog BTF information to match kernel's expected canonical type names,
make sure that types used by user are meaningful, and if not, warn and
don't do BTF adjustments.
This is similar to checks that kernel performs, but narrower in scope,
as only a small subset of BPF program types can be accommodated by
libbpf using canonical type names.
Libbpf unconditionally allows `struct pt_regs *` for perf_event program
types, unlike kernel, which supports that conditionally on architecture.
This is done to keep things simple and not cause unnecessary false
positives. This seems like a minor and harmless deviation, which in
real-world programs will be caught by kernels with arg:ctx tag support
anyways. So KISS principle.
This logic is hard to test (especially on latest kernels), so manual
testing was performed instead. Libbpf emitted the following warning for
perf_event program with wrong context argument type:
libbpf: prog 'arg_tag_ctx_perf': subprog 'subprog_ctx_tag' arg#0 is expected to be of `struct bpf_perf_event_data *` type
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add feature detector of kernel-side arg:ctx (__arg_ctx) tag support. If
this is detected, libbpf will avoid doing any __arg_ctx-related BTF
rewriting and checks in favor of letting kernel handle this completely.
test_global_funcs/ctx_arg_rewrite subtest is adjusted to do the same
feature detection (albeit in much simpler, though round-about and
inefficient, way), and skip the tests. This is done to still be able to
execute this test on older kernels (like in libbpf CI).
Note, BPF token series ([0]) does a major refactor and code moving of
libbpf-internal feature detection "framework", so to avoid unnecessary
conflicts we keep newly added feature detection stand-alone with ad-hoc
result caching. Once things settle, there will be a small follow up to
re-integrate everything back and move code into its final place in
newly-added (by BPF token series) features.c file.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=814209&state=*
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The branch counters logging (A.K.A LBR event logging) introduces a
per-counter indication of precise event occurrences in LBRs. It can
provide a means to attribute exposed retirement latency to combinations
of events across a block of instructions. It also provides a means of
attributing Timed LBR latencies to events.
The feature is first introduced on SRF/GRR. It is an enhancement of the
ARCH LBR. It adds new fields in the LBR_INFO MSRs to log the occurrences
of events on the GP counters. The information is displayed by the order
of counters.
The design proposed in this patch requires that the events which are
logged must be in a group with the event that has LBR. If there are
more than one LBR group, the counters logging information only from the
current group (overflowed) are stored for the perf tool, otherwise the
perf tool cannot know which and when other groups are scheduled
especially when multiplexing is triggered. The user can ensure it uses
the maximum number of counters that support LBR info (4 by now) by
making the group large enough.
The HW only logs events by the order of counters. The order may be
different from the order of enabling which the perf tool can understand.
When parsing the information of each branch entry, convert the counter
order to the enabled order, and store the enabled order in the extension
space.
Unconditionally reset LBRs for an LBR event group when it's deleted. The
logged counter information is only valid for the current LBR group. If
another LBR group is scheduled later, the information from the stale
LBRs would be otherwise wrongly interpreted.
Add a sanity check in intel_pmu_hw_config(). Disable the feature if other
counter filters (inv, cmask, edge, in_tx) are set or LBR call stack mode
is enabled. (For the LBR call stack mode, we cannot simply flush the
LBR, since it will break the call stack. Also, there is no obvious usage
with the call stack mode for now.)
Only applying the PERF_SAMPLE_BRANCH_COUNTERS doesn't require any branch
stack setup.
Expose the maximum number of supported counters and the width of the
counters into the sysfs. The perf tool can use the information to parse
the logged counters in each branch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-5-kan.liang@linux.intel.com
Currently, the additional information of a branch entry is stored in a
u64 space. With more and more information added, the space is running
out. For example, the information of occurrences of events will be added
for each branch.
Two places were suggested to append the counters.
https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/
One place is right after the flags of each branch entry. It changes the
existing struct perf_branch_entry. The later ARCH specific
implementation has to be really careful to consistently pick
the right struct.
The other place is right after the entire struct perf_branch_stack.
The disadvantage is that the pointer of the extra space has to be
recorded. The common interface perf_sample_save_brstack() has to be
updated.
The latter is much straightforward, and should be easily understood and
maintained. It is implemented in the patch.
Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate
the event which is recorded in the branch info.
The "u64 counters" may store the occurrences of several events. The
information regarding the number of events/counters and the width of
each counter should be exposed via sysfs as a reference for the perf
tool. Define the branch_counter_nr and branch_counter_width ABI here.
The support will be implemented later in the Intel-specific patch.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com
Add lwt_reroute and tc_links_ingress to DENYLIST, as they are currently
broken due to kernel bug. Fix is underreview and should make it into
bpf-next soon.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Syncing latest libbpf commits from kernel repository.
Baseline bpf-next commit: 750011e239a50873251c16207b0fe78eabf8577e
Checkpoint bpf-next commit: 98e20e5e13d2811898921f999288be7151a11954
Baseline bpf commit: bc4fbf022c68967cb49b2b820b465cf90de974b8
Checkpoint bpf commit: 7c5e046bdcb2513f9decb3765d8bf92d604279cf
Alyssa Ross (1):
libbpf: Skip DWARF sections in linker sanity check
Amritha Nambiar (4):
netdev-genl: spec: Extend netdev netlink spec in YAML for queue
netdev-genl: spec: Extend netdev netlink spec in YAML for NAPI
netdev-genl: spec: Add irq in netdev netlink YAML spec
netdev-genl: spec: Add PID in netdev netlink YAML spec
Andrii Nakryiko (24):
bpf: introduce BPF token object
bpf: add BPF token support to BPF_MAP_CREATE command
bpf: add BPF token support to BPF_BTF_LOAD command
bpf: add BPF token support to BPF_PROG_LOAD command
libbpf: add bpf_token_create() API
libbpf: add BPF token support to bpf_map_create() API
libbpf: add BPF token support to bpf_btf_load() API
libbpf: add BPF token support to bpf_prog_load() API
bpf: rename MAX_BPF_LINK_TYPE into __MAX_BPF_LINK_TYPE for consistency
libbpf: split feature detectors definitions from cached results
libbpf: further decouple feature checking logic from bpf_object
libbpf: move feature detection code into its own file
libbpf: wire up token_fd into feature probing logic
libbpf: wire up BPF token support at BPF object level
libbpf: support BPF token path setting through LIBBPF_BPF_TOKEN_PATH
envvar
Revert BPF token-related functionality
libbpf: add __arg_xxx macros for annotating global func args
libbpf: make uniform use of btf__fd() accessor inside libbpf
libbpf: use explicit map reuse flag to skip map creation steps
libbpf: don't rely on map->fd as an indicator of map being created
libbpf: use stable map placeholder FDs
libbpf: move exception callbacks assignment logic into relocation step
libbpf: move BTF loading step after relocation step
libbpf: implement __arg_ctx fallback logic
Daniel Xu (1):
libbpf: Add BPF_CORE_WRITE_BITFIELD() macro
David Vernet (1):
bpf: Load vmlinux btf for any struct_ops map
Eduard Zingerman (1):
libbpf: Start v1.4 development cycle
Jakub Kicinski (1):
tools: ynl: add sample for getting page-pool information
Jamal Hadi Salim (5):
net/sched: Remove uapi support for rsvp classifier
net/sched: Remove uapi support for tcindex classifier
net/sched: Remove uapi support for dsmark qdisc
net/sched: Remove uapi support for ATM qdisc
net/sched: Remove uapi support for CBQ qdisc
Jiri Olsa (2):
libbpf: Add st_type argument to elf_resolve_syms_offsets function
bpf: Add link_info support for uprobe multi link
Larysa Zaremba (1):
xdp: Add VLAN tag hint
Mingyi Zhang (1):
libbpf: Fix NULL pointer dereference in bpf_object__collect_prog_relos
Sergei Trofimovich (1):
libbpf: Add pr_warn() for EINVAL cases in linker_sanity_check_elf
Stanislav Fomichev (3):
xsk: Support tx_metadata_len
xsk: Add TX timestamp and TX checksum offload support
xsk: Add option to calculate TX checksum in SW
include/uapi/linux/bpf.h | 14 +-
include/uapi/linux/if_xdp.h | 61 +++-
include/uapi/linux/netdev.h | 81 ++++-
include/uapi/linux/pkt_cls.h | 47 ---
include/uapi/linux/pkt_sched.h | 109 ------
src/bpf_core_read.h | 32 ++
src/bpf_helpers.h | 3 +
src/elf.c | 5 +-
src/libbpf.c | 585 +++++++++++++++++++++++++--------
src/libbpf.map | 3 +
src/libbpf_internal.h | 17 +-
src/libbpf_version.h | 2 +-
src/linker.c | 27 +-
13 files changed, 673 insertions(+), 313 deletions(-)
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Out of all special global func arg tag annotations, __arg_ctx is
practically is the most immediately useful and most critical to have
working across multitude kernel version, if possible. This would allow
end users to write much simpler code if __arg_ctx semantics worked for
older kernels that don't natively understand btf_decl_tag("arg:ctx") in
verifier logic.
Luckily, it is possible to ensure __arg_ctx works on old kernels through
a bit of extra work done by libbpf, at least in a lot of common cases.
To explain the overall idea, we need to go back at how context argument
was supported in global funcs before __arg_ctx support was added. This
was done based on special struct name checks in kernel. E.g., for
BPF_PROG_TYPE_PERF_EVENT the expectation is that argument type `struct
bpf_perf_event_data *` mark that argument as PTR_TO_CTX. This is all
good as long as global function is used from the same BPF program types
only, which is often not the case. If the same subprog has to be called
from, say, kprobe and perf_event program types, there is no single
definition that would satisfy BPF verifier. Subprog will have context
argument either for kprobe (if using bpf_user_pt_regs_t struct name) or
perf_event (with bpf_perf_event_data struct name), but not both.
This limitation was the reason to add btf_decl_tag("arg:ctx"), making
the actual argument type not important, so that user can just define
"generic" signature:
__noinline int global_subprog(void *ctx __arg_ctx) { ... }
I won't belabor how libbpf is implementing subprograms, see a huge
comment next to bpf_object_relocate_calls() function. The idea is that
each main/entry BPF program gets its own copy of global_subprog's code
appended.
This per-program copy of global subprog code *and* associated func_info
.BTF.ext information, pointing to FUNC -> FUNC_PROTO BTF type chain
allows libbpf to simulate __arg_ctx behavior transparently, even if the
kernel doesn't yet support __arg_ctx annotation natively.
The idea is straightforward: each time we append global subprog's code
and func_info information, we adjust its FUNC -> FUNC_PROTO type
information, if necessary (that is, libbpf can detect the presence of
btf_decl_tag("arg:ctx") just like BPF verifier would do it).
The rest is just mechanical and somewhat painful BTF manipulation code.
It's painful because we need to clone FUNC -> FUNC_PROTO, instead of
reusing it, as same FUNC -> FUNC_PROTO chain might be used by another
main BPF program within the same BPF object, so we can't just modify it
in-place (and cloning BTF types within the same struct btf object is
painful due to constant memory invalidation, see comments in code).
Uploaded BPF object's BTF information has to work for all BPF
programs at the same time.
Once we have FUNC -> FUNC_PROTO clones, we make sure that instead of
using some `void *ctx` parameter definition, we have an expected `struct
bpf_perf_event_data *ctx` definition (as far as BPF verifier and kernel
is concerned), which will mark it as context for BPF verifier. Same
global subprog relocated and copied into another main BPF program will
get different type information according to main program's type. It all
works out in the end in a completely transparent way for end user.
Libbpf maintains internal program type -> expected context struct name
mapping internally. Note, not all BPF program types have named context
struct, so this approach won't work for such programs (just like it
didn't before __arg_ctx). So native __arg_ctx is still important to have
in kernel to have generic context support across all BPF program types.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the logic of finding and assigning exception callback indices from
BTF sanitization step to program relocations step, which seems more
logical and will unblock moving BTF loading to after relocation step.
Exception callbacks discovery and assignment has no dependency on BTF
being loaded into the kernel, it only uses BTF information. It does need
to happen before subprogram relocations happen, though. Which is why the
split.
No functional changes.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move map creation to later during BPF object loading by pre-creating
stable placeholder FDs (utilizing memfd_create()). Use dup2()
syscall to then atomically make those placeholder FDs point to real
kernel BPF map objects.
This change allows to delay BPF map creation to after all the BPF
program relocations. That, in turn, allows to delay BTF finalization and
loading into kernel to after all the relocations as well. We'll take
advantage of the latter in subsequent patches to allow libbpf to adjust
BTF in a way that helps with BPF global function usage.
Clean up a few places where we close map->fd, which now shouldn't
happen, because map->fd should be a valid FD regardless of whether map
was created or not. Surprisingly and nicely it simplifies a bunch of
error handling code. If this change doesn't backfire, I'm tempted to
pre-create such stable FDs for other entities (progs, maybe even BTF).
We previously did some manipulations to make gen_loader work with fake
map FDs, with stable map FDs this hack is not necessary for maps (we
still have it for BTF, but I left it as is for now).
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the upcoming switch to preallocated placeholder FDs for maps,
switch various getters/setter away from checking map->fd. Use
map_is_created() helper that detect whether BPF map can be modified based
on map->obj->loaded state, with special provision for maps set up with
bpf_map__reuse_fd().
For backwards compatibility, we take map_is_created() into account in
bpf_map__fd() getter as well. This way before bpf_object__load() phase
bpf_map__fd() will always return -1, just as before the changes in
subsequent patches adding stable map->fd placeholders.
We also get rid of all internal uses of bpf_map__fd() getter, as it's
more oriented for uses external to libbpf. The above map_is_created()
check actually interferes with some of the internal uses, if map FD is
fetched through bpf_map__fd().
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 051d44209842 ("net/sched: Retire CBQ qdisc") retired the CBQ qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fb38306ceb9e ("net/sched: Retire ATM qdisc") retired the ATM qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bbe77c14ee61 ("net/sched: Retire dsmark qdisc") retired the dsmark
classifier. Remove UAPI support for it.
Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 8c710f75256b ("net/sched: Retire tcindex classifier") retired the TC
tcindex classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 265b4da82dbf ("net/sched: Retire rsvp classifier") retired the TC RSVP
classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An issue occurred while reading an ELF file in libbpf.c during fuzzing:
Program received signal SIGSEGV, Segmentation fault.
0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
4206 in libbpf.c
(gdb) bt
#0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706
#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437
#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497
#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16
#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one ()
#6 0x000000000087ad92 in tracing::span::Span::in_scope ()
#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir ()
#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} ()
#9 0x00000000005f2601 in main ()
(gdb)
scn_data was null at this code(tools/lib/bpf/src/libbpf.c):
if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) {
The scn_data is derived from the code above:
scn = elf_sec_by_idx(obj, sec_idx);
scn_data = elf_sec_data(obj, scn);
relo_sec_name = elf_sec_str(obj, shdr->sh_name);
sec_name = elf_sec_name(obj, scn);
if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL
return -EINVAL;
In certain special scenarios, such as reading a malformed ELF file,
it is possible that scn_data may be a null pointer
Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com>
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Changye Wu <wuchangye@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com
To allow external admin authority to override default BPF FS location
(/sys/fs/bpf) for implicit BPF token creation, teach libbpf to recognize
LIBBPF_BPF_TOKEN_PATH envvar. If it is specified and user application
didn't explicitly specify neither bpf_token_path nor bpf_token_fd
option, it will be treated exactly like bpf_token_path option,
overriding default /sys/fs/bpf location and making BPF token mandatory.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add BPF token support to BPF object-level functionality.
BPF token is supported by BPF object logic either as an explicitly
provided BPF token from outside (through BPF FS path or explicit BPF
token FD), or implicitly (unless prevented through
bpf_object_open_opts).
Implicit mode is assumed to be the most common one for user namespaced
unprivileged workloads. The assumption is that privileged container
manager sets up default BPF FS mount point at /sys/fs/bpf with BPF token
delegation options (delegate_{cmds,maps,progs,attachs} mount options).
BPF object during loading will attempt to create BPF token from
/sys/fs/bpf location, and pass it for all relevant operations
(currently, map creation, BTF load, and program load).
In this implicit mode, if BPF token creation fails due to whatever
reason (BPF FS is not mounted, or kernel doesn't support BPF token,
etc), this is not considered an error. BPF object loading sequence will
proceed with no BPF token.
In explicit BPF token mode, user provides explicitly either custom BPF
FS mount point path or creates BPF token on their own and just passes
token FD directly. In such case, BPF object will either dup() token FD
(to not require caller to hold onto it for entire duration of BPF object
lifetime) or will attempt to create BPF token from provided BPF FS
location. If BPF token creation fails, that is considered a critical
error and BPF object load fails with an error.
Libbpf provides a way to disable implicit BPF token creation, if it
causes any troubles (BPF token is designed to be completely optional and
shouldn't cause any problems even if provided, but in the world of BPF
LSM, custom security logic can be installed that might change outcome
dependin on the presence of BPF token). To disable libbpf's default BPF
token creation behavior user should provide either invalid BPF token FD
(negative), or empty bpf_token_path option.
BPF token presence can influence libbpf's feature probing, so if BPF
object has associated BPF token, feature probing is instructed to use
BPF object-specific feature detection cache and token FD.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust feature probing callbacks to take into account optional token_fd.
In unprivileged contexts, some feature detectors would fail to detect
kernel support just because BPF program, BPF map, or BTF object can't be
loaded due to privileged nature of those operations. So when BPF object
is loaded with BPF token, this token should be used for feature probing.
This patch is setting support for this scenario, but we don't yet pass
non-zero token FD. This will be added in the next patch.
We also switched BPF cookie detector from using kprobe program to
tracepoint one, as tracepoint is somewhat less dangerous BPF program
type and has higher likelihood of being allowed through BPF token in the
future. This change has no effect on detection behavior.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add feat_supported() helper that accepts feature cache instead of
bpf_object. This allows low-level code in bpf.c to not know or care
about higher-level concept of bpf_object, yet it will be able to utilize
custom feature checking in cases where BPF token might influence the
outcome.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
=== Motivation ===
Similar to reading from CO-RE bitfields, we need a CO-RE aware bitfield
writing wrapper to make the verifier happy.
Two alternatives to this approach are:
1. Use the upcoming `preserve_static_offset` [0] attribute to disable
CO-RE on specific structs.
2. Use broader byte-sized writes to write to bitfields.
(1) is a bit hard to use. It requires specific and not-very-obvious
annotations to bpftool generated vmlinux.h. It's also not generally
available in released LLVM versions yet.
(2) makes the code quite hard to read and write. And especially if
BPF_CORE_READ_BITFIELD() is already being used, it makes more sense to
to have an inverse helper for writing.
=== Implementation details ===
Since the logic is a bit non-obvious, I thought it would be helpful
to explain exactly what's going on.
To start, it helps by explaining what LSHIFT_U64 (lshift) and RSHIFT_U64
(rshift) is designed to mean. Consider the core of the
BPF_CORE_READ_BITFIELD() algorithm:
val <<= __CORE_RELO(s, field, LSHIFT_U64);
val = val >> __CORE_RELO(s, field, RSHIFT_U64);
Basically what happens is we lshift to clear the non-relevant (blank)
higher order bits. Then we rshift to bring the relevant bits (bitfield)
down to LSB position (while also clearing blank lower order bits). To
illustrate:
Start: ........XXX......
Lshift: XXX......00000000
Rshift: 00000000000000XXX
where `.` means blank bit, `0` means 0 bit, and `X` means bitfield bit.
After the two operations, the bitfield is ready to be interpreted as a
regular integer.
Next, we want to build an alternative (but more helpful) mental model
on lshift and rshift. That is, to consider:
* rshift as the total number of blank bits in the u64
* lshift as number of blank bits left of the bitfield in the u64
Take a moment to consider why that is true by consulting the above
diagram.
With this insight, we can now define the following relationship:
bitfield
_
| |
0.....00XXX0...00
| | | |
|______| | |
lshift | |
|____|
(rshift - lshift)
That is, we know the number of higher order blank bits is just lshift.
And the number of lower order blank bits is (rshift - lshift).
Finally, we can examine the core of the write side algorithm:
mask = (~0ULL << rshift) >> lshift; // 1
val = (val & ~mask) | ((nval << rpad) & mask); // 2
1. Compute a mask where the set bits are the bitfield bits. The first
left shift zeros out exactly the number of blank bits, leaving a
bitfield sized set of 1s. The subsequent right shift inserts the
correct amount of higher order blank bits.
2. On the left of the `|`, mask out the bitfield bits. This creates
0s where the new bitfield bits will go. On the right of the `|`,
bring nval into the correct bit position and mask out any bits
that fall outside of the bitfield. Finally, by bor'ing the two
halves, we get the final set of bits to write back.
[0]: https://reviews.llvm.org/D133361
Co-developed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Jonathan Lemon <jlemon@aviatrix.com>
Signed-off-by: Jonathan Lemon <jlemon@aviatrix.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/4d3dd215a4fd57d980733886f9c11a45e1a9adf3.1702325874.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Before the change on `i686-linux` `systemd` build failed as:
$ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22)
After the change it fails as:
$ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
libbpf: ELF section #9 has inconsistent alignment addr=8 != d=4 in src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22)
Now it's slightly easier to figure out what is wrong with an ELF file.
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231208215100.435876-1-slyich@gmail.com
In libbpf, when determining whether we need to load vmlinux btf, we're
currently (among other things) checking whether there is any struct_ops
program present in the object. This works for most realistic struct_ops
maps, as a struct_ops map is of course typically composed of one or more
struct_ops programs. However, that technically need not be the case. A
struct_ops interface could be defined which allows a map to be specified
which one or more non-prog fields, and which provides default behavior
if no struct_ops progs is actually provided otherwise. For sched_ext,
for example, you technically only need to specify the name of the
scheduler in the struct_ops map, with the core scheduler logic providing
default behavior if no prog is actually specified.
If we were to define and try to load such a struct_ops map, we would
crash in libbpf when initializing it as obj->btf_vmlinux will be NULL:
Reading symbols from minimal...
(gdb) r
Starting program: minimal_example
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x000055555558308c in btf__type_cnt (btf=0x0) at btf.c:612
612 return btf->start_id + btf->nr_types;
(gdb) bt
type_name=0x5555555d99e3 "sched_ext_ops", kind=4) at btf.c:914
kind=4) at btf.c:942
type=0x7fffffffe558, type_id=0x7fffffffe548, ...
data_member=0x7fffffffe568) at libbpf.c:948
kern_btf=0x0) at libbpf.c:1017
at libbpf.c:8059
So as to account for such bare-bones struct_ops maps, let's update
obj_needs_vmlinux_btf() to also iterate over an obj's maps and check
whether any of them are struct_ops maps.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231208061704.400463-1-void@manifault.com
To stay consistent with the naming pattern used for similar cases in BPF
UAPI (__MAX_BPF_ATTACH_TYPE, etc), rename MAX_BPF_LINK_TYPE into
__MAX_BPF_LINK_TYPE.
Also similar to MAX_BPF_ATTACH_TYPE and MAX_BPF_REG, add:
#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
Not all __MAX_xxx enums have such #define, so I'm not sure if we should
add it or not, but I figured I'll start with a completely backwards
compatible way, and we can drop that, if necessary.
Also adjust a selftest that used MAX_BPF_LINK_TYPE enum.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231206190920.1651226-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow user to specify token_fd for bpf_btf_load() API that wraps
kernel's BPF_BTF_LOAD command. This allows loading BTF from unprivileged
process as long as it has BPF token allowing BPF_BTF_LOAD command, which
can be created and delegated by privileged process.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-15-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add basic support of BPF token to BPF_PROG_LOAD. Wire through a set of
allowed BPF program types and attach types, derived from BPF FS at BPF
token creation time. Then make sure we perform bpf_token_capable()
checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BTF loading is a pretty straightforward
operation, so as long as BPF token is created with allow_cmds granting
BPF_BTF_LOAD command, kernel proceeds to parsing BTF data and creating
BTF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change actually defines the (initial) metadata layout
that should be used by AF_XDP userspace (xsk_tx_metadata).
The first field is flags which requests appropriate offloads,
followed by the offload-specific fields. The supported per-device
offloads are exported via netlink (new xsk-flags).
The offloads themselves are still implemented in a bit of a
framework-y fashion that's left from my initial kfunc attempt.
I'm introducing new xsk_tx_metadata_ops which drivers are
supposed to implement. The drivers are also supposed
to call xsk_tx_metadata_request/xsk_tx_metadata_complete in
the right places. Since xsk_tx_metadata_{request,_complete}
are static inline, we don't incur any extra overhead doing
indirect calls.
The benefit of this scheme is as follows:
- keeps all metadata layout parsing away from driver code
- makes it easy to grep and see which drivers implement what
- don't need any extra flags to maintain to keep track of what
offloads are implemented; if the callback is implemented - the offload
is supported (used by netlink reporting code)
Two offloads are defined right now:
1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset
2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata
area upon completion (tx_timestamp field)
XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes
SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass
metadata pointer).
The struct is forward-compatible and can be extended in the future
by appending more fields.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For zerocopy mode, tx_desc->addr can point to an arbitrary offset
and carry some TX metadata in the headroom. For copy mode, there
is no way currently to populate skb metadata.
Introduce new tx_metadata_len umem config option that indicates how many
bytes to treat as metadata. Metadata bytes come prior to tx_desc address
(same as in RX case).
The size of the metadata has mostly the same constraints as XDP:
- less than 256 bytes
- 8-byte aligned (compared to 4-byte alignment on xdp, due to 8-byte
timestamp in the completion)
- non-zero
This data is not interpreted in any way right now.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-2-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to get uprobe_link details through bpf_link_info
interface.
Adding new struct uprobe_multi to struct bpf_link_info to carry
the uprobe_multi link details.
The uprobe_multi.count is passed from user space to denote size
of array fields (offsets/ref_ctr_offsets/cookies). The actual
array size is stored back to uprobe_multi.count (allowing user
to find out the actual array size) and array fields are populated
up to the user passed size.
All the non-array fields (path/count/flags/pid) are always set.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231125193130.834322-4-jolsa@kernel.org
The vmtest action is used by several workflows: test, pahole, ondemand.
At the same time, vmtest action requires valid access rights to /dev/kvm
and is the only action that uses it.
This commit moves /dev/kvm permissions setup from test workflow to
vmtest action, in order to make sure that setup logic is shared by all
workflows that run vmtest.
Should fix CI failures like [1].
[1] https://github.com/libbpf/libbpf/actions/runs/7104762048/job/19340484589
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Without needing to modify tons of BPF selftests file, make sure we don't
pass BPF_F_TEST_REG_INVARIANTS to kernel, to make BPF selftests work on
4.9 and 5.5 kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add simple sanity checks that validate well-formed ranges (min <= max)
across u64, s64, u32, and s32 ranges. Also for cases when the value is
constant (either 64-bit or 32-bit), we validate that ranges and tnums
are in agreement.
These bounds checks are performed at the end of BPF_ALU/BPF_ALU64
operations, on conditional jumps, and for LDX instructions (where subreg
zero/sign extension is probably the most important to check). This
covers most of the interesting cases.
Also, we validate the sanity of the return register when manually
adjusting it for some special helpers.
By default, sanity violation will trigger a warning in verifier log and
resetting register bounds to "unbounded" ones. But to aid development
and debugging, BPF_F_TEST_SANITY_STRICT flag is added, which will
trigger hard failure of verification with -EFAULT on register bounds
violations. This allows selftests to catch such issues. veristat will
also gain a CLI option to enable this behavior.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231112010609.848406-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently get_perf_callchain only supports user stack walking for
the current task. Passing the correct *crosstask* param will return
0 frames if the task passed to __bpf_get_stack isn't the current
one instead of a single incorrect frame/address. This change
passes the correct *crosstask* param but also does a preemptive
check in __bpf_get_stack if the task is current and returns
-EOPNOTSUPP if it is not.
This issue was found using bpf_get_task_stack inside a BPF
iterator ("iter/task"), which iterates over all tasks.
bpf_get_task_stack works fine for fetching kernel stacks
but because get_perf_callchain relies on the caller to know
if the requested *task* is the current one (via *crosstask*)
it was failing in a confusing way.
It might be possible to get user stacks for all tasks utilizing
something like access_process_vm but that requires the bpf
program calling bpf_get_task_stack to be sleepable and would
therefore be a breaking change.
Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Jordan Rome <jordalgo@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com
The following 'sockopt' selftests fail on libbpf CI for kernel 5.5:
- sockopt/getsockopt: read ctx->optlen:FAIL
- sockopt/getsockopt: support smaller ctx->optlen:FAIL
- sockopt/setsockopt: read ctx->level:FAIL
- sockopt/setsockopt: read ctx->optname:FAIL
- sockopt/setsockopt: read ctx->optlen:FAIL
- sockopt/setsockopt: ctx->optlen == -1 is ok:FAIL
Examples of failing CI runs:
- https://github.com/libbpf/libbpf/actions/runs/6961182067
- https://github.com/libbpf/libbpf/actions/runs/6961088131
The failures are strange as all tests were added quite a while ago
(Jun 27 2019) by commit:
9ec8a4c9489d ("selftests/bpf: add sockopt test")
But seem to be unrelated to libbpf.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
All tests disabled in this commit pass on main kernel CI and fail or
flip/flop on libbpf CI. Failures do not seem to be related to libbpf.
It appears that common theme for all failing tests is that hardware
perf events are not delivered as expected on github CI worker
machines.
Examples of failed CI runs:
- https://github.com/libbpf/libbpf/actions/runs/6961182067
- https://github.com/libbpf/libbpf/actions/runs/6961088131
Fails with the following log:
test_send_signal_common:FAIL:incorrect result \
unexpected incorrect result: actual 48 != expected 50
Test mode of operation:
- fork'
- child:
- install handler for SIGUSR1;
- send ready message to parent;
- wait for SIGUSR1 in busy loop;
- send message '2' (50) to parent if SIGUSR1 occured;
- send message '0' (48) to parent if no SIGUSR1 occured.
- parent:
- wait for ready message from child;
- install perf_event or tracepoint bpf program that uses
bpf_send_signal() to send SIGUSR1;
- wait for message '0' or '2' from child, '2' is expected for test
success.
It appears that perf event that should be triggered by parent never
happens, thus message 48 is received by parent and test fails.
Fails with the following log:
test_and_reset_skel:FAIL:found_vm_exec \
unexpected found_vm_exec: actual 0 != expected 1
Such log is printed if variables set from BPF program are not set
after some timeout. The program that should set the variable is
SEC("perf_event") int handle_pe(void), it appears that it is never run.
Fails with the following log:
pe_subtest:FAIL:pe_res1 unexpected pe_res1: actual 0 != expected 1048576
Variable pe_res1 should be triggered by program
SEC("perf_event") int handle_pe(struct pt_regs *ctx),
it appears that it is never run.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
s390 tests are executed on selfhosted runner using root user,
avoid setting /dev/kvm permissions in such case.
This should fix CI failures like [0].
(Still necessary for x86 tests executed on standard github runners).
[0] https://github.com/libbpf/libbpf/actions/runs/6898545987/job/18768732980?pr=752
Fixes: 168630f852 ("ci: give /dev/kvm 0666 permissions inside CI runner")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Recent kernel commit [0] changed selftests config snippets structure
by extracting VM specific options to the file 'config.vm'. This file
has to be used in .github/actions/vmtest/action.yml at step
'Prepare to build BPF selftests', otherwise drivers necessary for e.g.
root file system access are not compiled into the kernel, leading to
CI failures like [1].
[0] b0cf0dcde8ca ("selftests/bpf: Consolidate VIRTIO/9P configs in config.vm file")
[1] https://github.com/libbpf/libbpf/actions/runs/6830439839/job/18578379328?pr=747
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Apply fe69a1b1b6ed ("selftests: bpf: xskxceiver: ksft_print_msg: fix
format type error") to make bpf-next build.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Starting recently libbpf CI runs started failing with the following
error:
##[group]vm_init - Starting virtual machine...
Starting VM with 4 CPUs...
INFO: /dev/kvm exists
KVM acceleration can be used
Could not access KVM kernel module: Permission denied
qemu-system-x86_64: failed to initialize KVM: Permission denied
##[error]Process completed with exit code 2.
E.g. see here [0]. The error happens because CI user has not enough
rights to access /dev/kvm. On a regular machine the solution would be
to add user to group 'kvm', however that would require a re-login,
which is cumbersome to achieve in CI setting.
Instead, use a recipe described in [1] to make udev set 0666 access
permissions for /dev/kvm.
[0] https://github.com/libbpf/libbpf/actions/runs/6819530119/job/18547589967?pr=746
[1] https://stackoverflow.com/questions/37300811/android-studio-dev-kvm-device-permission-denied/61984745#61984745
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Martin and Vadim reported a verifier failure with bpf_dynptr usage.
The issue is mentioned but Vadim workarounded the issue with source
change ([1]). The below describes what is the issue and why there
is a verification failure.
int BPF_PROG(skb_crypto_setup) {
struct bpf_dynptr algo, key;
...
bpf_dynptr_from_mem(..., ..., 0, &algo);
...
}
The bpf program is using vmlinux.h, so we have the following definition in
vmlinux.h:
struct bpf_dynptr {
long: 64;
long: 64;
};
Note that in uapi header bpf.h, we have
struct bpf_dynptr {
long: 64;
long: 64;
} __attribute__((aligned(8)));
So we lost alignment information for struct bpf_dynptr by using vmlinux.h.
Let us take a look at a simple program below:
$ cat align.c
typedef unsigned long long __u64;
struct bpf_dynptr_no_align {
__u64 :64;
__u64 :64;
};
struct bpf_dynptr_yes_align {
__u64 :64;
__u64 :64;
} __attribute__((aligned(8)));
void bar(void *, void *);
int foo() {
struct bpf_dynptr_no_align a;
struct bpf_dynptr_yes_align b;
bar(&a, &b);
return 0;
}
$ clang --target=bpf -O2 -S -emit-llvm align.c
Look at the generated IR file align.ll:
...
%a = alloca %struct.bpf_dynptr_no_align, align 1
%b = alloca %struct.bpf_dynptr_yes_align, align 8
...
The compiler dictates the alignment for struct bpf_dynptr_no_align is 1 and
the alignment for struct bpf_dynptr_yes_align is 8. So theoretically compiler
could allocate variable %a with alignment 1 although in reallity the compiler
may choose a different alignment by considering other local variables.
In [1], the verification failure happens because variable 'algo' is allocated
on the stack with alignment 4 (fp-28). But the verifer wants its alignment
to be 8.
To fix the issue, the RFC patch ([1]) tried to add '__attribute__((aligned(8)))'
to struct bpf_dynptr plus other similar structs. Andrii suggested that
we could directly modify uapi struct with named fields like struct 'bpf_iter_num':
struct bpf_iter_num {
/* opaque iterator state; having __u64 here allows to preserve correct
* alignment requirements in vmlinux.h, generated from BTF
*/
__u64 __opaque[1];
} __attribute__((aligned(8)));
Indeed, adding named fields for those affected structs in this patch can preserve
alignment when bpf program references them in vmlinux.h. With this patch,
the verification failure in [1] can also be resolved.
[1] https://lore.kernel.org/bpf/1b100f73-7625-4c1f-3ae5-50ecf84d3ff0@linux.dev/
[2] https://lore.kernel.org/bpf/20231103055218.2395034-1-yonghong.song@linux.dev/
Cc: Vadim Fedorenko <vadfed@meta.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231104024900.1539182-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds bpf_program__attach_netkit() API to libbpf. Overall it is very
similar to tcx. The API looks as following:
LIBBPF_API struct bpf_link *
bpf_program__attach_netkit(const struct bpf_program *prog, int ifindex,
const struct bpf_netkit_opts *opts);
The struct bpf_netkit_opts is done in similar way as struct bpf_tcx_opts
for supporting bpf_mprog control parameters. The attach location for the
primary and peer device is derived from the program section "netkit/primary"
and "netkit/peer", respectively.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.
One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).
In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.
Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f235d ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.
Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.
An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/20231024214904.29825-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Fix too eager assumption that SHT_GNU_verdef ELF section is going to be
present whenever binary has SHT_GNU_versym section. It seems like either
SHT_GNU_verdef or SHT_GNU_verneed can be used, so failing on missing
SHT_GNU_verdef actually breaks use cases in production.
One specific reported issue, which was used to manually test this fix,
was trying to attach to `readline` function in BASH binary.
Fixes: bb7fa09399b9 ("libbpf: Support symbol versioning for uprobe")
Reported-by: Liam Wisehart <liamwisehart@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Manu Bretelle <chantr4@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20231016182840.4033346-1-andrii@kernel.org
These hooks allows intercepting connect(), getsockname(),
getpeername(), sendmsg() and recvmsg() for unix sockets. The unix
socket hooks get write access to the address length because the
address length is not fixed when dealing with unix sockets and
needs to be modified when a unix socket address is modified by
the hook. Because abstract socket unix addresses start with a
NUL byte, we cannot recalculate the socket address in kernelspace
after running the hook by calculating the length of the unix socket
path using strlen().
These hooks can be used when users want to multiplex syscall to a
single unix socket to multiple different processes behind the scenes
by redirecting the connect() and other syscalls to process specific
sockets.
We do not implement support for intercepting bind() because when
using bind() with unix sockets with a pathname address, this creates
an inode in the filesystem which must be cleaned up. If we rewrite
the address, the user might try to clean up the wrong file, leaking
the socket in the filesystem where it is never cleaned up. Until we
figure out a solution for this (and a use case for intercepting bind()),
we opt to not allow rewriting the sockaddr in bind() calls.
We also implement recvmsg() support for connected streams so that
after a connect() that is modified by a sockaddr hook, any corresponding
recmvsg() on the connected socket can also be modified to make the
connected program think it is connected to the "intended" remote.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-5-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
BPF supports creating high resolution timers using bpf_timer_* helper
functions. Currently, only the BPF_F_TIMER_ABS flag is supported, which
specifies that the timeout should be interpreted as absolute time. It
would also be useful to be able to pin that timer to a core. For
example, if you wanted to make a subset of cores run without timer
interrupts, and only have the timer be invoked on a single core.
This patch adds support for this with a new BPF_F_TIMER_CPU_PIN flag.
When specified, the HRTIMER_MODE_PINNED flag is passed to
hrtimer_start(). A subsequent patch will update selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20231004162339.200702-2-void@manifault.com
The previous sync bpf-checkpoint-commit becomes invalid
due to upstream bpf tree force-push. This patch picked
a new valid commit as the bpf-checkpoint-commit so
the sync script can work with newer changes.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Without the change, we will have failures like below:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h' differs from latest version at 'include/uapi/linux/if_xdp.h'
progs/getsockname_unix_prog.c:27:15: error: no member named 'uaddrlen' in 'struct bpf_sock_addr_kern'
if (sa_kern->uaddrlen != unaddrlen)
~~~~~~~ ^
1 error generated.
make: *** [Makefile:605: /home/runner/work/libbpf/libbpf/.kernel/tools/testing/selftests/bpf/getsockname_unix_prog.bpf.o] Error 1
make: *** Waiting for unfinished jobs....
Error: Process completed with exit code 2.
in Kernel 5.5.0 on ubuntu-20.04 + selftests
Manu Bretelle kindly helped regenerate the vmlinux.h from latest
bpf-next kernel for me.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Golang symbols in ELF files are different from C/C++
which contains special characters like '*', '(' and ')'.
With generics, things get more complicated, there are
symbols like:
github.com/cilium/ebpf/internal.(*Deque[go.shape.interface { Format(fmt.State, int32); TypeName() string;github.com/cilium/ebpf/btf.copy() github.com/cilium/ebpf/btf.Type}]).Grow
Matching such symbols using `%m[^\n]` in sscanf, this
excludes newline which typically does not appear in ELF
symbols. This should work in most use-cases and also
work for unicode letters in identifiers. If newline do
show up in ELF symbols, users can still attach to such
symbol by specifying bpf_uprobe_opts::func_name.
A working example can be found at this repo ([0]).
[0]: https://github.com/chenhengqi/libbpf-go-symbols
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230929155954.92448-1-hengqi.chen@gmail.com
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
Switch rb->rings to be an array of pointers instead of a contiguous
block. This allows for each ring pointer to be stable after
ring_buffer__add is called, which allows us to expose struct ring * to
the user without gotchas. Without this change, the realloc in
ring_buffer__add could invalidate a struct ring *, making it unsafe to
give to the user.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-3-martin.kelly@crowdstrike.com
In current implementation, we assume that symbol found in .dynsym section
would have a version suffix and use it to compare with symbol user supplied.
According to the spec ([0]), this assumption is incorrect, the version info
of dynamic symbols are stored in .gnu.version and .gnu.version_d sections
of ELF objects. For example:
$ nm -D /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
000000000009b1a0 T __pthread_rwlock_wrlock@GLIBC_2.2.5
000000000009b1a0 T pthread_rwlock_wrlock@@GLIBC_2.34
000000000009b1a0 T pthread_rwlock_wrlock@GLIBC_2.2.5
$ readelf -W --dyn-syms /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
706: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 __pthread_rwlock_wrlock@GLIBC_2.2.5
2568: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@@GLIBC_2.34
2571: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@GLIBC_2.2.5
In this case, specify pthread_rwlock_wrlock@@GLIBC_2.34 or
pthread_rwlock_wrlock@GLIBC_2.2.5 in bpf_uprobe_opts::func_name won't work.
Because the qualified name does NOT match `pthread_rwlock_wrlock` (without
version suffix) in .dynsym sections.
This commit implements the symbol versioning for dynsym and allows user to
specify symbol in the following forms:
- func
- func@LIB_VERSION
- func@@LIB_VERSION
In case of symbol conflicts, error out and users should resolve it by
specifying a qualified name.
[0]: https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/symversion.html
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230918024813.237475-3-hengqi.chen@gmail.com
Dynamic symbols in shared library may have the same name, for example:
$ nm -D /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
000000000009b1a0 T __pthread_rwlock_wrlock@GLIBC_2.2.5
000000000009b1a0 T pthread_rwlock_wrlock@@GLIBC_2.34
000000000009b1a0 T pthread_rwlock_wrlock@GLIBC_2.2.5
$ readelf -W --dyn-syms /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
706: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 __pthread_rwlock_wrlock@GLIBC_2.2.5
2568: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@@GLIBC_2.34
2571: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@GLIBC_2.2.5
Currently, users can't attach a uprobe to pthread_rwlock_wrlock because
there are two symbols named pthread_rwlock_wrlock and both are global
bind. And libbpf considers it as a conflict.
Since both of them are at the same offset we could accept one of them
harmlessly. Note that we already does this in elf_resolve_syms_offsets.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230918024813.237475-2-hengqi.chen@gmail.com
Add support to libbpf to append exception callbacks when loading a
program. The exception callback is found by discovering the declaration
tag 'exception_callback:<value>' and finding the callback in the value
of the tag.
The process is done in two steps. First, for each main program, the
bpf_object__sanitize_and_load_btf function finds and marks its
corresponding exception callback as defined by the declaration tag on
it. Second, bpf_object__reloc_code is modified to append the indicated
exception callback at the end of the instruction iteration (since
exception callback will never be appended in that loop, as it is not
directly referenced).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-16-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Add new xdp-rx-metadata-features member to netdev netlink
which exports a bitmask of supported kfuncs. Most of the patch
is autogenerated (headers), the only relevant part is netdev.yaml
and the changes in netdev-genl.c to marshal into netlink.
Example output on veth:
$ ip link add veth0 type veth peer name veth1 # ifndex == 12
$ ./tools/net/ynl/samples/netdev 12
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 12
veth1[12] xdp-features (23): basic redirect rx-sg xdp-rx-metadata-features (3): timestamp hash xdp-zc-max-segs=0
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr'
can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality
and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated.
Also make changes in selftests/bpf/test_bpftool_synctypes.py
and selftest libbpf_str to fix otherwise test errors.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152837.2003563-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It doesn't work on 5.5 and was just recently introduced as a new subtest
to already existing test. Add subtest to denylist.
Also clean up old denylist, leaving only "exception" relative to
ALLOWLIST.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
GCC started complaining that some of libbpf pr_warn() statements might
be passing NULL for map name. Map name is never NULL for non-NULL map
pointer, so this is a false positive which triggers build failures.
Silence format-overflow warning altogether to avoid this in the future
as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
For bpf_object__pin_programs() there is bpf_object__unpin_programs().
Likewise bpf_object__unpin_maps() for bpf_object__pin_maps().
But no bpf_object__unpin() for bpf_object__pin(). Adding the former adds
symmetry to the API.
It's also convenient for cleanup in application code. It's an API I
would've used if it was available for a repro I was writing earlier.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/b2f9d41da4a350281a0b53a804d11b68327e14e5.1692832478.git.dxu@dxuuu.xyz
I hit a memory leak when testing bpf_program__set_attach_target().
Basically, set_attach_target() may allocate btf_vmlinux, for example,
when setting attach target for bpf_iter programs. But btf_vmlinux
is freed only in bpf_object_load(), which means if we only open
bpf object but not load it, setting attach target may leak
btf_vmlinux.
So let's free btf_vmlinux in bpf_object__close() anyway.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230822193840.1509809-1-haoluo@google.com
Adding support for usdt_manager_attach_usdt to use uprobe_multi
link to attach to usdt probes.
The uprobe_multi support is detected before the usdt program is
loaded and its expected_attach_type is set accordingly.
If uprobe_multi support is detected the usdt_manager_attach_usdt
gathers uprobes info and calls bpf_program__attach_uprobe to
create all needed uprobes.
If uprobe_multi support is not detected the old behaviour stays.
Also adding usdt.s program section for sleepable usdt probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-18-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding bpf_program__attach_uprobe_multi function that
allows to attach multiple uprobes with uprobe_multi link.
The user can specify uprobes with direct arguments:
binary_path/func_pattern/pid
or with struct bpf_uprobe_multi_opts opts argument fields:
const char **syms;
const unsigned long *offsets;
const unsigned long *ref_ctr_offsets;
const __u64 *cookies;
User can specify 2 mutually exclusive set of inputs:
1) use only path/func_pattern/pid arguments
2) use path/pid with allowed combinations of:
syms/offsets/ref_ctr_offsets/cookies/cnt
- syms and offsets are mutually exclusive
- ref_ctr_offsets and cookies are optional
Any other usage results in error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-15-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf_resolve_pattern_offsets function that looks up
offsets for symbols specified by pattern argument.
The 'pattern' argument allows wildcards (*?' supported).
Offsets are returned in allocated array together with its
size and needs to be released by the caller.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-13-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf symbol iterator object (and some functions) that follow
open-coded iterator pattern and some functions to ease up iterating
elf object symbols.
The idea is to iterate single symbol section with:
struct elf_sym_iter iter;
struct elf_sym *sym;
if (elf_sym_iter_new(&iter, elf, binary_path, SHT_DYNSYM))
goto error;
while ((sym = elf_sym_iter_next(&iter))) {
...
}
I considered opening the elf inside the iterator and iterate all symbol
sections, but then it gets more complicated wrt user checks for when
the next section is processed.
Plus side is the we don't need 'exit' function, because caller/user is
in charge of that.
The returned iterated symbol object from elf_sym_iter_next function
is placed inside the struct elf_sym_iter, so no extra allocation or
argument is needed.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to specify pid for uprobe_multi link and the uprobes
are created only for task with given pid value.
Using the consumer.filter filter callback for that, so the task gets
filtered during the uprobe installation.
We still need to check the task during runtime in the uprobe handler,
because the handler could get executed if there's another system
wide consumer on the same uprobe (thanks Oleg for the insight).
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to specify cookies array for uprobe_multi link.
The cookies array share indexes and length with other uprobe_multi
arrays (offsets/ref_ctr_offsets).
The cookies[i] value defines cookie for i-the uprobe and will be
returned by bpf_get_attach_cookie helper when called from ebpf
program hooked to that specific uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new multi uprobe link that allows to attach bpf program
to multiple uprobes.
Uprobes to attach are specified via new link_create uprobe_multi
union:
struct {
__aligned_u64 path;
__aligned_u64 offsets;
__aligned_u64 ref_ctr_offsets;
__u32 cnt;
__u32 flags;
} uprobe_multi;
Uprobes are defined for single binary specified in path and multiple
calling sites specified in offsets array with optional reference
counters specified in ref_ctr_offsets array. All specified arrays
have length of 'cnt'.
The 'flags' supports single bit for now that marks the uprobe as
return probe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Syncing latest libbpf commits from kernel repository.
Baseline bpf-next commit: a3e7e6b17946f48badce98d7ac360678a0ea7393
Checkpoint bpf-next commit: 0a55264cf966fb95ebf9d03d9f81fa992f069312
Baseline bpf commit: 496720b7cfb6574a8f6f4d434f23e3d1e6cfaeb9
Checkpoint bpf commit: 23d775f12dcd23d052a4927195f15e970e27ab26
Alan Maguire (1):
bpf: sync tools/ uapi header with
Arnaldo Carvalho de Melo (1):
tools headers uapi: Sync linux/fcntl.h with the kernel sources
Daniel Borkmann (5):
bpf: Add generic attach/detach/query API for multi-progs
bpf: Add fd-based tcx multi-prog infra with link support
libbpf: Add opts-based attach/detach/query API for tcx
libbpf: Add link-based API for tcx
libbpf: Add helper macro to clear opts structs
Daniel Xu (1):
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
Dave Marchevsky (1):
libbpf: Support triple-underscore flavors for kfunc relocation
Jiri Olsa (1):
bpf: Add support for bpf_get_func_ip helper for uprobe program
Lorenz Bauer (1):
bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign
Maciej Fijalkowski (1):
xsk: add new netlink attribute dedicated for ZC max frags
Magnus Karlsson (2):
selftests/xsk: transmit and receive multi-buffer packets
selftests/xsk: add basic multi-buffer test
Marco Vedovati (1):
libbpf: Set close-on-exec flag on gzopen
Sergey Kacheev (1):
libbpf: Use local includes inside the library
Stanislav Fomichev (1):
ynl: regenerate all headers
Yafang Shao (2):
bpf: Support ->fill_link_info for kprobe_multi
bpf: Support ->fill_link_info for perf_event
Yonghong Song (1):
bpf: Support new sign-extension load insns
include/uapi/linux/bpf.h | 128 +++++++++++++++++++++++++++++++-----
include/uapi/linux/fcntl.h | 5 ++
include/uapi/linux/if_xdp.h | 9 +++
include/uapi/linux/netdev.h | 4 +-
src/bpf.c | 127 ++++++++++++++++++++++++-----------
src/bpf.h | 97 +++++++++++++++++++++++----
src/bpf_tracing.h | 2 +-
src/libbpf.c | 94 +++++++++++++++++++++-----
src/libbpf.h | 18 ++++-
src/libbpf.map | 2 +
src/libbpf_common.h | 16 +++++
src/netlink.c | 5 ++
src/usdt.bpf.h | 4 +-
13 files changed, 423 insertions(+), 88 deletions(-)
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The function signature of kfuncs can change at any time due to their
intentional lack of stability guarantees. As kfuncs become more widely
used, BPF program writers will need facilities to support calling
different versions of a kfunc from a single BPF object. Consider this
simplified example based on a real scenario we ran into at Meta:
/* initial kfunc signature */
int some_kfunc(void *ptr)
/* Oops, we need to add some flag to modify behavior. No problem,
change the kfunc. flags = 0 retains original behavior */
int some_kfunc(void *ptr, long flags)
If the initial version of the kfunc is deployed on some portion of the
fleet and the new version on the rest, a fleetwide service that uses
some_kfunc will currently need to load different BPF programs depending
on which some_kfunc is available.
Luckily CO-RE provides a facility to solve a very similar problem,
struct definition changes, by allowing program writers to declare
my_struct___old and my_struct___new, with ___suffix being considered a
'flavor' of the non-suffixed name and being ignored by
bpf_core_type_exists and similar calls.
This patch extends the 'flavor' facility to the kfunc extern
relocation process. BPF program writers can now declare
extern int some_kfunc___old(void *ptr)
extern int some_kfunc___new(void *ptr, int flags)
then test which version of the kfunc exists with bpf_ksym_exists.
Relocation and verifier's dead code elimination will work in concert as
expected, allowing this pattern:
if (bpf_ksym_exists(some_kfunc___old))
some_kfunc___old(ptr);
else
some_kfunc___new(ptr, 0);
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230817225353.2570845-1-davemarchevsky@fb.com
Enable the close-on-exec flag when using gzopen. This is especially important
for multithreaded programs making use of libbpf, where a fork + exec could
race with libbpf library calls, potentially resulting in a file descriptor
leaked to the new process. This got missed in 59842c5451fe ("libbpf: Ensure
libbpf always opens files with O_CLOEXEC").
Fixes: 59842c5451fe ("libbpf: Ensure libbpf always opens files with O_CLOEXEC")
Signed-off-by: Marco Vedovati <marco.vedovati@crowdstrike.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230810214350.106301-1-martin.kelly@crowdstrike.com
Adding support for bpf_get_func_ip helper for uprobe program to return
probed address for both uprobe and return uprobe.
We discussed this in [1] and agreed that uprobe can have special use
of bpf_get_func_ip helper that differs from kprobe.
The kprobe bpf_get_func_ip returns:
- address of the function if probe is attach on function entry
for both kprobe and return kprobe
- 0 if the probe is not attach on function entry
The uprobe bpf_get_func_ip returns:
- address of the probe for both uprobe and return uprobe
The reason for this semantic change is that kernel can't really tell
if the probe user space address is function entry.
The uprobe program is actually kprobe type program attached as uprobe.
One of the consequences of this design is that uprobes do not have its
own set of helpers, but share them with kprobes.
As we need different functionality for bpf_get_func_ip helper for uprobe,
I'm adding the bool value to the bpf_trace_run_ctx, so the helper can
detect that it's executed in uprobe context and call specific code.
The is_uprobe bool is set as true in bpf_prog_run_array_sleepable, which
is currently used only for executing bpf programs in uprobe.
Renaming bpf_prog_run_array_sleepable to bpf_prog_run_array_uprobe
to address that it's only used for uprobes and that it sets the
run_ctx.is_uprobe as suggested by Yafang Shao.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
[1] https://lore.kernel.org/bpf/CAEf4BzZ=xLVkG5eurEuvLU79wAMtwho7ReR+XJAgwhFF4M-7Cg@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-2-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In our monrepo, we try to minimize special processing when importing
(aka vendor) third-party source code. Ideally, we try to import
directly from the repositories with the code without changing it, we
try to stick to the source code dependency instead of the artifact
dependency. In the current situation, a patch has to be made for
libbpf to fix the includes in bpf headers so that they work directly
from libbpf/src.
Signed-off-by: Sergey Kacheev <s.kacheev@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/CAJVhQqUg6OKq6CpVJP5ng04Dg+z=igevPpmuxTqhsR3dKvd9+Q@mail.gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This commit adds support for enabling IP defrag using pre-existing
netfilter defrag support. Basically all the flag does is bump a refcnt
while the link the active. Checks are also added to ensure the prog
requesting defrag support is run _after_ netfilter defrag hooks.
We also take care to avoid any issues w.r.t. module unloading -- while
defrag is active on a link, the module is prevented from unloading.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/5cff26f97e55161b7d56b09ddcf5f8888a5add1d.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add interpreter/jit support for new sign-extension load insns
which adds a new mode (BPF_MEMSX).
Also add verifier support to recognize these insns and to
do proper verification with new insns. In verifier, besides
to deduce proper bounds for the dst_reg, probed memory access
is also properly handled.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011156.3711870-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT
sockets. This means we can't use the helper to steer traffic to Envoy,
which configures SO_REUSEPORT on its sockets. In turn, we're blocked
from removing TPROXY from our setup.
The reason that bpf_sk_assign refuses such sockets is that the
bpf_sk_lookup helpers don't execute SK_REUSEPORT programs. Instead,
one of the reuseport sockets is selected by hash. This could cause
dispatch to the "wrong" socket:
sk = bpf_sk_lookup_tcp(...) // select SO_REUSEPORT by hash
bpf_sk_assign(skb, sk) // SK_REUSEPORT wasn't executed
Fixing this isn't as simple as invoking SK_REUSEPORT from the lookup
helpers unfortunately. In the tc context, L2 headers are at the start
of the skb, while SK_REUSEPORT expects L3 headers instead.
Instead, we execute the SK_REUSEPORT program when the assigned socket
is pulled out of the skb, further up the stack. This creates some
trickiness with regards to refcounting as bpf_sk_assign will put both
refcounted and RCU freed sockets in skb->sk. reuseport sockets are RCU
freed. We can infer that the sk_assigned socket is RCU freed if the
reuseport lookup succeeds, but convincing yourself of this fact isn't
straight forward. Therefore we defensively check refcounting on the
sk_assign sock even though it's probably not required in practice.
Fixes: 8e368dc72e86 ("bpf: Fix use of sk->sk_reuseport from sk_assign")
Fixes: cf7fbe660f2d ("bpf: Add socket assign support")
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Stringer <joe@cilium.io>
Link: https://lore.kernel.org/bpf/CACAyw98+qycmpQzKupquhkxbvWK4OFyDuuLMBNROnfWMZxUWeA@mail.gmail.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-7-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Seeing the following:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
...so sync tools version missing some list_node/rb_tree fields.
Fixes: c3c510ce431c ("bpf: Add 'owner' field to bpf_{list,rb}_node")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20230719162257.20818-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a small and generic LIBBPF_OPTS_RESET() helper macros which clears an
opts structure and reinitializes its .sz member to place the structure
size. Additionally, the user can pass option-specific data to reinitialize
via varargs.
I found this very useful when developing selftests, but it is also generic
enough as a macro next to the existing LIBBPF_OPTS() which hides the .sz
initialization, too.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230719140858.13224-6-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement tcx BPF link support for libbpf.
The bpf_program__attach_fd() API has been refactored slightly in order to pass
bpf_link_create_opts pointer as input.
A new bpf_program__attach_tcx() has been added on top of this which allows for
passing all relevant data via extensible struct bpf_tcx_opts.
The program sections tcx/ingress and tcx/egress correspond to the hook locations
for tc ingress and egress, respectively.
For concrete usage examples, see the extensive selftests that have been
developed as part of this series.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-5-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend libbpf attach opts and add a new detach opts API so this can be used
to add/remove fd-based tcx BPF programs. The old-style bpf_prog_detach() and
bpf_prog_detach2() APIs are refactored to reuse the new bpf_prog_detach_opts()
internally.
The bpf_prog_query_opts() API got extended to be able to handle the new
link_ids, link_attach_flags and revision fields.
For concrete usage examples, see the extensive selftests that have been
developed as part of this series.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work refactors and adds a lightweight extension ("tcx") to the tc BPF
ingress and egress data path side for allowing BPF program management based
on fds via bpf() syscall through the newly added generic multi-prog API.
The main goal behind this work which we also presented at LPC [0] last year
and a recent update at LSF/MM/BPF this year [3] is to support long-awaited
BPF link functionality for tc BPF programs, which allows for a model of safe
ownership and program detachment.
Given the rise in tc BPF users in cloud native environments, this becomes
necessary to avoid hard to debug incidents either through stale leftover
programs or 3rd party applications accidentally stepping on each others toes.
As a recap, a BPF link represents the attachment of a BPF program to a BPF
hook point. The BPF link holds a single reference to keep BPF program alive.
Moreover, hook points do not reference a BPF link, only the application's
fd or pinning does. A BPF link holds meta-data specific to attachment and
implements operations for link creation, (atomic) BPF program update,
detachment and introspection. The motivation for BPF links for tc BPF programs
is multi-fold, for example:
- From Meta: "It's especially important for applications that are deployed
fleet-wide and that don't "control" hosts they are deployed to. If such
application crashes and no one notices and does anything about that, BPF
program will keep running draining resources or even just, say, dropping
packets. We at FB had outages due to such permanent BPF attachment
semantics. With fd-based BPF link we are getting a framework, which allows
safe, auto-detachable behavior by default, unless application explicitly
opts in by pinning the BPF link." [1]
- From Cilium-side the tc BPF programs we attach to host-facing veth devices
and phys devices build the core datapath for Kubernetes Pods, and they
implement forwarding, load-balancing, policy, EDT-management, etc, within
BPF. Currently there is no concept of 'safe' ownership, e.g. we've recently
experienced hard-to-debug issues in a user's staging environment where
another Kubernetes application using tc BPF attached to the same prio/handle
of cls_bpf, accidentally wiping all Cilium-based BPF programs from underneath
it. The goal is to establish a clear/safe ownership model via links which
cannot accidentally be overridden. [0,2]
BPF links for tc can co-exist with non-link attachments, and the semantics are
in line also with XDP links: BPF links cannot replace other BPF links, BPF
links cannot replace non-BPF links, non-BPF links cannot replace BPF links and
lastly only non-BPF links can replace non-BPF links. In case of Cilium, this
would solve mentioned issue of safe ownership model as 3rd party applications
would not be able to accidentally wipe Cilium programs, even if they are not
BPF link aware.
Earlier attempts [4] have tried to integrate BPF links into core tc machinery
to solve cls_bpf, which has been intrusive to the generic tc kernel API with
extensions only specific to cls_bpf and suboptimal/complex since cls_bpf could
be wiped from the qdisc also. Locking a tc BPF program in place this way, is
getting into layering hacks given the two object models are vastly different.
We instead implemented the tcx (tc 'express') layer which is an fd-based tc BPF
attach API, so that the BPF link implementation blends in naturally similar to
other link types which are fd-based and without the need for changing core tc
internal APIs. BPF programs for tc can then be successively migrated from classic
cls_bpf to the new tc BPF link without needing to change the program's source
code, just the BPF loader mechanics for attaching is sufficient.
For the current tc framework, there is no change in behavior with this change
and neither does this change touch on tc core kernel APIs. The gist of this
patch is that the ingress and egress hook have a lightweight, qdisc-less
extension for BPF to attach its tc BPF programs, in other words, a minimal
entry point for tc BPF. The name tcx has been suggested from discussion of
earlier revisions of this work as a good fit, and to more easily differ between
the classic cls_bpf attachment and the fd-based one.
For the ingress and egress tcx points, the device holds a cache-friendly array
with program pointers which is separated from control plane (slow-path) data.
Earlier versions of this work used priority to determine ordering and expression
of dependencies similar as with classic tc, but it was challenged that for
something more future-proof a better user experience is required. Hence this
resulted in the design and development of the generic attach/detach/query API
for multi-progs. See prior patch with its discussion on the API design. tcx is
the first user and later we plan to integrate also others, for example, one
candidate is multi-prog support for XDP which would benefit and have the same
'look and feel' from API perspective.
The goal with tcx is to have maximum compatibility to existing tc BPF programs,
so they don't need to be rewritten specifically. Compatibility to call into
classic tcf_classify() is also provided in order to allow successive migration
or both to cleanly co-exist where needed given its all one logical tc layer and
the tcx plus classic tc cls/act build one logical overall processing pipeline.
tcx supports the simplified return codes TCX_NEXT which is non-terminating (go
to next program) and terminating ones with TCX_PASS, TCX_DROP, TCX_REDIRECT.
The fd-based API is behind a static key, so that when unused the code is also
not entered. The struct tcx_entry's program array is currently static, but
could be made dynamic if necessary at a point in future. The a/b pair swap
design has been chosen so that for detachment there are no allocations which
otherwise could fail.
The work has been tested with tc-testing selftest suite which all passes, as
well as the tc BPF tests from the BPF CI, and also with Cilium's L4LB.
Thanks also to Nikolay Aleksandrov and Martin Lau for in-depth early reviews
of this work.
[0] https://lpc.events/event/16/contributions/1353/
[1] https://lore.kernel.org/bpf/CAEf4BzbokCJN33Nw_kg82sO=xppXnKWEncGTWCTB9vGCmLB6pw@mail.gmail.com
[2] https://colocatedeventseu2023.sched.com/event/1Jo6O/tales-from-an-ebpf-programs-murder-mystery-hemanth-malla-guillaume-fournier-datadog
[3] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
[4] https://lore.kernel.org/bpf/20210604063116.234316-1-memxor@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds a generic layer called bpf_mprog which can be reused by different
attachment layers to enable multi-program attachment and dependency resolution.
In-kernel users of the bpf_mprog don't need to care about the dependency
resolution internals, they can just consume it with few API calls.
The initial idea of having a generic API sparked out of discussion [0] from an
earlier revision of this work where tc's priority was reused and exposed via
BPF uapi as a way to coordinate dependencies among tc BPF programs, similar
as-is for classic tc BPF. The feedback was that priority provides a bad user
experience and is hard to use [1], e.g.:
I cannot help but feel that priority logic copy-paste from old tc, netfilter
and friends is done because "that's how things were done in the past". [...]
Priority gets exposed everywhere in uapi all the way to bpftool when it's
right there for users to understand. And that's the main problem with it.
The user don't want to and don't need to be aware of it, but uapi forces them
to pick the priority. [...] Your cover letter [0] example proves that in
real life different service pick the same priority. They simply don't know
any better. Priority is an unnecessary magic that apps _have_ to pick, so
they just copy-paste and everyone ends up using the same.
The course of the discussion showed more and more the need for a generic,
reusable API where the "same look and feel" can be applied for various other
program types beyond just tc BPF, for example XDP today does not have multi-
program support in kernel, but also there was interest around this API for
improving management of cgroup program types. Such common multi-program
management concept is useful for BPF management daemons or user space BPF
applications coordinating internally about their attachments.
Both from Cilium and Meta side [2], we've collected the following requirements
for a generic attach/detach/query API for multi-progs which has been implemented
as part of this work:
- Support prog-based attach/detach and link API
- Dependency directives (can also be combined):
- BPF_F_{BEFORE,AFTER} with relative_{fd,id} which can be {prog,link,none}
- BPF_F_ID flag as {fd,id} toggle; the rationale for id is so that user
space application does not need CAP_SYS_ADMIN to retrieve foreign fds
via bpf_*_get_fd_by_id()
- BPF_F_LINK flag as {prog,link} toggle
- If relative_{fd,id} is none, then BPF_F_BEFORE will just prepend, and
BPF_F_AFTER will just append for attaching
- Enforced only at attach time
- BPF_F_REPLACE with replace_bpf_fd which can be prog, links have their
own infra for replacing their internal prog
- If no flags are set, then it's default append behavior for attaching
- Internal revision counter and optionally being able to pass expected_revision
- User space application can query current state with revision, and pass it
along for attachment to assert current state before doing updates
- Query also gets extension for link_ids array and link_attach_flags:
- prog_ids are always filled with program IDs
- link_ids are filled with link IDs when link was used, otherwise 0
- {prog,link}_attach_flags for holding {prog,link}-specific flags
- Must be easy to integrate/reuse for in-kernel users
The uapi-side changes needed for supporting bpf_mprog are rather minimal,
consisting of the additions of the attachment flags, revision counter, and
expanding existing union with relative_{fd,id} member.
The bpf_mprog framework consists of an bpf_mprog_entry object which holds
an array of bpf_mprog_fp (fast-path structure). The bpf_mprog_cp (control-path
structure) is part of bpf_mprog_bundle. Both have been separated, so that
fast-path gets efficient packing of bpf_prog pointers for maximum cache
efficiency. Also, array has been chosen instead of linked list or other
structures to remove unnecessary indirections for a fast point-to-entry in
tc for BPF.
The bpf_mprog_entry comes as a pair via bpf_mprog_bundle so that in case of
updates the peer bpf_mprog_entry is populated and then just swapped which
avoids additional allocations that could otherwise fail, for example, in
detach case. bpf_mprog_{fp,cp} arrays are currently static, but they could
be converted to dynamic allocation if necessary at a point in future.
Locking is deferred to the in-kernel user of bpf_mprog, for example, in case
of tcx which uses this API in the next patch, it piggybacks on rtnl.
An extensive test suite for checking all aspects of this API for prog-based
attach/detach and link API comes as BPF selftests in this series.
Thanks also to Andrii Nakryiko for early API discussions wrt Meta's BPF prog
management.
[0] https://lore.kernel.org/bpf/20221004231143.19190-1-daniel@iogearbox.net
[1] https://lore.kernel.org/bpf/CAADnVQ+gEY3FjCR=+DmjDR4gp5bOYZUFJQXj4agKFHT9CQPZBw@mail.gmail.com
[2] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230719140858.13224-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the first basic multi-buffer test that sends a stream of 9K
packets and validates that they are received at the other end. In
order to enable sending and receiving multi-buffer packets, code that
sets the MTU is introduced as well as modifications to the XDP
programs so that they signal that they are multi-buffer enabled.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-20-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the ability to send and receive packets that are larger than the
size of a umem frame, using the AF_XDP /XDP multi-buffer
support. There are three pieces of code that need to be changed to
achieve this: the Rx path, the Tx path, and the validation logic.
Both the Rx path and Tx could only deal with a single fragment per
packet. The Tx path is extended with a new function called
pkt_nb_frags() that can be used to retrieve the number of fragments a
packet will consume. We then create these many fragments in a loop and
fill the N-1 first ones to the max size limit to use the buffer space
efficiently, and the Nth one with whatever data that is left. This
goes on until we have filled in at the most BATCH_SIZE worth of
descriptors and fragments. If we detect that the next packet would
lead to BATCH_SIZE number of fragments sent being exceeded, we do not
send this packet and finish the batch. This packet is instead sent in
the next iteration of BATCH_SIZE fragments.
For Rx, we loop over all fragments we receive as usual, but for every
descriptor that we receive we call a new validation function called
is_frag_valid() to validate the consistency of this fragment. The code
then checks if the packet continues in the next frame. If so, it loops
over the next packet and performs the same validation. once we have
received the last fragment of the packet we also call the function
is_pkt_valid() to validate the packet as a whole. If we get to the end
of the batch and we are not at the end of the current packet, we back
out the partial packet and end the loop. Once we get into the receive
loop next time, we start over from the beginning of that packet. This
so the code becomes simpler at the cost of some performance.
The validation function is_frag_valid() checks that the sequence and
packet numbers are correct at the start and end of each fragment.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-19-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce new netlink attribute NETDEV_A_DEV_XDP_ZC_MAX_SEGS that will
carry maximum fragments that underlying ZC driver is able to handle on
TX side. It is going to be included in netlink response only when driver
supports ZC. Any value higher than 1 implies multi-buffer ZC support on
underlying device.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-11-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
By introducing support for ->fill_link_info to the perf_event link, users
gain the ability to inspect it using `bpftool link show`. While the current
approach involves accessing this information via `bpftool perf show`,
consolidating link information for all link types in one place offers
greater convenience. Additionally, this patch extends support to the
generic perf event, which is not currently accommodated by
`bpftool perf show`. While only the perf type and config are exposed to
userspace, other attributes such as sample_period and sample_freq are
ignored. It's important to note that if kptr_restrict is not permitted, the
probed address will not be exposed, maintaining security measures.
A new enum bpf_perf_event_type is introduced to help the user understand
which struct is relevant.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-9-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the addition of support for fill_link_info to the kprobe_multi link,
users will gain the ability to inspect it conveniently using the
`bpftool link show`. This enhancement provides valuable information to the
user, including the count of probed functions and their respective
addresses. It's important to note that if the kptr_restrict setting is not
permitted, the probed address will not be exposed, ensuring security.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-08-21 13:27:45 -07:00
70 changed files with 96793 additions and 94900 deletions
Please note that the `libbpf` authoritative source code is developed as part of bpf-next Linux source tree under tools/lib/bpf subdirectory and is periodically synced to Github. As such, all the libbpf changes should be sent to BPF mailing list, please don't open PRs here unless you are changing Github-specific parts of libbpf (e.g., Github-specific Makefile).
test_ima # All of CI is broken on it following 6.3-rc1 merge
lwt_reroute # crashes kernel after netnext merge from 2ab1efad60ad "net/sched: cls_api: complement tcf_tfilter_dump_policy"
tc_links_ingress # started failing after net-next merge from 2ab1efad60ad "net/sched: cls_api: complement tcf_tfilter_dump_policy"
xdp_bonding/xdp_bonding_features # started failing after net merge from 359e54a93ab4 "l2tp: pass correct message length to ip6_append_data"
tc_redirect/tc_redirect_dtime # uapi breakage after net-next commit 885c36e59f46 ("net: Re-use and set mono_delivery_time bit for userspace tstamp packets")
migrate_reuseport/IPv4 TCP_NEW_SYN_RECV reqsk_timer_handler # flaky, under investigation
migrate_reuseport/IPv6 TCP_NEW_SYN_RECV reqsk_timer_handler # flaky, under investigation
pr_warn("usdt: failed to attach uprobe multi for '%s:%s' in '%s': %d\n",
usdt_provider,usdt_name,path,err);
gotoerr_out;
}
link->uprobes[i].link=uprobe_link;
link->uprobes[i].abs_ip=target->abs_ip;
link->uprobe_cnt++;
free(offsets);
free(ref_ctr_offsets);
free(cookies);
}
free(targets);
hashmap__free(specs_hash);
elf_end(elf);
close(fd);
elf_close(&elf_fd);
return&link->link;
err_out:
free(offsets);
free(ref_ctr_offsets);
free(cookies);
if(link)
bpf_link__destroy(&link->link);
free(targets);
hashmap__free(specs_hash);
if(elf)
elf_end(elf);
close(fd);
elf_close(&elf_fd);
returnlibbpf_err_ptr(err);
}
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
